CDA FWV601 Montage- und Bedienungsanleitung

www.cda.eu

FWV452, FWV601

& FWV902

Wine Coolers

Installation, use and maintenance

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note that

CDA reserve the right to invalidate the guarantee supplied with this

product following incorrect installation or misuse of the appliance or

use in a commercial environment.

This appliance is not designed to be used by people

(including children) with reduced physical, sensorial or

mental capacity, or who lack experience or knowledge

about it, unless they have had supervision or instructions on

how to use the appliance by someone who is responsible

for their safety.

Under no circumstances should any external covers be

removed for servicing or maintenance except by suitably

qualiﬁed personnel.

Do not use the appliance if the plug, the mains cord or the

appliance itself is damaged. If the mains cord is damaged,

you must have it replaced by the manufacturer, or an

authorised service centre or similarly qualiﬁed persons in

order to avoid a hazard.

Children should be supervised to ensure that they do not

play with the appliance. Keep the mains cord out of the

reach of children. Do not let the mains cord hang over the

edge of the table or worktop on which the appliance stands.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

EU Declarations of Conformity:

This appliance has been designed, constructed and marketed in

compliance with safety requirements of EU Directive 2014/35/EU (Low

voltage) and requirements of EU Directive 2014/30/EU (EMC).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.

Please render the appliance unusable before disposal. This includes

removing the plug and breaking the door ﬁxings to prevent children

being trapped inside the appliance during play, or any other risk of

injury.

At the end of its working life, the product must not be disposed of as

urban waste. It must be taken to a special local authority dierentiated

waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health deriving from

inappropriate disposal and enables the constituent materials to be

recovered to obtain signiﬁcant savings in energy and resources. As a

reminder of the need to dispose of household appliances separately,

the product is marked with a crossed-out wheeled dustbin.

Before ﬁrst use

You must allow the appliance to settle for at least twenty four

hours prior to switching the power on.

It is recommended that you remove all internal and external

packaging and clean the interior of the appliance prior to ﬁrst use,

using a solution of bicarbonate of soda and warm water and then

thoroughly dry the interior.

The appliance may have an odour to it at ﬁrst use. This will disappear

as the appliance cools.

Please note:

• The appliance will work continuously until it gets to the correct

temperature.

• If the appliance is switched o, you should allow ﬁve minutes before

switching it on again to prevent the risk of unnecessary damage to

the compressor.

•The LED display may not show the selected temperature whilst the

appliance ﬁrst gets to the correct temperature. This is normal, and

the display will be corrected automatically once the appliance has

run for a few hours.

Use

• Only store wine in sealed containers.

• Do not overload the cabinet.

• Only open the door when necessary.

• Do not cover the shelves with aluminium foil or anything else that

will prevent air from circulating around the cabinet.

• To prevent damage to the door seal, ensure the door is fully open

before removing the shelves.

• This is a self-defrosting appliance. The compressor will not run

during the thirty minute defrost cycle.

•Do not pull the shelves beyond the anti-stop position (approximately

one third out) when fully loaded.

•This appliance is intended to be used exclusively for the storage of

wine.

•In the event of a power failure, leave the door closed as much as

possible to maintain the internal working temperature. Should

the power failure continue for a prolonged period, you should

take steps to protect the contents of the wine cooler against a

rise in temperature. The wine cooler will remember the selected

temperature settings and revert to these settings once the power is

restored.

This appliance is suitable for use in an extended temperature climate

(ST) and has a normal operating ambient temperature of 16-38°C.

Use of the appliance below 10°C may cause performance issues that

are not indicative of a fault. Normal operation will resume once the

appliance is within the speciﬁed range.

Use and controls

FWV452 & FWV601

To switch the power on/o

• Press and hold the power button for one second to switch the wine

cooler on.

• Press and hold the power button for ﬁve seconds to switch the wine

cooler o.

To change the temperature

• Press the up or down buttons until the required temperature is

shown on the display.

• The preset temperature is 12˚C / 54˚F.

• To change the temperature display from Fahrenheit to Celsius,

or Celsius to Fahrenheit, press and hold the light button for ﬁve

seconds.

• To view the set temperature, touch the up or down button at any

time and the set temperature will ﬂash in the LED display for ﬁve

seconds.

Key:

1 – Power button

2 – Light button

3 – Up button

4 – Down button

Fig. 1

1 2

• The display shows the current internal temperature when the wine

cooler is on.

Optimal temperature selection

Whilst wine is best stored at temperatures between 13°C and 15˚C,

your wine can also be stored at drinking temperature. For red wine

this is between 15°C and 17˚C, and for white wine between 12°C and

13˚C.

To use the internal light

• Press the light button to switch the light on or o.

Use and controls

FWV902

To switch the power on/o

• Press and hold the power button for one second to switch the wine

cooler on.

• Press and hold the power button for ﬁve seconds to switch the wine

cooler o.

To change the temperature

• Press the up or down buttons for the appropriate zone until the

required temperature is shown on the display.

• The preset temperature is 8°C / 46°F for upper zone and 12°C / 54°F

for lower zone.

• To change the temperature display from Fahrenheit to Celsius,

or Celsius to Fahrenheit, press and hold the light button for ﬁve

seconds.

• To view the set temperature, touch the up or down button at any

time and the set temperature will ﬂash in the LED display for ﬁve

seconds.

Key:

1 – Power button

2 – Upper Zone, up button

3 – Upper Zone, down

button

4 – Lower Zone, up button

5 – Lower Zone, down

button

6 – Light button

7 – Upper Zone

8 – Lower Zone

1 2

Fig. 2

7 8

• The display shows the current internal temperatures when the wine

cooler is on.

Optimal temperature selection

Whilst wine is best stored at temperatures between 13°C and 15˚C,

your wine can also be stored at drinking temperature, for red wine this

is between 15°C and 17˚C, and for white wine between 12°C and 13˚C.

To use the internal light

• Press the light button to switch the light on or o.

Please note:

The temperature in the lower zone must be set either the same

as or higher than the temperature in the upper zone. For optimal

performance, the temperatures in the two zones should dier by at

least 4˚C.

Use

Internal Humidity

The wine coolers are equipped

with a humidity system to maintain

optimal humidity within the wine

cooler.

Fill the humidity reservoir

approximately 3/4 full with water.

Place the reservoir on the runners on the top shelf as shown in ﬁg. 3.

Ensure it is located correctly to prevent water spillage.

Check the water level regularly and reﬁll if required.

Temperature display

The temperature display will show the current internal temperature.

The display ﬂashes:

• When a dierent temperature is being set

• If the internal temperature is +/- 5˚ away from the set temperature.

This serves as a warning to prevent damage to the contents of the

appliance should the temperature be too high.

Dynamic Cooling and Silent modes

The appliance has two dierent running modes.

• Silent mode

Once the required temperature is reached, the appliance will run without

the fan. The wine cooler is factory set to silent mode.

Fig. 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung