CELOT CTR-180 Bedienungsanleitung
1
CTR-180 M2M Router Manual
CELOT WIRELESS
CTR-180 User Manual
V1.3
SEP 2012
2
CTR-180 M2M Router Manual
CELOT WIRELESS
Contents
1. Introduction
1.1 Feature
1.2 Package Contents
2. Name of each section and features description
2.1 Name of each section
2.2 LED Display
2.3 Getting Started.
3. Using Configuration Menu
Connecting CTR-180 to PC
3. 1 OverView
3. 2 Internet
3.2.1 Internet > WAN
3.2.2 Internet > LAN
3.2.3 Internet > DHCP Clients
3.2.4 Internet > Advanced Routing.
3.3 Wireless Setting
3.3.1 Wireless > Basic
3.3.2 Wireless > Advanced
3.3.3 Wireless > Security
3.3.4 Wireless > AP Client
3.3.5 Wireless > WPS
3.3.6 Wireless> Station List
3.3.7 Wireless> Statistics
3. 4 Firewall
3.4.1 Firewall > MAC/IP/Port Filtering Settings
3.4.2 Firewall > Port Forwarding Settings
3.4.3 Firewall > DMZ
3.4.4 Firewall > System Security
3.4.5 Firewall > Contents Filtering
3.5. Administration
3.5.1 Administration>Status
3.5.2 Administration>Statics
3.5.3 Administration>Management
3.5.4 Administration>Upload Firmware
3.5.5 Administration>Settings Management
3.5.6 Administration> Reboot Settings
3.5.7 Administration>System log
3.6.1 Service> Direct Serial
3.5.8 Service> Serial Test
3
CTR-180 M2M Router Manual
CELOT WIRELESS
1. Introduction
This manual is for users who use CTR-100 as 3G Wi-Fi Router.
For the pursoe of 3G M2M appliction, please contact to Celot Wireless.
1.1 Feature
CTR-180 provides functions as follows;
●CTR-180 enables you to access to the internet by using wireless network
(CDMA REV.A network).
●CTR-180 supports multi-interfaces including USB, Full UART (RS232C/RS485),
Lite-UART, I2C and RJ.
●CTR-180 supports direct serial works as if a serial device is directly connected
to a remote server by server mode or client mode.
●DATA back-up during the operation of direct serial.
●3G wireless network always connection mode or on demand mode.
●Auto-reset based on pre-defined schedule.
●DDNS manual setting
●USB host
●CTR-180 displays the status of the operation with 4 LEDs.
●IEEE802.11b/g/n support : up to150Mbps built-in wireless AP.
●Browser-based configuration and easy set-up wizard.
●NAT, VPN Pass-Through function.
●Industry-leading firewall security.
●Automatic receipt of IP address with DHCP server.
●CTR-110W can be powered by back-up battery
●SMA Antenna Connector.
●GPS Module can be connected trough Lite-UART
4
CTR-180 M2M Router Manual
CELOT WIRELESS
1.2 Package Contents
CTR-180
5V DC Power Adaptor
CDMA Antenna
Battery Pack (optional)
GPS Module (optional)
※Note
Pictures in User Manual might be different from the actual product you purchased.
Furthermore, some of the components might be changed for better performance
without any prior notice.
5
CTR-180 M2M Router Manual
CELOT WIRELESS
2. Name of each section and features description
2.1 Name of each section
■Front View
■Rear View
6
CTR-180 M2M Router Manual
CELOT WIRELESS
※External Interface
2.2 LED Display
No. Assi
g
nmen
t
Colo
r
Status
Remarks
LED1 3G RSSI Various ON Yellow Green ->
Orange -> Red
(
from Stron
g
to week si
g
nal
)
LED2 3G RED ON When the device is connected to 3G
network.
LED3 WLAN RED ON When WLAN is activated.
LED4 POWER RED ON When the device is power on.
2.3 Getting Started.
1). Open Rear Cover and Insert SIM Card
2). Insert Battery and Close the Rear Cover
3). Connect Power adaptor to the device.
4). Switch ON to turn on the device.
5). All LEDs shall be ON when the device is ready for service.
6). When WLAN LED and 3G LED are on, you can access the device for internet
connection through LAN Port or WIFI.
7
CTR-180 M2M Router Manual
CELOT WIRELESS
3. Using Configuration Menu
Connecting CTR-180 to PC
1). Connect CTR-180 to PC through LAN cable or WIFI
2). For WIFI connection, the default Network ID (SSID) from the factory is CTR-180
3). To access to Web UI page, Input http://10.10.10.254 in the address window
as shown below and press Enter Key
4). User Name and Passwords are required to access adimin web page.
Plesae input “ admin” for User Name and “admin” for Password when you
acess the Web UI first time.
5). After press ENTER key, System Status will be displayed as shown in the
overview below
8
CTR-180 M2M Router Manual
CELOT WIRELESS
3. 1 OverView
Basic network information can be displayed.
● Select Language: Supported languages can be selected.
3. 2 Internet
3.2.1 Internet > WAN
9
CTR-180 M2M Router Manual
CELOT WIRELESS
WAN connection mode for CTR-180 is “3G/LTE” as default but other types of WANs
can be selected as follow,
1) STATIC (Fixed)
2) DHCP (Auto Config)
3) PPPoE(ASDL)
4) L2TP
5) 3G/LTE Mode
●Provided User ID, Password, Dial Number and APN should be input.
6) CDMA
※Note
You must input correct user ID, Password, and Dial Number from the wireless
network provider (ex. Skylink etc) otherwise, the device is not able to access
the wireless network.
(ex.) User Name: Mobile
Password: internet
Dial Up Number: #777
●Operation Mode [Keep Alive / On Demand]
You can select to keep CTR-110W connected to the network or just it
connected on demand only. In case of “Keep Alive” mode, CTR-110W will
not get into sleep mode and it will keep being always connected to the
network.
3.2.2 Internet > LAN
10
CTR-180 M2M Router Manual
CELOT WIRELESS
This page is to configure the parameters for local area network which connects to
the LAN port of your Access Point. Here you may change the setting for IP address,
subnet mask, DHCP, etc..
●IP Address: The basic IP address for CTR-100 is “10.10.10.254”. IP address
for CTR-180 can be changeable on this menu.
●Subnet Mask : You can change Subnet Mask
●Default Gateway : You can change Default Gateway.
●DHCP
-Enable: IP address can be automatically allocated to Client PC.
-Disable: IP address should be manually input to Client PC.
●DHCP Client Range:
The range of IP address can be defined when IP address is automatically
allocated to Client PC.
In case of clicking Show Client icon, all of client PC can be displayed.
-Statically Assigned (Static DHCP):
Inhaltsverzeichnis
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise