Casio FX-9750G Bedienungsanleitung
Graph Solve
You can use any of the following methods to analyze function graphs
and approximate results.
•Root extraction
•Determination of the maximum and minimum
•Determination of the y-intercept
•Determination of the intersection of two graphs
•Determination of the coordinates at any point (yfor a given x/xfor
a given y)
•Determination of the integral for any range
9-1 Before Using Graph Solve
9-2 Analyzing a Function Graph
9-3 Graph Solve Precautions
Chapter
9
164
9-1 Before Using Graph Solve
After using the GRAPH Mode to draw the graph, press !5(G-Solv) to display
the graph solve menu.
!5(G-Solv)
1(ROOT) .... Root
2(MAX)....... Maximum
3(MIN) ........ Minimum
4(Y-ICPT) ... y-intercept
5(ISCT) ...... Intersections of two graphs
6(g) ........... Next menu
6(g)
1(Y-CAL) .... y-coordinate for a given x-coordinate
2(X-CAL).... x-coordinate for a given y-coordinate
3(∫dx).......... Integral for a given range
6(g) ........... Previous menu
123456
123456
165
9-2 Analyzing a Function Graph
The following two graphs are used for all of the examples in this section, except for
the example for determining the points of intersection for two graphs.
Memory location Y1 = x+ 1
Memory location Y2 = x(x+ 2)(x– 2)
Use the View Window to specify the following parameters.
(A) Xmin = –5 Ymin = –5 (B) Xmin = –6.3 Ymin = –3.1
Xmax = 5 Ymax = 5 Xmax = 6.3 Ymax = 3.1
Xscale = 1 Yscale = 1 Xscale = 1 Yscale = 1
kk
kk
kDetermining Roots
Example To determine the roots for y= x(x+ 2)(x– 2)
View Window: (B)
!5(G-Solv)
1(ROOT)
(This puts the unit into standby waiting
for selection of a graph.)
•A“k” cursor appears on the graph that has the lowest memory area number.
Specify the graph you want to use.
c
• Use fand cto move the cursor to the
graph whose roots you want to find.
Determine the root.
w
• Roots are found starting from the left.
123456
166
Search for the next root to the right.
e
• If there is no root to the right, nothing happens
when you press e.
e
• You can use dto move back to the left.
• If there is only one graph, pressing 1(ROOT) directly displays the root (selec-
tion of the graph is not required).
• Note that the above operation can be performed on rectangular coordinate (Y=)
and inequality graphs only.
kk
kk
kDetermining Maximums and Minimums
Example To determine the maximum and minimum for y= x(x+ 2) (x– 2)
View Window: (A)
!5(G-Solv)
2(MAX)
(This puts the unit into standby waiting
for selection of a graph.)
Specify the graph and determine the maximum.
cw
9 - 2 Analyzing a Function Graph
123456
167
!5(G-Solv)
Specify the graph and determine the minimum.
3(MIN) cw
• If there is more than one maximum/minimum, you can use dand eto move
between them.
• If there is only one graph, pressing 2(MAX) / 3(MIN) directly displays the
maximum/minimum (selection of the graph is not required).
• Note that the above operation can be performed on rectangular coordinate (Y=)
and inequality graphs only.
kk
kk
kDetermining y-intercepts
Example To determine the y-intercept for y= x+ 1
View Window: (B)
!5(G-Solv)
4(Y-ICPT)
(This puts the unit into standby waiting
for selection of a graph.)
Determine the y-intercept.
w
•y-intercepts are the points that the graph intersects the y-axis.
• If there is only one graph, pressing 4(Y-ICPT) directly displays the y-intercepts
(selection of the graph is not required).
• Note that the above operation can be performed on rectangular coordinate (Y=)
and inequality graphs only.
123456
Analyzing a Function Graph 9 - 2
123456
168
kk
kk
kDetermining Points of Intersection for Two Graphs
Example To draw the following three graphs and then determine the points
of intersection for the Graph A and Graph C.
View Window: (A)
Graph A: y= x+ 1
Graph B: y= x(x+ 2) (x– 2)
Graph C: y= x2
!5(G-Solv)
5(ISCT)
(This puts the unit into standby waiting
for selection of a graph.)
Specify GraphA.
w
• Pressing wchanges “ k” into “ ◆” for speci-
fication of the first graph.
Specify the second graph (Graph C, here) to determine the points of intersection.
cw
• Use fand cto move “ k” on the second
graph.
• Intersections are found starting from the left.
e
• The next intersection to the right is found. If
there is no intersection to the right, nothing
happens when you perform this operation.
• You can use dto move back to the left.
• If there are only two graphs, pressing 5(ISCT) directly displays the intersec-
tions (selection of the graph is not required).
9 - 2 Analyzing a Function Graph
123456
169
• Note that the above operation can be performed on rectangular coordinate (Y=)
and inequality graphs only.
kk
kk
kDetermining a Coordinate (xfor a given y/yfor a given x)
Example To determine the y-coordinate for x= 0.5 and the x-coordinate for
y= 3.2 in the graph y= x(x+ 2) (x– 2)
View Window: (B)
!5(G-Solv)6(g)
1(Y-CAL)
Specify a graph.
cw
• At this time, the unit waits for input of an x-
coordinate value.
Input the x-coordinate value.
a.f
Determine the corresponding y-coordinate value.
w
!5(G-Solv)6(g)
123456
123456
Analyzing a Function Graph 9 - 2
170
Specify a graph.
2(X-CAL) cw
• At this time, the unit waits for input of a y-coor-
dinate value.
Input the y-coordinate value.
d.c
Determine the corresponding x-coordinate value.
w
• If there is more than one x-coordinate value for a given y-coordinate value or
more than oney-coordinate value for a given x-coordinate value, use eand d
to move between them.
• The display used for the coordinate values depends on the graph type as shown
below.
• Polar Coordinate Graph
• Parametric Graph
• Inequality Graph
• Note that you can not determine a y-coordinate for a given x-coordinate with a
parametric graph.
• If there is only one graph, pressing 1(Y-CAL) / 2(X-CAL) directly displays
the x-coordinate/y-coordinate (selection of the graph is not required).
9 - 2 Analyzing a Function Graph
171
kk
kk
kDetermining the Integral for Any Range
Example
∫
–1.5
0
x(x+ 2) (x– 2) dx
View Window: (A)
!5(G-Solv)6(g)
3(∫dx)
(Graph selection standby)
Select graph.
cw
• The display is prompting input of the lower limit
of the integration range.
Move the pointer and input the lower limit.
e~ew
Input the upper limit and determine the integral.
e~ew
• The lower limit must be less than the upper limit when specifying the integration
range.
• Note that the above operation can be performed on rectangular coordinate (Y=)
graphs only.
123456
Analyzing a Function Graph 9 - 2
172
9-3 Graph Solve Precautions
• Depending on the View Window parameter settings, there may be some error in
solutions produced by Graph Solve.
• If no solution can be found for any of the above operations, the message “Not
Found” appears on the display.
• The following conditions can interfere with calculation precision and may make it
impossible to obtain a solution.
* When the solution is a point of tangency to the x-axis.
* When the solution is a point of tangency between two graphs.
Andere Handbücher für FX-9750G
22
Inhaltsverzeichnis
Andere Casio Kalkulator Handbücher
Casio
Casio fx-82EX Bedienungsanleitung
Casio
Casio SL-210TE Bedienungsanleitung
Casio
Casio fx-4200P Bedienungsanleitung
Casio
Casio fx-350TL Bedienungsanleitung
Casio
Casio fx-7400G PLUS Installations- und Betriebshandbuch
Casio
Casio FX-9860GIII Installationshandbuch
Casio
Casio FX-9750GII - SOFTWARE VERSION 2-00 Bedienungsanleitung
Casio
Casio fx-100AU PLUS Bedienungsanleitung
Casio
Casio 2296 Bedienungsanleitung
Casio
Casio fx-7000GA Bedienungsanleitung
Casio
Casio V.P.A.M. fx-992S Bedienungsanleitung
Casio
Casio fx-500ES Bedienungsanleitung
Casio
Casio DF-120BM Bedienungsanleitung
Casio
Casio fx-5800P Bedienungsanleitung
Casio
Casio fx-115ES Technisches Dokument
Casio
Casio fx-9860GII SD Installationshandbuch
Casio
Casio FX-7400GII Bedienungsanleitung
Casio
Casio fx-180Pv Bedienungsanleitung
Casio
Casio DR-270TM Bedienungsanleitung
Casio
Casio fx-100AU PLUS Bedienungsanleitung
