Casablanca 42900-01W Bedienungsanleitung

www.CasablancaFanCo.com 1.888.227.2178

PAGE

30 inches

7 feet

PAGE

What to Expect with

Your Installation

Ladder

PAGE

Tools Needed

Operation Maintenance

& Cleaning TroubleshootingLight Kit

PAGE

Hanging the Fan

PAGE

Table of Contents

PAGE

Ceiling Plate

Congratulations on purchasing your new Casablanca®

ceiling fan! It will provide comfort and performance

in your home or ofce for many years. This installation

and operation manual contains complete instructions

for installing and operating your fan.

We are proud of our work and appreciate the

opportunity to supply you with the best ceiling fan

available anywhere in the world.

To register your fan, please visit:

www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

PAGE

Wiring Canopy

PAGE

Wall Control

PAGE

Blades

www.CasablancaFanCo.com 1.888.227.2178

What to Expect with Your Installation

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

30 inches

from blade tip to

nearest wall or

obstruction 7 feet

from bottom

edge of blade

to the oor

w.1 - To reduce the risk of re, electrical shock, or personal

injury, mount fan directly from building structure and/or an

outlet box marked acceptable for fan support of 70 lbs (31.8 kg)

and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the

circuit breakers to the outlet box and associated wall switch

location. If you cannot lock the circuit breakers in the off

position, securely fasten a prominent warning device, such as a

tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage,

use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades,

or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

c.1 - All wiring must be in accordance with national and local

electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,

use a qualied electrician.

c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions may cause

harmful interference to radio communications.

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

Must be able to

secure the fan to

building structure or

fan-rated outlet box

www.CasablancaFanCo.com 1.888.227.2178

Tools Needed

Power Drill

(optional)

9/64” Drill

Bit (optional)

Ladder Wire Strippers

If mounting to a support structure, you will also need these tools.

Screwdriver

(included)

www.CasablancaFanCo.com 1.888.227.21781.888.227.2178

www.CasablancaFanCo.com

Ceiling Plate

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before installing your fan,

disconnect the power by turning off the circuit breakers to the

outlet box associated with the wall switch location.

OFF

Turn Power

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid

in securing ceiling plate

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70

lbs) or less.

Make sure all four bumpers are

still attached.

Bumper

www.CasablancaFanCo.com 1.888.227.2178

DO NOT PICK THE FAN UP BY THE

WIRES. Use the hanging hole on the

body of the fan to hang the fan on the

hook of the ceiling mounting plate.

Unlock the canopy cover from the canopy

ring tabs to loosen the canopy ring and

lower it down to the fan body as shown.

Hanging the Fan

www.CasablancaFanCo.com 1.888.227.2178

Wiring

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

Note: To connect the wires, hold

the bare metal leads together and

place a wire connector over them,

then twist clockwise until tight.

Using an orange wire connector

from the hardware bag:

Connect the 3 grounding wires

(green, green/yellow stripe, or bare

copper) coming from the ceiling,

downrod, and ceiling bracket.

green/yellow

stripe (grounding)

green

Using an orange wire connector:

• Connect the black (ungrounded)

wire from the ceiling to the black

wire from the fan/receiver.

• Connect the white (grounded)

wire from the ceiling to the white

wire from the fan/receiver.

black

(ungrounded)

white (grounded)

black

white

www.CasablancaFanCo.com 1.888.227.2178

1. Using a 9/64 drill bit, drill a hole

in each screw cut-out on the wall

control template.

2. Using a hammer, tap a drywall

anchor found in the wall control

hardware bag into each hole

until the drywall anchor is ush

with the wall.

1. Using a drywall punch saw,

cut out the interior shape of

the template using one of

the four drilled corners as a

starting point.

2. Remove the template and the

cut-out section of drywall.

1. Insert the wall control into the

dry wall cut out.

2. Align the screw holes in the wall

control with the drywall anchors.

3. Install the cover plate using

a Phillips Head screwdriver

to secure the two cover plate

screws found in the wall control

hardware bag through the wall

control and into the drywall

anchors.

Wall Control

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

If you are using a outlet box for wall control installation, the wires coming from the wall

control must be grounded using the attached green wire. If not placed in an outlet box, cap

the green wire coming from the wall control with an included wire nut.

1. Tape the provided wall control

template with painter’s tape at

the desired installation area.

2. Drill holes inside the four

corners of the template.

Note: Make sure the wall

control template is level before

proceeding to the next step.

Template

Drywall

Before

After

Cover Plate

Template

Drill Holes

Painter’s

Tape Template

Drywall

Anchors

Screw

Cut-Out

www.CasablancaFanCo.com 1.888.227.2178

Canopy

Partially install two of the canopy screws,

found in the hardware bag, into screw

holes on opposite corners of the ceiling

plate as shown. Choose the two screw holes

that are aligned with the hanging slots in

the fan body.

Using both hands, lift the fan body from the

hook and align the hanging slots on both sides

of the fan body with the two partially installed

canopy screws. Slide the two slots on both

sides of the fan body between the head of the

screws and rotate the fan body clockwise so the

screws hold the fan body rmly in place.

Install the remaining two canopy screws,

found in the hardware bag, by holding

the fan body cover to the ceiling mounting

plate. Tighten all four screws securely.

Hanging Slot

Canopy Screw

www.CasablancaFanCo.com 1.888.227.2178

Canopy (continued)

To install the canopy ring, lift the

canopy, then rotate clockwise until

the tabs are held in place by the

tab holders, locking the canopy

ring into place.

To check your work, make sure

there is an even gap all the way

around between the ceiling and

the canopy ring.

Before going to the next step, locate

the two sets of canopy ring tabs that

are on the top edge of the canopy

and the two sets of canopy tab

holders found at the top of the fan

body near the ceiling.

Canopy

Ring

Tabs

Canopy

Tab

Holders

www.CasablancaFanCo.com 1.888.227.2178

Install the blade using three blade screws

and washers, found in the hardware bag.

Repeat this process for all ve blades.

Blades

Slide a blade into a slot located on the blade ring.

Note: The blades will only t properly over the

screws holes one way. If the holes do not line up,

remove the blade and turn it over.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Casablanca Lüfter Handbücher

Casablanca

Casablanca Ainsworth 55005 Bedienungsanleitung

Casablanca

Casablanca C31uxxB Bedienungsanleitung

Casablanca

Casablanca Durant Gebrauchsanweisung

Casablanca

Casablanca 59503 Gebrauchsanweisung

Casablanca

Casablanca Stealth Bedienungsanleitung

Casablanca

Casablanca M8539-01 Bedienungsanleitung

Casablanca

Casablanca 59287 Gebrauchsanweisung

Casablanca

Casablanca S3 Bedienungsanleitung

Casablanca

Casablanca 59090 Gebrauchsanweisung

Casablanca

Casablanca Le Grande Bedienungsanleitung

Casablanca

Casablanca Ainsworth Gebrauchsanweisung

Casablanca

Casablanca Stealth 59091 Bedienungsanleitung

Casablanca

Casablanca 59081 Gebrauchsanweisung

Casablanca

Casablanca CEILING FAN Bedienungsanleitung

Casablanca

Casablanca New Orleans Centennial Bedienungsanleitung

Casablanca

Casablanca Caledonia Gebrauchsanweisung

Casablanca

Casablanca WHITMAN Gebrauchsanweisung

Casablanca

Casablanca Utopian 54035 Bedienungsanleitung

Casablanca

Casablanca WHITMAN Bedienungsanleitung

Casablanca

Casablanca Ceiling fans Bedienungsanleitung

Casablanca

Casablanca Candelier Bedienungsanleitung

Casablanca

Casablanca M8501-01 Bedienungsanleitung

Casablanca

Casablanca Four Seasons III Hugger Bedienungsanleitung

Casablanca

Casablanca CEILING FAN Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung