CDA FWC861 Kurzanleitung

www.cda.eu

FWC861

Wine Cooler

Installation, use and maintenance

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that CDA reserve the right to invalidate the guarantee supplied with

this product following incorrect installation or misuse of the appliance

or use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualiﬁed personnel.

Do not use the appliance if the plug, the mains cord or the appliance

itself is damaged. If the mains cord is damaged, you must have it

replaced by the manufacturer, or an authorised service centre or

similarly qualiﬁed persons in order to avoid a hazard.

Children should be supervised to ensure that they do not play with

the appliance. Keep the mains cord out of the reach of children.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

EU Declarations of Conformity:

This appliance has been designed, constructed and marketed in

compliance with safety requirements of EU Directive 2014/35/EU (Low

voltage) and requirements of Directive 2014/30/EU (EMC).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU.

Please render the appliance unusable before disposal. This includes

removing the plug and breaking the door ﬁxings to prevent children

being trapped inside the appliance during play, or any other risk of

injury.

At the end of its working life, the product must not be disposed of as

urban waste. It must be taken to a special local authority dierentiated

waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health deriving from

inappropriate disposal and enables the constituent materials to be

recovered to obtain signiﬁcant savings in energy and resources. As a

reminder of the need to dispose of household appliances separately,

the product is marked with a crossed-out wheeled dustbin.

Before ﬁrst use

You must allow the appliance to settle for at least twenty four hours

prior to switching the power on.

It is recommended that you remove all internal and external packaging

and clean the interior of the appliance prior to ﬁrst use, using a solution

of bicarbonate of soda and warm water and then thoroughly dry the

interior.

The appliance may have an odour to it at ﬁrst use. This will disappear as

the appliance cools.

Please note:

• The appliance will work continuously until it gets to the correct

temperature.

• If the appliance is switched o, you should allow ﬁve minutes before

switching it on again to prevent the risk of unnecessary damage to

the compressor.

•The LED display may not show the selected temperature whilst the

appliance ﬁrst gets to the correct temperature. This is normal, and the

display will be corrected automatically once the appliance has run for

a few hours.

Use

• Only store wine in sealed containers.

• Do not overload the cabinet.

• Only open the door when necessary.

• Do not cover the shelves with aluminium foil or anything else that will

prevent air from circulating around the cabinet.

• To prevent damage to the door seal, ensure the door is fully open

before removing the shelves.

• This is a self-defrosting appliance. The compressor will not run during

the thirty minute defrost cycle.

•Do not pull the shelves beyond the anti-stop position (approximately

one third out) when fully loaded.

•This appliance is intended to be used exclusively for the storage of

wine.

•In the event of a power failure, leave the door closed as much

as possible to maintain the internal working temperature. Should

the power failure continue for a prolonged period, you should

take steps to protect the contents of the wine cooler against a

rise in temperature. The wine cooler will remember the selected

temperature settings and revert to these settings once the power is

restored.

This appliance is suitable for use in an extended temperature climate

(ST) and has a normal operating ambient temperature of 16-38°C.

Use of the appliance below 10°C may cause performance issues that

are not indicative of a fault. Normal operation will resume once the

appliance is within the speciﬁed range.

Please note: A bottle loading plan is on page 22.

Use and controls

To switch the power on/o

• Press and hold the power button for one second to switch the wine

cooler on.

• Press and hold the power button for ﬁve seconds to switch the wine

cooler o.

To change the temperature

• Touch the "+" or "-" buttons for the appropriate zone until the required

temperature is shown on the display.

• The preset temperature is 8°C/46°F for the upper zone and 12°C/54°F

for the lower zone.

• To change the temperature display from Fahrenheit to Celsius, or

Celsius to Fahrenheit, touch and hold the light button for ﬁve seconds.

• To view the set temperature, touch the appropriate "+" or "-" button at

any time and the set temperature will ﬂash in the LED display for ﬁve

seconds.

• The display shows the current internal temperatures when the wine

cooler is on.

Key:

1 – Power button

2 – Upper zone "+" button

3 – Upper zone "-" button

4 – Lower zone "+" button

5 – Lower zone "-" button

6 – Light button

341 2

Fig. 1

5 6

Please note: The temperature in the lower zone must be set either the

same or higher than the temperature in the upper zone. For optimal

performance, the temperatures in the two zones should dier by at

least 4˚ C.

Optimal temperature selection

Whilst wine is best stored at temperatures between 13 and 15˚C, your

wine can also be stored at drinking temperature, for red wine this is

between 15 and 17˚C, and for white wine between 12 and 13˚C.

To use the internal light

• Touch the light button to switch the light on or o.

Humidity Control

The wine cooler is equipped with a

humidity control system to maintain optimal

humidity within the wine cooler.

• Fill the humidity reservoir (ﬁg. 2)

approximately 3/4 full with water.

• Place the reservoir over the special lugs toward the back of the

bottom shelf in the upper section of the wine cooler, as shown in ﬁg. 2.

Ensure it is located correctly to prevent water spillage.

• Check the water level regularly and reﬁll if required.

Fig. 2

Temperature display

The temperature display will show the current internal temperature.

The display ﬂashes:

• When a dierent temperature is being set

• If the internal temperature is +/- 5˚ away from the set temperature.

This serves as a warning to prevent damage to the contents of the

appliance should the temperature be too high.

Sabbath mode

Sabbath mode is available for the observance of certain religious

holidays. This will switch o the displays, interior light and audible

alarms. The cooling process will continue.

To switch the Sabbath mode on, touch and hold the power and light

keys simultaneously for ﬁve seconds. The indicator light will ﬂash four

times and conﬁrm the Sabbath mode is on. Sabbath mode will switch

o automatically after 96 hours, but to switch the Sabbath mode o at

any time, touch and hold the power and light keys simultaneously for

ﬁve seconds.

Dynamic Cooling and Silent modes

The appliance has two dierent running modes.

Silent mode

Once the required temperature is reached, the appliance will run without

the fan. The wine cooler is factory set to silent mode.

To change to dynamic cooling mode, touch and hold the "-" button for

approximately ﬁve seconds. The wine cooler will beep ﬁve times to

conﬁrm dynamic cooling is on.

Dynamic cooling mode

The fans cycle on and o to circulate the air even after the required

temperature is reached. This ensures consistent humidity and

temperature distribution in the wine cooler, creating perfect conditions

for long term storage.

Using the dynamic mode increases the level of noise in operation.

To change to silent mode, touch and hold the "+" button for

approximately ﬁve seconds. The wine cooler will beep three times to

conﬁrm silent mode is on.

Removing the shelves

To remove a shelf from the wine

cooler, ﬁrst remove all bottles

from the shelf, then pull the shelf

forwards until the groove on either

side of the shelf is level with the

plastic peg on either side of the

cabinet (as shown in ﬁg. 3). Then lift the shelf up and pull forwards.

To replace the shelves, follow the steps above in reverse order.

Temperature alarm

If the temperature rises or falls outside the set temperature range, an

alarm will sound and the display will ﬂash. This could be because:

• The wine cooler has not yet reached the set temperature (when ﬁrst

switched on)

• There has been a power failure

• The wine cooler has been overloaded

• The door is not closed properly

Fig. 3

Inhaltsverzeichnis

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung