Central Machinery 34542 Bedienungsanleitung

MANUAL TIRE CHANGER

Model 34542

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Do to continuing improvements,

actual product may differ slighlty

from the product described herein.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

REV: 10/06

Tire not included.

PRODUCT SPECIFICATIONS

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures, parts list and assembly diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES AND PRECAUTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas

invite accidents.

2. Do not operate tools and equipment in explosive atmospheres, such

as in the presence of flammable liquids, gases, or dust. Tools and

equipment can create sparks which may ignite the dust or fumes.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 2

Item Description

Product Applications Will handle all tires from 8” to light trucks

such as 7.5” x 16” and flotation tires up

to sizes 12.5”L x 16”.

Base Dimensions 15” x 18”

Base Mounting Holes 7/16” Diameter (Qty. 4)

Mounting/Dismounting Bar

Dimensions

37” Long x 1-15/16” Diameter

Wheel Rest Plate Dimensions 7-1/2” Diameter x 3/16” Thick

Leg Dimensions 1-1/2” x 3” x .15 (Wall Channel)

Main Column Dimensions 2-7/8” Diameter

Construction All Steel

Additional Features No Air or Electrical Connections Required.

Designed to Protect Tube From Damage.

Approximate Weight 42 Pounds

PERSONAL SAFETY

1. Stay alert. Watch what you are doing, and use common sense when oper-

ating tools and equipment. Do not use a tool or equipment while tired or

under the influence of drugs, alcohol, or medication. A moment of inatten-

tion while operating tools and equipment may result in serious personal injury.

2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in moving parts.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 3

3. Do not overreach. Keep proper footing and balance at all times. Proper

footing and balance enables better control of the power tool in unexpected

situations.

4. Use safety equipment. Always wear eye protection. Always wear

ANSI-approved safety impact goggles and a full face shield when using

and/or installing this product.

TOOL USE AND CARE

1. Do not force the tool. Use the correct tool for your application. The correct

tool will do the job better and safer at the rate for which it is designed.

2. Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users.

3. Maintain tools with care. Properly maintained tools are less likely to malfunc-

tion and are easier to control. Do not use a damaged tool. Tag damaged tools

“Do Not Use” until repaired.

3. Keep bystanders, children, and visitors away while operating tools and

equipment. Distractions can cause you to lose control. Provide barriers or

shields as needed.

4. Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect the tool’s operation. If damaged, have

the tool serviced before using. Many accidents are caused by poorly main-

tained tools.

5. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous

when used on another tool.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 4

SERVICE

1. Tool service must be performed only by qualified repair personnel. Service

or maintenance performed by unqualified personnel could result in a risk of injury.

2. When servicing a tool, use only identical replacement parts. Follow

instructions in the

“Inspection, Maintenance, And Cleaning”

section of this

manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES AND PRECAUTIONS

1. Maintain labels and nameplates on the Tire Changer. These carry impor-

tant information. If unreadable or missing, contact Harbor Freight Tools for a

replacement.

2. Make sure the Tire Changer is located on a flat, level, sturdy surface ca-

pable of supporting the weight of the Tire Changer, tires, and any additional

tools and equipment.

3. Industrial applications must follow OSHA guidelines.

4. Never stand on the Tire Changer. Serious injury could result if the Tire

Changer is tipped.

5. Do not allow children and other unauthorized people to handle or play with

the Tire Changer.

6. Do not force the Tire Changer. This tool will do the work better and safer at

the speed and capacity for which it was designed.

7. Prior to using the Tire Changer, always read and follow the instructions and

safety precautions as outlined in the tire manufacturer and vehicle

manufacturer’s owners manuals.

8. Never leave a vehicle running when changing/repairing tires. When

running an Engine in an enclosed area, the Engine produces carbon

monoxide, a colorless, odorless, toxic gas that, when inhaled, can

cause serious personal injury or death. Whenever possible, use a

carbon monoxide detector (not included) to detect excessive carbon

monoxide fumes in the work area and in the surrounding area.

9. Do not use this product if under the influence of alcohol or drugs. Read

warning labels on prescriptions to determine if your judgement or reflexes are

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 5

13. WARNING! The warnings and precautions discussed in this manual cannot

cover all possible conditions and situations that may occur. It must be under

stood by the operator that common sense and caution are factors which cannot

be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

impaired while taking drugs. If there is any doubt, do not attempt to use this

product.

10. Use the right tool for the job. Do not attempt to force a small tool to do the

work of a larger industrial tool. There are certain applications for which this

product was designed. It will do the job better and more safely at the rate for

which it was intended. Do not modify this product, and do not use this product

for a purpose for which it was not intended.

11. EXPLOSION DANGER! Never overinflate tires or other inflatable items.

When inflating a tire with compressed air, make sure to inflate the tire to

the exact PSI as recommended by the tire manufacturer. Always use a

pressure gauge (not included) to check the actual pressure in tires.

12. Always dispose of old tires in accordance with local, state, and federal

laws.

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts Lists on page 10

are included. If any parts are missing or broken, please call Harbor Freight Tools at the

number shown on the cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

1. Locate the Hex Bolts (6), Lock Washers (11), Hex Head Nuts (12), Center Post

(1), and the Pedestal Base (13). (See Assy. Diagram.)

2. Bolt the Pedestal Base (13) to the Center Post (1), using the Hex Bolts (6), Lock

Washers (11), and Hex Head Nuts (12). NOTE: The end of the Pedestal Base

with the triangular stop should be directly in front of the Bead Breaker Handle (7)

and Bead Breaker Shoe (10). (See Assy. Diagram.)

3. Bolt the two Side Base Channels (9) into place. (See Assy. Diagram.)

4. Temporarily set the Tire Changer aside. Then drill four holes in the concrete floor

surface equal to the

length

of four 7/16” diameter cement anchors (not included)

you will use to secure the Tire Changer to the floor surface. (See Figure A.)

5. Once the four 7/16” diameter holes are drilled, blow out the concrete dust from

each of the holes. (See Figure A.)

6. Set the Tire Changer back on the concrete floor surface, and align its four

mounting holes at its base with the four pre-drilled holes in the floor surface.

7. If necessary, level the Tire Changer on the concrete floor surface using a

carpenter’s level and steel shims (neither included).

8. Use a hammer (not included) to tap the four cement anchors through the four

mounting holes in the base of the Tire Changer and into the concrete floor sur-

face. Continue tapping the cement anchors until their washer rests against the

base of the Tire Changer. (See Figure A.)

9. Firmly tighten the nuts of the four cement anchors to secure the Tire Changer to

the concrete floor surface. (See Figure A.)

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 6

DRILL HOLES

TO DEPTH EQUAL

TO LENGTH OF

CEMENT ANCHOR.

INSERT

CEMENT ANCHOR

SO THAT WASHER

RESTS AGAINST

BASE OF

TIRE CHANGER.

FIRMLY

TIGHTEN

CEMENT

ANCHOR

NUT.

FIGURE A

1. Choose a concrete floor surface location for the Tire Changer that is well lighted,

offers adequate workspace, and is away from high pedestrian traffic areas.

2. The concrete floor surface should be at least 4” in depth. (See Figure A.)

3. With assistance, move the Tire Changer to the location. Use the Tire Changer’s

four 7/16” mounting holes at its base as a template for which four 7/16” holes will

be drilled in the concrete surface. Do not use a concrete drill bit larger in

diameter than 7/16”. (See Figure A.)

SECURING THE TIRE CHANGER TO A FLOOR SURFACE

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 7

OPERATING INSTRUCTIONS

Bead Breaking:

1. Before starting, use a rubber lubricant (not included) to help make bead break-

ing, mounting, and demounting easier.

2. Deflate the tire completely.

3. To break the bead from the rim of the tire, lay the tire flat on the Pedestal Base

(13). The triangular stop is used to keep the tire from sliding.

4. Insert the flat end of the Mount/Demount Bar (14) into the Bead Breaker Handle

(7).

5. Set the Bead Breaker Shoe (10) on the tire against the edge of the rim. As you

work, you may need to adjust the Bead Breaker Shoe height by removing the

Clevis Pegs (5) and moving the Shoe to the appropriate height. Then, reinsert

the Clevis Pegs.

6. Push down on the Mount/Demount Bar (14) to force the bead off the rim. If the

bead does not come off all at once, turn the tire and try again in several loca-

tions.

7. Turn the tire over, and repeat Steps #1 through #6 above.

Demounting And MountingTires:

1. After the bead is broken, place the tire up on the machine with the valve stem

facing up and the Wheel Lug Peg (3) sticking up through the lug hole of the rim.

2. Place the Spider Pedestal (4) over the Center Post (1) with the tapered side

going into the wheel hub.

3. Screw the Pedestal Cap (2) onto the Center Post (1). Lock the Spider Pedestal

(4) into place by tightening snugly by hand. Hand tightening should be adequate.

However, if you want more pressure place the flat end of the Mount/Demount

Bar (14) through the top of the Pedestal Cap and use extra leverage to tighten

the Pedestal Cap further.

4. Once the tire is held securely in place, force the flat end of the Mount/Demount

Bar (14) in between the tire and the rim. This should be done with the flat end of

the Mount/Demount Bar against the rim. Pull the Mount/Demount Bar toward

you and across the tire to force the edge of the bead over the rim.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 8

5. Work the Mount/Demount Bar (14) all the way around the Center Post (1) to

demount the bead completely.

6. Pull the tire up toward the top of the bead. Place the flat end of the

Mount/Demount Bar (14) between the tire and the rim as before. Then, repeat

the process to remove the tire from the rim completely.

7. Repair the tire. Then, mount the tire back on the rim and set the tire on top of

the rim.

8. Hook the end of the Mount/Demount Bar (14) over the edge of the rim.

9. Push the tire forward over the edge of the rim at the place the Mount/Demount

Bar (14) is.

10. Position the bead so it will slide across the flat portion of the hook end of the

Mount/Demount Bar (14).

11. Press down on the tire with one hand against the rim. With the other hand, pull

the Mount/Demount Bar (14) clockwise around the Center Post (1) until the bead

starts to mount on the rim. It should only have to move a few inches before you

can let go of the tire and use both hands on the Mount/Demount Bar.

12. Continue around the rim until the tire mounts over the edge of the bead. Repeat

this procedure on the second bead to completely mount the tire.

13. IMPORTANT: If the tire bead starts to seat while you are mounting the tire, the

tire will need to stretch more and will be more difficult to mount. To prevent this,

push down on the tire so it doesn’t seat on the upper edge of the rim during

mounting.

14. NOTE: The bead running across the top of the Mount/Demount Bar (14) keeps

the Bar hooked on the edge of the rim. The tire bead will run across the top (flat

part of the mounting end of the Bar) and against the curved Wheel Lug Peg (3)

when mounting the tire on the rim.

ATV Tires:

1. NOTE: ATV tires are difficult to demount and mount because of their small

diameter. Additionally, the tires are soft and bend easily when breaking the bead.

2. If the Bead Breaker Shoe (10) slides off the tire, hold the Shoe in place and work

around the rim breaking the bead a little at a time.

3. Place lubricant between the tire and rim to make it slide off easier.

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 9

4. If the wheel has a tall rim with a small inside diameter so that the rim does not go

over the round plate on the Center Post (1) and will not accept the Spider Pedes-

tal (4), or let the Wheel Lug Peg (3) through its hole, you should still be able to

use this Tire Changer to demount and mount the tire. Most rims are held in

place adequately by tightening the Center Post Cap down snugly. With the Cap

in place, you should still be able to hold the rim in place to mount and demount

the tire as discussed previously.

INSPECTION, MAINTENANCE, AND CLEANING

1. Before each use, inspect the general condition of the Tire Changer. Check for

loose screws, misalignment or binding of moving parts, cracked or broken parts,

and any other condition that may affect the safe operation of the Tire Changer. If

abnormal noise or vibration occurs, have the problem corrected before further

use. Do not use damaged equipment.

2. To clean the Tire Changer, use a mild detergent or mild solvent. Then, dry.

3. CAUTION! All maintenance, service, or repairs not mentioned in this

manual must only be performed by a qualified service technician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST

AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI-

THER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR

WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO

REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR

DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE-

MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,

AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARIS-

ING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE-

MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF

REPLACEMENT PARTS THERETO.

NOTE:

Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

PARTS LIST AND ASSEMBLY DIAGRAM

SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 10

12 11

Part # Description Qty. Part # Description Qty.

1 Center Post 1 8 Hump Pin & Rings 2

2 Pedestal Cap 1 9 Side Base Channel 2

3 Wheel Lug Peg 1 10 Bead Breaker Shoe 1

4 Spider Pedestal 1 11 Lock Washer (3/8”) 4

5 Clevis Pegs (7/16”) 2 12 Hex Head Nut (3/8” x 16) 4

6 Large Hex Bolt (3/8” x 16 x 1”) 4 13 Pedestal Base 1

7 Bead Breaker Handle 1 14 Mount/Demount Bar 1

Inhaltsverzeichnis

Andere Central Machinery Elektrowerkzeuge Handbücher

Central Machinery

Central Machinery 92066 Bedienungsanleitung

Central Machinery

Central Machinery 59766 Montageanleitung

Central Machinery

Central Machinery 59490 Montageanleitung

Central Machinery

Central Machinery 35570 Bedienungsanleitung

Central Machinery

Central Machinery 43378 Installationshandbuch

Central Machinery

Central Machinery 42927 Betriebsanleitung

Central Machinery

Central Machinery 32966 Stücklistenhandbuch

Central Machinery

Central Machinery 03135 Bedienungsanleitung

Central Machinery

Central Machinery 63995 Montageanleitung

Central Machinery

Central Machinery 43353 Bedienungsanleitung

Central Machinery

Central Machinery 05907 Kurzanleitung

Central Machinery

Central Machinery 90589 Bedienungsanleitung

Central Machinery

Central Machinery 31849 Kurzanleitung

Central Machinery

Central Machinery 32650 Installationshandbuch

Central Machinery

Central Machinery 38144 Bedienungsanleitung

Central Machinery

Central Machinery 39741 Bedienungsanleitung

Central Machinery

Central Machinery 33497 Montageanleitung

Central Machinery

Central Machinery 44506 Installationshandbuch

Central Machinery

Central Machinery 63471 Montageanleitung

Central Machinery

Central Machinery 38119 Installationshandbuch

Central Machinery

Central Machinery 92804 Bedienungsanleitung

Central Machinery

Central Machinery 91130 Bedienungsanleitung

Central Machinery

Central Machinery 39955 Montageanleitung

Central Machinery

Central Machinery 65589 Installationshandbuch

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch