Celestron VistaPix 10x25 Bedienungsanleitung

Contents

1.Introduction .......................................................P.1

2.Notice to User ....................................................P.2

3.Product Part Identification...................................P.3

4.Digital Camera Modes.........................................P.4

5.How to usethe Binocular......................................P.5

6.Using the Camera.................................................P.6

7.System Requirements...........................................P.8

8.Basic Maintenance.............................................. P.9

9.Driver Software andImage

downloading procedure................................P.10~P.14

10. Steps to View Images on TV ................................P. 15~P.19

Steps toview TVimages

Enter "PLAYBACK MENU" screen ,press the TV scroll button (13)

to select the "FORMAT" function and press

the Shutter/Set button (5)

to confirm. A warning message will be displayed. Press the TV scroll button

(up or down) to select "YES" or "NO" to cancel.

TOTAL SIZE: 15979K

USED SIZE: 5979K

FREE SIZE: 10000K

!WARNING!

YES

DATE SETTING

YEAR MONTH DAY

2002 / 11/ 11

INFORMATION

6. [FORMAT]

Enter "PLAYBACK MENU" screen ,press the TV scroll button

(up or down) to select the "DATE" function and press the Shutter/Set button

to confirm. Use the TV scroll button to set the year then press the

Mode/Power button to set the month and day. Press the Shutter/Set

button to confirm.

NOTICE:When you execute the FORMAT function, all pictures

will be deleted (includung the locked pictures).

Enter "PLAYBACK MENU" screen ,then press the TV scroll button

(up or down) to select the "INFORMATION" function and press the Shutter/Set

button to confirm and display the memory information.

8. [INFORMATION]

7. [DATE]

P. 19

YOUWILLFORMAT

THIS STORAGE!!

CONTINUE?

P.1

1. Introduction

VistaPix is a10 x25 binocular integrated with adigital camera that

is great for sporting events, concerts and wildlife activities such as

hunting or bird-watching.

2. Install four AAA batteries into the battery compartment as shown below.

3. Close the battery compartment lid and slide the lid downward until it "clicks" shut.

A fully functioning binocular.

View images on your computer screen or on your TV.

Save single images as a JPG file for easy viewing and e-mailing.

With included Photo Manager software, you can transfer images

onto your computer for viewing, editing and printing.

Capture images at the same magnification as seen through binocular.

An LCD screen that displays the mode and number of photographs taken.

Automatic White Balance for color correction in different lighting conditions.

Automatic ( 90 seconds ) shut off mode to extend the battery life.

Main Features:

P.18

Steps toview TVimages

Enter "PLAYBACK MENU" screen ,press the TV scroll button (up or down)

to select the "DELETE /LOCK" function and press

Shutter/Set button

to confirm. Select one of the following three modes: CURRENT,

(deleteslast picture); ALL(deletesall pictures); UN/LOCK(to lock and unlock).

5. DELETE / LOCK Mode

[CURRENT] mode to deletelast picture.

After selecting CURRENT, press Shutter/Set

button to confirm. A warning message will be displayed.

Press TV scroll button (up or down)to select "YES"

to delete or "NO"to cancel.

!WARNING!

YOUWILLDELETE

CURRENTIMAGES

TO CONTINUE

YES

[ALL]mode to deleteall pictures.

After selecting ALL, press Shutter/Set

button to confirm. A warning message will be displayed.

Press TV scroll button (up or down) to select "YES"

to delete or "NO" to cancel.

!WARNING!

YOUWILLDELETE

ALL IMAGES!!

TO CONTINUE

YES

[UN / LOCK] mode.

Selectthe picture whichyou want tolock.From the "PLAYBACK MENU "

choose [UN / LOCK] function and press Shutter/Set button to confirm.

A"Thumbtack" symbol is displayed on the screen and the

image is lockedand cannot bedeleted. Repeat this procedure to unlock

the picture.

Battery installation

1. From underneath the binocular, slide the battery compartment lid upwards to open.

P.2

Looking at or near the Sun may cause instant and irreversible damage

to your eye. Eye damage is often painless, so there is no warning to

the observer that damage has occurred until it is too late. Do not

point the binocular at or near the Sun.

Children should always have adult supervision while observing.

WARNING !

Never use aVistaPix tolook atthe sun !

2.Notice to User

2-1. When no action is performed on this product, the VistaPix will

automatically turn off after 90 seconds.

2-2. The VistaPix has a battery level display in the right lower corner

of the LCD. When the battery is low you will hear a long "beep".

If no action is taken,VistaPix will automatically turn-off after 10 seconds.

2-3. Please use alkaline battery for this product.

2-4. When batteries are removed, memory of images will be maintained for 30

seconds. Batteries must be replaced within 30 seconds to avoid losing

pictures. Be sure VistaPix is OFF before replacing the batteries.

P.17

Steps toview TVimages

Enter "PLAYBACK MENU" screen ,then press TV Scroll Button (13)

(up or down) to select the "IMAGE DISPLAY" function. Press the Shutter/Set

button (5) to confirm. Choose from either "SINGLE" or "3 X3":

3. IMAGE DISPLAYmode

[SINGLE]image view mode -Single picture displayed on screen, press TV scroll

button (up ordown) to selectpictures.

[3 X 3]image view mode - 9 pictures displayedon screen at same time, press

TVscroll button (up ordown) to select pictures.

From the "PLAYBACK MENU" screen, press theTV scroll button (up or down)

to select "SLIDE SHOW", and press the Shutter/Set button to confirm.

Select either [2 S], [3 S] or [4 S]:

4. SLIDE SHOW mode

[2S]Auto-run per 2 secondsmode-will displayimages every 2 seconds.

Thereis an arrow signon the top rightcorner to indicate this mode.

Press Shutter/Set button to stopthis function.

[3S]Auto-run per 3 seconds mode- will display images every 3 seconds.

There is an arrow sign on the top right corner to indicate this mode.

Press Shutter/Set button to stop this function..

[4S]Auto-run per 4 seconds mode- will display images every 4 seconds.

There is an arrow sign on the top right corner to indicate this mode.

Press Shutter/Set button to stop this function.

P.3

1.Diopter Knob(on underside)

2.Center Focus Knob

3.Objective Lens

4.Mode/Power Button [M]

5.Shutter/Set Button [S]

6.USB Port

7.TV out

Eyepiece

9.Camera Lens

10.LCD display

11.Battery Compartment Lid

12.Objective Barrel

13.TVScroll Buttons

Port

3. Productpart identification

910

P.16

Steps toview TVimages

PLAYBACK MENU

IMAGE DISPLAY

SLIDE SHOW

DELETE / LOCK

FORMAT

DATE

INFORMATION

SINGLE

3 X 3

CURRENT

ALL

UN / LOCK

Use the video cable to connect VistaPix with TV. Press the Power button

for 3 seconds to turn on VistaPix. You can take images by aiming at

atarget atleast10meters(30ft) away. Then press Mode/Power button (4)

again to enter Image view function.

1. Select NTSC/PAL mode

Under "IMAGE DISPLAY", press Shutter/Set button (5) to exit

the main function screen shown below.

2. On PLAYBACKMENU screen

P.4

4. Digital CameraModes

4-2. Explanation onmode icon.

Press the left button Mode/Power Button (4) to scroll through the Modes.

Press right button Shutter/Set Button (5) to select a mode or to take images.

4-1.

High Resolution mode

(1280x960)VistaPixwill store

up to 40 images. This mode is the

thedefault mode.

Power off mode

Self timer mode

VistaPix will take an image

after 10 seconds.

Erase Last Picture mode

Erase All Picture mode

Battery charge display

Three scales mean battery is full.

Two scales mean the battery is half

full. One scale means the battery

is running low and replacement is

necessary.

Mass Storage mode

For the connection to computer

using USB cable.

NTSC format TV output

PAL format output

Low Resolution mode

(640x480)VistaPix will store

up to 100 images.

Full display of mode icon.

2x zoom mode

Continuous picture taking mode

Press the Shutter/Set button to start

recording video. (During the

operation, the LCD displays "Act" ).

You can take up to 1 minute of video.

Press the button again to finish the

operation.

Memory full mode

When no action is performed on each chosen

mode, it will return to the photograph taking

mode automatically after 10 seconds.

P.15

1. VistaPix shown with Video cable.

2. Plug the Video cable

into the dedicatedVistaPix

TV outlet.

3. Connect the Video cable

to the AV terminal ofthe TV

(video side).

4. Press powerbutton.

The screen willjump to

the browsing screen.

5. Press TV scroll buttons(13)

to view stored images.

Steps toview images on a TV

Power Button

[for UnitedStates]

[for Erurope anddabroad]

P.5

Adjustment eye-relief for eyeglass wearers

Fold down the rubber eyecups and place them against your glasses to get

the best viewing result.

Focusing the Binocular

B. Choose an object that is at least 10 meter (30 ft) away.

C. Looking with just your left eye, rotate the Center Focus Knob (2)

until the object you are viewing is in best focus.

D. Looking with just your right eye, rotate the Diopter Knob

until the object you are viewing is in best focus.

E. Viewing your object with both eyes, turn the Center Focus Knob

to bring it in best focus.

5. How touse the binocular

Adjusting the eyepieces

The distance between your eyes is called interpupillary distance.

The interpupillary distance is different from one person to another.

It is important to adjust to your interpupillary distance before using

your VistaPix:

-Hold VistaPix firmly in the normal viewing position.

-Adjust the barrels by pushing together or pulling apart until you see a

single circle field with both of your eyes.

A. Set the Diopter Knob (1) on the underside of the VistaPix to its center

Point between +and -.

Steps todownload images

1. Start "Photo Manager" program.

Select the buttons as indicated. 2. Enter " Removable Disk" to open

" Dcim " file.

5. Images download finished.

3. In " Dcim " file, open" 100scope "

data file. 4. In " 100scope " data file, choose the

pictures you want or choose all images.

How To Use the PhotoManager

Select the buttons as indicated.

"Help" will give you detailed information on

Photo Manager's many features.

P.14

P.6

6. Method of shooting photos

Use this product under good lighting conditions, avoid facing light source directly.

Remember to keep a distance of at least 10 meters (30 ft) away from the

target object when taking photo.

6-1. Photographic functions

6-1-1. Turn on Power by pressing the Mode/Power Button (4) for 3 seconds.

6-1-2. Press the Mode/Power Button (4) to select the resolution mode ("hi" or"lo").

6-1-3. Select a target to view with the binocular, and aim at the target.

6-1-4. Press the Shutter/Set Button (5) to take an image. A short beep will

sound indicating the picture has been taken.

6-1-5. The digital counter on the LCD will advance each time an image is taken.

When the camera's memory is full, the screen will display Full .

6-1-6. To erase the last image taken, use the Mode/Power Button (4) to select

Button to delete image(s).

6-1-7. To turn off, press Power button (4) and select OFF mode and

press the Set button (5) to turn off VistaPix.

6-1-8. The self timer function can be selected from the LCD by using the

Mode/Power Button (4). Press the Shutter/Set Button (5) to take an

image after 10 seconds.

8. Choose "Custom" or "Typical" form

of installation.

9.Please confirm the file location

press "Finish" for confirmation

P.13

the "erase last image" mode (trash can icon), and press the Shutter/Set

10. Begin installing software

11.Software installation finished, please

After installing VistaPix software. Please restart your computer.

Un-installing the Software

To un-install the software, simply insert the CD and re-install the program. The screen

will ask if you would like to remove the program and all of its components.

P.7

6-1-9. 2X Zoom Mode. Press the Mode/Power button (4) to display the

2X icon. Then, press the Shutter/Set button (5) once to select 2X mode.

Press the Shutter/Set button again to take an image at 2 times the normal

6-1-10. Mass Storage mode

When connected to a PC through the USB port, Windows will add

a "Removable Disk" hard drive under the "My Computer" icon.

Simply access the removable disk to retrieve,view and save images to a

2. Select "Install Photo Manager" 3.Choose the language and press

"OK" button

4.Enter installation scree 5.After confirming, please press

"Next" button

7.Enter serial number (located on the

CD cover). Press "Next" when complete.

1. Insert the CD ROM

6.After confirming, please press "Yes"

Steps to install Photo Manager

P.12

magnification level.

permanent location.

up to1 minute of continuous video, depending on the amount of images

already stored.

-Press the Shutter/Set Button (5) to begin taking video. You can take

-Use the Mode/Power Button (4) to select the Ct mode

record a video stream as an AVI file. To use Ct mode:

6-1-11. VistaPix has a continuous picture taking [Ct] mode that allows you to

-Press the Shutter/Set button again to finish the operation.

P.8

VistaPix PC with USB port

7-1. Windows 98SE / 2000 / ME / XP

-2.

7-3. 128MB SDRAM

7-4.

7-5. CD-ROM

7-6. USB port

-7. 6

7Pentium 233MHz or higher

700MB of free hard disk space

7. System requirements

Installation of driver

7-8. In the windows operating system, please use the included CD.

Place the CD into your CD-ROM disk drive. Follow the instructions

from the auto-installation screen. See page 10.

7-9. To download images from your VistaPix, please see P.14

Video(VGA) cardwith 2MB of RAM for minimum 16-bit

(High Color) display.

P.11

Steps toinstall VistaPixdriver software

5. Computer will automatically

install the driver.

6. Installation complete. Please.

press "Finish" button.

P.9

8.Basic maintenance

Operating Environment: 41 to104 F(5 to 40 C). 20%-85% relative humidity,

non-condensing

Care of your VistaPix

8-1.Never immerse VistaPix into any fluid or liquid.

Remove dust or stains with asoft clothdampenedwithwater

or neutral detergent. Keep in adryand cool dust-free

environmentwhen not in use.

8-2.Takethe batteries out when VistaPix is notto be

used over along period.

8-3. Avoid dropping the VistaPix. Do not disassemble VistaPix

8-4.Before removing the batteries, download pictures to your PC.

P.10

Steps toinstall VistaPixdriver software

1. Insert the CD included with your

VistaPix.

2. Click the mouse on "Installation

Driver" to begin installation.

3. Begin "InstallShield Wizard"

and your computer will

automatically execute the

installation of driver program.

4. Follow the "InstallShield Wizard"

steps to guide you through the

driver installation.

Click on "Next" when complete.

Andere Handbücher für VistaPix 10x25

Inhaltsverzeichnis

Andere Celestron Fernglas Handbücher

Celestron

Celestron Oceana 7x50 71189-B Bedienungsanleitung

Celestron

Celestron GRANITE Bedienungsanleitung

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Celestron

Celestron Cavalry 71420 Bedienungsanleitung

Celestron

Celestron Cometron Bedienungsanleitung

Celestron

Celestron 71237 Bedienungsanleitung

Celestron

Celestron LandScout Bedienungsanleitung

Celestron

Celestron Oceana 71189-B Bedienungsanleitung

Celestron

Celestron POPULAR SCIENCE Bedienungsanleitung

Celestron

Celestron SkyMaster 15x70 Bedienungsanleitung

Celestron

Celestron VistaPix 8x22 Betriebsanleitung

Celestron

Celestron SkyMaster 25x70 Kurzanleitung

Celestron

Celestron Outland X Bedienungsanleitung

Celestron

Celestron POPULAR SCIENCE SKYMASTER 71023 Bedienungsanleitung

Celestron

Celestron VistaPix 8x30 Bedienungsanleitung

Celestron

Celestron 72033 Bedienungsanleitung

Celestron

Celestron Ultima DX10x50 Bedienungsanleitung

Celestron

Celestron Skymaster pro Bedienungsanleitung

Celestron

Celestron Noble 10x50 Bedienungsanleitung

Celestron

Celestron StarSense 94008 Bedienungsanleitung

Celestron

Celestron Popular Science OUTLAND X 72349 Bedienungsanleitung

Celestron

Celestron Nautica 7x50CF Bedienungsanleitung

Celestron

Celestron TrailSeeker Bedienungsanleitung

Celestron

Celestron LANDSCOUT ROOF Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung

APM

APM ED Apo Series Bedienungsanleitung

Pulsar

Pulsar ACCOLADE 2 LRF Bedienungsanleitung