Casio CFX-9850G PLUS Gebrauchs- und Pflegehandbuch

Data Communications

This chapter tells you everything you need to know to transfer

programs between the CASIO Power Graphic unit and another

CASIO Power Graphic unit, connected with an optionally avail-

able SB-62 cable. To transfer data between a unit and a personal

computer, you will need to purchase the separately available

CASIO FA-123 Interface Unit.

This chapter also contains information on how to use the optional

SB-62 cable to connect to a CASIO Label Printer to transfer

screen data for printing.

21-1 Connecting Two Units

21-2 Connecting the Unit with a Personal Computer

21-3 Connecting the Unit with a CASIO Label Printer

21-4 Before Performing a Data Communication Operation

21-5 Performing a Data Transfer Operation

21-6 Screen Send Function

21-7 Data Communications Precautions

Chapter

400

21-1 Connecting Two Units

The following procedure describes how to connect two units with an optional SB-

62 connecting cable for transfer of programs between them.

uTo connect two units

1. Check to make sure that the power of both units is off.

2. Remove the covers from the connectors of the two units.

•Be sure you keep the connector covers in a safe place so you can replace

them after you finish your data communications.

3. Connect the two units using the SB-62 cable.

SB-62 cable

•Keep the connectors covered when you are not using them.

401

21-2 Connecting the Unit with a Personal

Computer

To transfer data between the unit and a personal computer, you must connect

them through a separately available CASIO FA-123 connection cable.

For details on operation, the types of computer that can be connected, and

hardware limitations, see the user’s manual that comes with the FA-123.

Some types of data may not be able to be exchanged with a personal computer.

uTo connect the unit with a personal computer

1. Check to make sure that the power of the unit and the personal computer is off.

2. Connect the FA-123 connection cable to the personal computer.

3. Remove the cover from the connector of the unit.

•Be sure you keep the connector cover in a safe place so you can replace it

after you finish your data communications.

4. Connect the FA-123 connection cable to the unit.

5. Turn on the power of the unit, followed by the personal computer.

•After you finish data communications, turn off power in the sequence: the unit

first, and then the personal computer. Finally, disconnect the equipment.

402

21-3 Connecting the Unit with a CASIO Label

Printer

After you connect the unit to a CASIO Label Printer with an optional SB-62 cable,

you can use the Label Printer to print screen shot data from the unit. See the

user’s guide that comes with your Label Printer for details on how to perform this

operation.

•The operation described above can be performed using the following Label

Printer models: KL-2000, KL-2700, KL-8200, KL-8700, KL-8800 (as of April

2001).

uTo connect the unit with a Label Printer

1. Check to make sure that the power of the unit and the Label Printer is off.

2. Connect the optional SB-62 cable to the Label Printer.

3. Remove the cover from the connector of the unit.

•Be sure you keep the connector cover in a safe place so you can replace it

after you finish your data communications.

4. Connect the other end of the SB-62 cable to the unit.

5. Turn on the power of the unit, followed by the Label Printer.

Label Printer

SB-62 cable

•After you finish data communications, turn off power in the sequence: the unit

first, and then the Label Printer. Finally, disconnect the equipment.

403

21-4 Before Performing a Data Communication

Operation

In the Main Menu, select the LINK icon and enter the LINK Mode. The following

data communication main menu appears on the display.

P. 408 Image Set: .......... Indicates the status of the graphic image send features.

Off: Graphic images not sent.

Monochrome: Pressing Msends graphic images in

monochrome.

Color: Pressing Msends graphic images in color.

Do not select "Color" for Image Set to

send data to a Label Printer.

On: Pressing Msends graphic images in

monochrome.

• {TRAN}/{RECV} ... menu of {send settings}/{receive settings}

• {IMGE} ... {menu of graphic image transfer settings}

Communication parameters are fixed at the following settings.

•Speed (BPS): 9600 bits per second

•Parity (PARITY): NONE

CFX

fx-9750G

PLUS

404

21-5 Performing a Data Transfer Operation

Connect the two units and then perform the following procedures.

Receiving unit

To set up the calculator to receive data, press 2(RECV) while the data commu-

nication main menu is displayed.

The calculator enters a data receive standby mode and waits for data to arrive.

Actual data receive starts as soon as data is sent from the sending unit.

Sending unit

To set up the calculator to send data, press 1(TRAN) while the data communi-

cation main menu is displayed.

Press the function key that corresponds to the type of data you want to send.

• {SEL} ... {selects data items and sends them}

• {CRNT} ... {selects data items from among previously selected data items and

sends them}

• {BACK} ... {all memory contents, including mode settings}

uTo send selected data items

Press 1(SEL) or 2(CRNT) to display a data item selection screen.

Data item

405

• {SEL} ... {selects data item where cursor is located}

• {TRAN} ... {sends selected data items}

Use the fand ccursor keys to move the cursor to the data item you want to

select and press 1(SEL) to select it. Currently selected data items are marked

with “'”. Pressing 6(TRAN) sends all the selected data items.

•To deselect a data item, move the cursor to it and press 1(SEL) again.

Only items that contain data appear on the data item selection screen. If there are

too many data items to fit on a single screen, the list scrolls when you move the

cursor to the bottom line of the items on the screen.

The following types of data items can be sent.

Data Item Contents Overwrite Password

Check*1Check*2

Program Program contents Yes Yes

Mat nMatrix memory (A to Z) contents Yes

List nList memory (1 to 6) contents Yes

File nList file memory (1 to 6) contents Yes

Y=Data

Graph expressions, graph write/

non-write status, View Window No

contents, zoom factors

G-Mem nGraph memory (1 to 6) contents Yes

V-Win nView Window memory contents No

Picture nPicture (graph) memory (1 to 6) data No

DynaMem Dynamic Graph functions Yes

EquationEquation calculation coefficient values No

Variable Variable assignments No

F-Mem Function memory (1 to 6) contents No

*1No overwrite check: If the receiving unit already contains the same type of data, the

existing data is overwritten with the new data.

With overwrite check: If the receiving unit already contains the same type of data, a

message appears to ask if the existing data should be overwritten with the new data.

Performing a Data Transfer Operation 21 - 5

406

21 - 5 Performing a Data Transfer Operation

Data item name

• {YES} ... {replaces the receiving unit’s existing data with the new data}

• {NO} ... {skips to next data item}

*2With password check: If a file is password protected, a message appears

asking for input of the password.

Name of password protected file

Password input field

12345

• {SYBL} ... {symbol input}

After inputting the password, press w.

uTo execute a send operation

After selecting the data items to send, press 6(TRAN). A message appears to

confirm that you want to execute the send operation.

• {YES} ... {sends data}

• {NO} ... {returns to data selection screen}

Press 1(YES) to send the data.

•You can interrupt a data operation at any time by pressing A.

407

The following shows what the displays of the sending and receiving units look like

after the data communication operation is complete.

Sending Unit Receiving Unit

Press Ato return to the data communication main menu.

uTo send backup data

This operation allows you to send all memory contents, including mode settings.

While the send data type selection menu is on the screen, press 6(BACK), and

the back up send menu shown below appears.

Press 6(TRAN) to start the send operation.

The following shows what the displays of the sending and receiving units look like

after the data communication operation is complete.

Sending Unit Receiving Unit

Press Ato return to the data communication main menu.

•Data can become corrupted, necessitating a RESET of the receiving unit,

should the connecting cable become disconnected during data transfer.

Make sure that the cable is securely connected to both units before perform-

ing any data communication operation.

Performing a Data Transfer Operation 21 - 5

408

21-6 Screen Send Function

The following procedure sends a bit mapped screen shot of the display to a

connected computer.

uTo send the screen

P. 402 1. Connect the unit to a personal computer or to a CASIO Label Printer.

P. 403 2. In the data communication main menu, press 6(IMGE) and the following

display appears.

•{OFF} ... {graphic images not sent}

•{MONO}/{COLR} ... {monochrome}/{color} bitmap

•{ON} ... bitmap

3. Press a function key to specify either “Monochrome” or “Color” for the Image

Set Mode.

4. Display the screen you want to send.

5. Set up the personal computer or Label Printer to receive data. When the other

unit is ready to receive, press Mto start the send operation.

P. 403 •Selecting “Monochrome” for Image Set allows data to be sent to any CASIO

Label Printer equipped with data communications capabilities.

Selecting “Color” allows data to be sent to Color Label Printer models only.

You cannot send the following types of screens to a computer.

•The screen that appears while a data communication operation is in progress.

•Ascreen that appears while a calculation is in progress.

•The screen that appears following the reset operation.

•The low battery message.

•The flashing cursor is not included in the screen image that is sent from the

unit.

•If you send a screen shot of any of the screens that appear during the data

send operation, you will not be able to then use the sent screen to proceed

with the data send operation. You must exit the data send operation that

produced the screen you sent and restart the send operation before you can

send additional data.

•You cannot use 6mm wide tape to print a screen shot of a graph.

* The above shows the CFX-9850

GB PLUS screen.

CFX

fx-9750G

PLUS

CFX

Andere Handbücher für CFX-9850G PLUS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Casio Kalkulator Handbücher

Casio

Casio fx-CG50 Bedienungsanleitung

Casio

Casio FX-9750GII - SOFTWARE VERSION 2-00 Bedienungsanleitung

Casio

Casio FX-300ES PLUS Bedienungsanleitung

Casio

Casio HS-8VERA Bedienungsanleitung

Casio

Casio FX-82TL Bedienungsanleitung

Casio

Casio SF-5300E Fehlerbehebungshandbuch

Casio

Casio fx-7450G Bedienungsanleitung

Casio

Casio ALGEBRA FX 2.0 Gebrauchsanweisung

Casio

Casio DATA-CAL DC-150 Bedienungsanleitung

Casio

Casio fx-190 Bedienungsanleitung

Casio

Casio GX-12S Bedienungsanleitung

Casio

Casio DH-120 Bedienungsanleitung

Casio

Casio fx-350MS Installations- und Betriebshandbuch

Casio

Casio CFX-9800G Bedienungsanleitung

Casio

Casio FX-61F SCIENTIFIC CALCULATOR Bedienungsanleitung

Casio

Casio MJ-100T Bedienungsanleitung

Casio

Casio FR-2650T Bedienungsanleitung

Casio

Casio CFX-9800G-w - Color Graphing Calculator Bedienungsanleitung

Casio

Casio fx-CG50 Bedienungsanleitung

Casio

Casio fx-92B Bedienungsanleitung

Casio

Casio FX-7400GII Bedienungsanleitung

Casio

Casio DF-120BM Bedienungsanleitung

Casio

Casio fx-250 HA Bedienungsanleitung

Casio

Casio FX-100W Bedienungsanleitung

Beliebte Kalkulator Handbücher anderer Marken

HP 35s Handbuch

LEXIBOOK

LEXIBOOK EL350 Bedienungsanleitung

HP HP-97 Bedienungsanleitung

Citizen

Citizen SDC-414N Bedienungsanleitung

Canon

Canon P26-DHIII Bedienungsanleitung

Citizen

Citizen 520DPA Bedienungsanleitung

Sharp

Sharp EL-9900 Bedienungsanleitung

Sharp

Sharp WriteView EL-W506 Technisches Handbuch

HP HP-67 Benutzerhandbuch

Royal

Royal CBC2000 Bedienungsanleitung

Heathkit

Heathkit IC-2009 Bedienungsanleitung

Universal

Universal UNV-15907 Bedienungsanleitung

Sharp

Sharp EL-9650 Bedienungsanleitung

Sharp

Sharp EL2192RII - Printing Calculator Bedienungsanleitung

Ativa

Ativa AT-30i Bedienungsanleitung

HP StreamSmart 400 Bedienungsanleitung

HP 20b Business Consultant Bedienungsanleitung

HP 9g Bedienungsanleitung