Central Machinery 03135 Bedienungsanleitung

Compound Sliding Table

ASSEMBLY and OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

For technical questions and replacement parts, please call 1-800-444-3353

Model 03135

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools .

4” x 4”

Brought To You By Augusta Flint

Page 2

SKU 03135

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,

operating and maintenance procedures, parts list and diagram. Keep your invoice with this

manual. Write the invoice number on the inside of the front cover. Keep the manual and

invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet

locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically

powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let

them handle machines, tools, or extension cords.

4. Store idle equipment. When not in use, tools must be stored in a dry location to

inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment to

do the work of a larger industrial tool. There are certain applications for which this

tool was designed. It will do the job better and more safely at the rate for which it was

intended. Do not modify this tool and do not use this tool for a purpose for which it

was not intended .

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in

moving parts. Protective, electrically non-conductive clothes and non-skid footwear

are recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.

Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI

approved dust mask or respirator when working around metal, wood, and chemical

dusts and mists.

Overall Dimensions 12-3/4”L x 10-1/2”W x 4-5/8”H

Base Dimensions 4-9/16” x 5-3/16”

Table Dials 1-3/4” Diameter

Table Swivels 360 Degrees

Table Scales .001”

Travel 2-1/2” X/Y Travel

Brought To You By Augusta Flint

Page 3

SKU 03135

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over

or across running machines.

9. Maintain tools with care. Keep tools sharp and clean for better and safer

performance. Follow instructions for lubricating and changing accessories.

10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool

when you are tired.

11. Check for damaged parts. Before using any tool, any part that appears damaged

should be carefully checked to determine that it will operate properly and perform its

intended function. Check for alignment and binding of moving parts; any broken parts

or mounting fixtures; and any other condition that may affect proper operation. Any

part that is damaged should be properly repaired or replaced by a qualified

technician.

12. Guard against electric shock. Prevent body contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerator enclosures.

13. Replacement parts and accessories. When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use accessories

intended for use with this tool. Approved accessories are available from Harbor

Freight Tools.

14. Do not operate tool if under the influence of alcohol or drugs. Read warning

labels on prescriptions to determine if your judgment or reflexes are impaired while

taking drugs. If there is any doubt, do not operate the tool.

15. Maintenance. For your safety, maintenance should be performed regularly by a

qualified technician.

Warning: The warnings, cautions, and instructions discussed in this instruction manual

cannot cover all possible conditions and situations that may occur. It must be under-

stood by the operator that common sense and caution are factors which cannot be

built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the parts listed on page 5 are included. If any parts

are missing or broken, please call Harbor Freight Tools at the number on the cover of this

manual as soon as possible.

Brought To You By Augusta Flint

Page 4

SKU 03135

Operation

Maintenance

Note: Prior to using the Sliding Table, read the manufacturer’s manual for the milling

machines, drills, or grinders to be used with the Sliding Table. Follow all of the instructions

and safety precautions in the manufacturer’s manual.

Warning! Before use, check the Sliding Table for cracks, bends, or breaks. Check for an

improperly mounted workpiece or any other condition thay may affect safe operation. Do not

use damaged equipment.

1. Mount the Sliding Table using two bolts (not included) to a surface able to safely hold the

Sliding Table (16.6 Lbs.) and the weight of the workpiece.

2. Secure the workpiece in the T-slots according to directions specified in the milling, drilling,

or grinding manual (not included). The T-slots are .625” at the bottom of the “T”, and .375” at the

slot opening.

3. Rotate the Wheels (#10) to adjust the table to the specific size you need.

4. Lock the table into place with the two hex head cap screws on each side.

1. Periodically apply a light coat of machine oil to all of the moving parts.

2. To clean, thoroughly wipe with a mild solvent to remove excess oil and metal shavings.

Dry with a clean cloth and then re-apply machine oil.

Brought To You By Augusta Flint

Page 5

SKU 03135

NOTE: Some parts are listed and shown for illustration purposes only and are not available

individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS

MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU-

TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE

OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS

QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER

AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS

SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER

REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING

OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List

Part No. Description

1 Base Slide

2 Nastar

3 Box

4 Guide Pin

5 Slide

6 Spindle (2)

7 Table

8 Bronze Nut (2)

9 Bracket (2)

10 Wheel (2)

11 Key (2)

12 Bolt (2)

13 Washer (2)

14 Nastar

15 Nut&Bolt (2)

16 Nut&Bolt (6)

17 Bolt (4)

Note: Parts 14, 15, 16, and 17 are internal and not shown on the assembly drawing.

Brought To You By Augusta Flint

Page 6

SKU 03135

Assembly Drawing

Note: Parts 14, 15, 16, and 17 are internal and not shown on the assembly drawing.

Brought To You By Augusta Flint

Inhaltsverzeichnis

Andere Central Machinery Elektrowerkzeuge Handbücher

Central Machinery

Central Machinery 59490 Montageanleitung

Central Machinery

Central Machinery 35570 Bedienungsanleitung

Central Machinery

Central Machinery 90589 Bedienungsanleitung

Central Machinery

Central Machinery 96318 Bedienungsanleitung

Central Machinery

Central Machinery Central Machinery 13" Bench Drill Press Bedienungsanleitung

Central Machinery

Central Machinery 39955 Kurzanleitung

Central Machinery

Central Machinery 63471 Montageanleitung

Central Machinery

Central Machinery 63995 Montageanleitung

Central Machinery

Central Machinery 42927 Betriebsanleitung

Central Machinery

Central Machinery 34542 Bedienungsanleitung

Central Machinery

Central Machinery 91762 Bedienungsanleitung

Central Machinery

Central Machinery 38119 Installationshandbuch

Central Machinery

Central Machinery 39955 Montageanleitung

Central Machinery

Central Machinery 43378 Installationshandbuch

Central Machinery

Central Machinery 92066 Bedienungsanleitung

Central Machinery

Central Machinery 42289 Kurzanleitung

Central Machinery

Central Machinery 32966 Stücklistenhandbuch

Central Machinery

Central Machinery 65589 Installationshandbuch

Central Machinery

Central Machinery 44506 Installationshandbuch

Central Machinery

Central Machinery 33497 Montageanleitung

Central Machinery

Central Machinery 45656 Bedienungsanleitung

Central Machinery

Central Machinery 38144 Bedienungsanleitung

Central Machinery

Central Machinery 59766 Montageanleitung

Central Machinery

Central Machinery 43353 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch