Casio FX-9750G Bedienungsanleitung

RecursionTableandGraph

You can input two formulas for any of the three following types of

recursion, which you can then use to generate a table and draw

graphs.

• General term of sequence {an}, made up of anand n

• Formulas for linear recursion between two terms, made up of an+1,

an, and n

• Formulas for linear recursion between three terms, made up of

an+2, an+1, an, and n

16-1 Before Using the Recursion Table and Graph Function

16-2 Inputting a Recursion Formula and Generating a Table

16-3 Editing Tables and Drawing Graphs

Chapter

250

16-1 Before Using the Recursion Table and

Graph Function

uTo enter the RECUR Mode

On the Main Menu, select the RECUR icon and enter the RECUR Mode. This causes

the Recursion Menu to appear.

• All recursion formulas that are stored in memory appear in the Recursion Menu.

1(SEL)........ Menu for control of table generation

2(DEL) ....... Recursion formula delete

3(TYPE) ..... Recursion formula type specification

4(n, an...) .... Menu for input of variable nand general terms anand bn

5(RANG) .... Screen for setting of table range

6(TABL)...... Recursion formula table generation

uTo specify the recursion formula type

Before inputting a recursion formula, you must first specify its type.

1. In the Recursion Menu, press 3(TYPE).

3(TYPE)

• In this display, “an=An+ B” is the general term (an= A ×n+ B) of {an}.

1(an) ........... General term of sequence {an}

2(an+1)......... Linear recursion between two terms

3(an+2)......... Linear recursion between three terms

2. Press the function key for the recursion formula type you want to set.

123456

Selected storage area

Press

and

to move.

123456

251

16-2 Inputting a Recursion Formula and

Generating a Table

Example 1 To input an+1 = 2an+ 1 and generate a table of values as the

value of nchange from 1 to 6

Make a1= 1.

1. Specify the recursion formula type as linear recursion between two terms and

then input the formula.

c4(n, an...)

2(an)+b

2. Press wand then press 5(RANG) to display the table range setting screen.

w5(RANG)

1(a0) ........... Value for a0(b0)

2(a1) ........... Value for a1(b1)

The table range settings specify the conditions that control the value of variablenin

the recursion formula, and the initial term of the numeric value table. You should also

specify a starting point for the pointer when drawing a convergence/divergence graph

(WEB graph) for a formula for linear recursion between two terms.

Start................ Starting value of variable n

End ................. Ending value of variable n

a0, b0............... Value of 0th term a0/b0(a1, b1.... Value of 1st term a1/b1)

anStr, bnStr ...... Pointer starting point for convergence/divergence graph (WEB

graph)

• The value of variablenincrements by 1.

3. Specify the range of the table.

2(a1)

bwgwbw

123456

P.258

252

4. Display the table of the recursion formula.At this time, a menu of table functions

appears at the bottom of the screen.

J6(TABL)

Value in currently highlighted cell

• Displayed cell values show positive integers up to six digits, and negative inte-

gers up to five digits (one digit used for negative sign). Exponential display can

use up to three significant digits.

• You can see the entire value assigned to a cell by using the cursor keys to move

the highlighting to the cell whose value you want to view.

• You can also display the sums of the terms

(Σanor Σbn) by turning on ΣDisplay.

Example 2 To input an+2 = an+1 + an(Fibonacci series) and generate a table

of values as the value of nchange from 1 to 6

Make a1= 1 and a2= 1.

1. Specify the recursion formula type as linear recursion between three terms and

then input the formula.

3(TYPE)3(an+2)

4(n, an...)

3(an+1)+2(an)

2. Press wand then press 5(RANG) to display the table range setting screen.

w5(RANG)

1(a0) ........... Value for a0(b0) and a1(b1)

2(a1) ........... Value for a1(b1) and a2(b2)

P.9

16 - 2 Inputting a Recursion Formula and Generating a Table

123456

Currently selected cell (up to six digits)

123456

253

The table range settings specify the conditions that control the value of variable nin

the recursion formula, and the initial term of the numeric value table.

Start................ Starting value of variable n

End ................. Ending value of variable n

a0, a1, a2.......... Values of 0th term a0/b0, 1st term a1/b1, and 2nd term a2/b2.

• The value of variablenincrements by 1.

3. Specify the range of the table.

2(a1)

bwgwbwbw

4. Display the table of the recursion formula.At this time, a menu of table functions

appears at the bottom of the screen.

J6(TABL)

• There can be only one recursion table stored in memory at one time.

• Except for linear expression n, any of the following can be input for general

term {an} to generate a table: exponential expressions (such as an= 2n– 1),

fractional expressions (such as an= (n+ 1)/n), irrational expressions (such as

an= n– ), trigonometric expressions (such as an = sin 2nπ).n– 1

• Note the following points when specifying a table range.

• If a negative value is specified as a start or end value, the calculator drops

the negative sign. If a decimal value or fraction is specified, the unit uses

only the integer part of the value.

• If the value of a0/b0(or a1/b1) is greater than the start value, the calculator

makes the starting value of variable xthe same as the value of a0/b0(or a1/

b1) before generating the table.

• If the start value is greater than the end value, the calculator swaps the two

values before generating the table.

• If the start value is the same as the end value, the calculator generates a

table using the start value of variable xonly.

• If the start value is very large, it may take a long time to generate a table for

linear recursion between two terms and linear recursion between three terms.

Inputting a Recursion Formula and Generating a Table 16 - 2

Currently selected cell (up to six digits)

Value in currently highlighted cell

254

16 - 2 Inputting a Recursion Formula and Generating a Table

123456

• Changing the angle unit setting while a table generated from a trigonometric

expression is on the display does not cause the displayed values to change. To

cause the values in the table to be updated using the new setting, display the

table, press 1(FORM), change the angle unit setting, and then press 6

(TABL).

uTo specify the generation/non-generation status of a formula

Example To specify generation of a table for recursion formula an+1 = 2an+1

while there are two formulas stored

c1(SEL)

(Specifies non-generation status.)

Unhighlights this formula

6(TABL)

(Generates table.)

• To change the status of a recursion formula from non-generation to generation,

select the formula and press 1(SEL).

uTo change the contents of a recursion formula

Changing the contents of a recursion formula causes the values in the table to be

updated using the current table range settings.

Example To change an+1 = 2an+1 to an+1 = 2an–3

(Displays the cursor.)

ee-dw

(Changes the formula contents.)

6(TABL)

255

uTo delete a recursion formula

1. Display the Recursion Menu and then use fand cto highlight the formula

you want to delete.

2. Press 2(DEL).

3. Press 1(YES) to delete the formula or 6(NO) to abort the operation without

deleting anything.

Inputting a Recursion Formula and Generating a Table 16 - 2

123456

256

16-3 Editing Tables and Drawing Graphs

You get a choice of four options for editing tables and drawing graphs.

• Deletion of a recursion formula table

• Drawing of a connect type graph

• Drawing of a plot type graph

• Drawing of a graph and analysis of convergence/dievergence (WEB)

You can access these options from the function menu that appears at the bottom of

the screen whenever a table is displayed.

1(FORM).... ReturnstoRecursion Menu.

2(DEL) ....... Table delete

4(WEB) ...... Draws convergence/divergence graph (WEB graph).

5(G•CON) .. Draws connected type recursion graph.

6(G•PLT) .... Draws plot type recursion graph.

• The WEB item (4) is available only when a table generated using a formula for

linear recursion between two terms (an+1 =, bn+1 =) is on the display.

uTo delete a recursion table

1. Display the recursion table you want to delete and then press 2(DEL).

2. Press 1(YES) to delete the table or 6(NO) to abort the operation without

deleting anything.

123456

P.259

P.146

123456

257

Editing Tables and Drawing Graphs 16 - 3

kBefore Drawing a Graph for a Recursion Formula

You must first specify the following.

• Draw/non-draw status of for the recursion formula

• The type of data to be plotted

To specify the draw/non-draw status, display the Recursion Menu and then press

1(SEL).

uTo specify the draw/non-draw status of a formula

There are two options for the draw/non-draw status of a recursion formula graph.

• Draw the graph for the selected recursion formula only

• Overly the graphs for both recursion formulas

To specify the draw/non-draw status, use same procedure as that for specifying

generation/non-generation status.

uTo specify the type of data to be plotted (ΣDisplay: On)

You can specify one of two types of data for plotting.

•anon the vertical axis, non the horizontal axis

•Σanon the vertical axis, non the horizontal axis

In the function menu that appears while a table is on the display, press 5(G•CON)

or 6(G•PLT) to display the Plot Data Menu.

1(an) ........... anon the vertical axis, non the horizontal axis

6(Σan) ......... Σanon the vertical axis, non the horizontal axis

Example 1 Draw a graph of an+1 = 2an+ 1 with anon the vertical axis and n

on the horizontal axis, and with the points connected.

Set the following parameters in the View Window.

Xmin = 0 Ymin = 0

Xmax = 6 Ymax = 65

Xscale = 1 Yscale = 5

6(TABL)5(G•CON)

(Selects connected type.) 123456

P.254

123456

258

1(an)

(Draws graph with anon the vertical

axis.)

Example 2 Draw a graph of an+1 = 2an+ 1 with Σanon the vertical axis and n

on the horizontal axis, and with the points unconnected.

Use the same View Window parameters as those provided in Exam-

ple 1.

6(TABL)6(G•PLT)

(Selects plot type.)

6(Σan)

(Draws graph with Σanon the vertical

axis.)

• To input a different recursion formula after a graph is drawn, press !Q. This

displays the Recursion Menu where you can input a new formula.

kDrawing a Convergence/Divergence Graph (WEB graph)

With this feature, you can draw a graph of an+1 = f

(an) where an+1 and anare the terms

of linear recursion between two terms, substituted respectively for yand xin the

function y= f

(x). The resulting graph can then be viewed to determine whether or not

the graph is convergent or divergent.

Example 1 To determine whether or not the recursion formula an+1 = –3an2+

3anis convergent or divergent.

Use the following table range.

Start = 0 End = 6

a0= 0.01 anStr = 0.01

b0= 0.11 bnStr = 0.11

Use the following View Window parameters.

Xmin = 0 Ymin = 0

Xmax = 1 Ymax = 1

Xscale = 1 Yscale = 1

16 - 3 Editing Tables and Drawing Graphs

123456

Andere Handbücher für FX-9750G

Inhaltsverzeichnis

Andere Casio Kalkulator Handbücher

Casio

Casio fx-82AU PLUS Bedienungsanleitung

Casio

Casio CFX-9850G PLUS Bedienungsanleitung

Casio

Casio DC-810 Bedienungsanleitung

Casio

Casio FX-9860G SD Bedienungsanleitung

Casio

Casio Biolator H-801 Bedienungsanleitung

Casio

Casio CFX-9970G Bedienungsanleitung

Casio

Casio DC-150A Bedienungsanleitung

Casio

Casio Financial Consultant FC-100V Bedienungsanleitung

Casio

Casio MS-100FM Bedienungsanleitung

Casio

Casio ALGEBRA FX 2.0 Bedienungsanleitung

Casio

Casio CLASSPad300 - ClassPad 300 Touch-Screen Graphing Scientific... Betriebsanleitung

Casio

Casio FX-9750G Fehlerbehebungshandbuch

Casio

Casio fx-CG50 Bedienungsanleitung

Casio

Casio ALGEBRA FX 2.0 Bedienungsanleitung

Casio

Casio FX-9750G Bedienungsanleitung

Casio

Casio FX-100D Bedienungsanleitung

Casio

Casio HR-8TE Bedienungsanleitung

Casio

Casio CFX-9970G Bedienungsanleitung

Casio

Casio FX-602P Bedienungsanleitung

Casio

Casio CFX-9970G Bedienungsanleitung

Casio

Casio fx-570A Montageanleitung

Casio

Casio FH-150 Bedienungsanleitung

Casio

Casio CFX-9970G Bedienungsanleitung

Casio

Casio FX-603P Bedienungsanleitung

Beliebte Kalkulator Handbücher anderer Marken

HP 35s Handbuch

LEXIBOOK

LEXIBOOK EL350 Bedienungsanleitung

HP HP-97 Bedienungsanleitung

Citizen

Citizen SDC-414N Bedienungsanleitung

Canon

Canon P26-DHIII Bedienungsanleitung

Citizen

Citizen 520DPA Bedienungsanleitung

Sharp

Sharp EL-9900 Bedienungsanleitung

Sharp

Sharp WriteView EL-W506 Technisches Handbuch

HP HP-67 Benutzerhandbuch

Royal

Royal CBC2000 Bedienungsanleitung

Heathkit

Heathkit IC-2009 Bedienungsanleitung

Universal

Universal UNV-15907 Bedienungsanleitung

Sharp

Sharp EL-9650 Bedienungsanleitung

Sharp

Sharp EL2192RII - Printing Calculator Bedienungsanleitung

Ativa

Ativa AT-30i Bedienungsanleitung

HP StreamSmart 400 Bedienungsanleitung

HP 20b Business Consultant Bedienungsanleitung

HP 9g Bedienungsanleitung