CenturionPro 3.0 Bedienungsanleitung
OWNERS MANUAL
3.0
2cprosolutions.com1 855 535 0558
GENERAL
• Do not move, disassemble, clean or inspect the trimmer while the power is still
connected to the machine.
• Replacement parts are specic to The 3.0 and must be purchased from an
authorized dealer only. Substituting factory parts with non-approved third-
party replacements may result in damage to the machine or bodily harm.
• Keep all individuals a safe distance from the work area. Do not operate the
machine around children.
• Do not remove safety labels. Replace any and all labels if they become
damaged or obscured.
CONNECTION
• As with home appliances, The 3.0 must be used in connection with a properly
grounded receptacle.
• Never plug in or power up your trimming machine if the protective shrouds
are removed.
• Do not use extension cords over 8m (25ft) in length to power the 3.0.
The 3.0 is a high-speed trimming system, requiring that specic safety precautions are practiced during operation to reduce the risk of personal injury. Improper use
of The 3.0, or any CenturionPro product, may cause serious or fatal injury. Please ensure you read the operations manual and warning notes before using the 3.0.
IMPORTANT SAFETY INFORMATION
CENTURIONPRO SOLUTIONS:
3.0 AUTOMATED TRIMMING SYSTEM
OPERATION
• The initial set up will show assembly instructions to unpack and set-up your machine.
• Your bed bar blade has been factory set to cut perfectly. Please do not adjust your
blade until it is time to clean the machine. Also, please watch the video tutorial
located on our website on how to adjust your blade before attempting.
• Safety glasses should be worn at all times while operating The 3.0.
• Do not operate any trimming machine while tired or under the inuence of
medication, drugs or alcohol.
• Do not put anything other than plant material into the tumbler. Doing so may cause
damage to the tumbler, the machine or result in bodily harm.
• Operate the trimmer in a well ventilated area in order to prevent overheating.
MAINTENANCE
• Never leave The 3.0 system running unattended.
• Never conduct maintenance or cleaning while the machine is plugged in.
• Do not modify or adapt any part of the trimmer or its accessories. Doing so may
cause irreversible damage to the machine or result in bodily harm.
DO NOT LEND OUT OR RENT YOUR 3.0 WITHOUT THIS OPERATING MANUAL.
A FIRST TIME USER SHOULD OBTAIN PROPER INSTRUCTION PRIOR TO USE.
3
OWNERS MANUAL
3.0
For more information or to watch our DIY video tutorials visit cprosolutions.com
TOOL REQUIREMENTS
AMOUNT SIZE TOOL ITEM
1 x #2 PHILLIPS SCREWDRIVER
1 x 3/32" T-Handle Allen Wrench
1 x 5/32" T-Handle Allen Wrench
1 x 1/8" T-Handle Allen Wrench
1 x 3/16" T-Handle Allen Wrench
1 x 3/8" Wrench
TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
COMPONENT OVERVIEW
MACHINE ASSEMBLY
COVER ASSEMBLY
LEAF COLLECTOR ASSEMBLY
TRIPLE BAG KIEF COLLECTION SYSTEM
HOPPER ASSEMBLY - MEDICAL GRADE
HOPPER ASSEMBLY - CLOTH
CLEANING & MAINTENANCE - BLADE REMOVAL, TRIMMER CLEANING
CLEANING & MAINTENANCE - LEAF COLLECTOR CLEANING
MACHINE MAINTENANCE
QUANTANIUM COATED TUMBLERS
TRIM BOTH WET & DRY
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
ADDITIONAL ASSISTANCE
SPECIFICATIONS
WARRANTY
NOTES
2
3
4
5
6
7
7
8
9
10
11
12
12
13
14
16
16
17
18
19
4cprosolutions.com1 855 535 0558
COMPONENT OVERVIEW
BRUSH (x3)
TUMBLER O-RING
TUMBLERS (x3)
UPPER FRAME (x3)
COVER
MOTOR
BLADE ADJUSTMENT
ASSEMBLY
BEARING COVER (x3)
CUTTING REELS (x3)
LOWER FRAME
Requires Cleaning
See Pg. 10
Requires Cleaning
See Pg. 10
BED BAR BLADE &
MAGNET BAR (x3)
Requires Cleaning
See Pg. 10
5
OWNERS MANUAL
3.0
For more information or to watch our DIY video tutorials visit cprosolutions.com
MACHINE ASSEMBLY
STEP 1:
PLACE TUMBLERS
IN GROOVES x 3
STEP 4:
INSTALL EXHAUST
STEP 2:
INSTALL UPPER
FRAMES x 3
STEP 3:
INSTALL
COVER
- Install using 6 bolts
(3 sets on each side)
- Exhaust in a seperate box
when shipped.
Tighten 12 sealing
bolts & washers.
Place cover
over Upper
Frame.
Note: longer end of Tumbler
should be installed on the side
that faces the hopper.
6cprosolutions.com1 855 535 0558
BEARING
COVER
BELT
COVER
STEP 1:
INSTALL BELT COVER TO THE GLADIATOR STEP 2:
INSTALL BEARING COVERS TO THE GLADIATOR
IT IS UNSAFE TO OPERATE
THE GLADIATOR TRIMMER
WITHOUT COVERS.
COVER ASSEMBLY
Install using 9 washers and 9 bolts Install using 2 washers and 2 bolts per cover
OUTSIDE BAG
SECOND BAG
INSIDE BAG
LEAF COLLECTOR
STEP 1:
ATTACH BAG SYSTEM
TO LEAF COLLECTOR
- Secure with 9" hose clamp
- Requires cleaning (pg. 9)
9”
7
OWNERS MANUAL
3.0
For more information or to watch our DIY video tutorials visit cprosolutions.com
LEAF COLLECTOR ASSEMBLY
Kief is becoming wildly popular due to the rise of extractions. Unfortunately, machines that require
sprays can contaminate and destroy your Kief, making it virtually useless. Thankfully, CenturionPro
oers an optional non-stick Quantanium coating on the tumblers. This means no spray is needed so
your Kief remains 100% pure and usable. To further benet growers, we developed a new triple-bag
ltration system. This system will assist with Kief collection and separating it from your trim. This allows
you to safely and easily collect the precious trichomes for further processing and prots. With your
machine, you will see that you have a black mesh bag, a white lter bag, and an outer polyester bag.
The black bag goes inside the white lter bag, which then goes inside the polyester bag.
THE GREEN LEAFY TRIM WILL COLLECT
IN THE NEW INNER BLACK BAG.
STEP
1
STEP
2
STEP
3
STEP
4
ONLY THE KIEF MAKES IT THROUGH THE BLACK
BAG AND COLLECTS IN THE WHITE FILTER BAG.
OUTER POLYESTER BAG CATCHES ANY KIEF THAT
MAY PASS THROUGH THE WHITE FILTER BAG.
TURN OFF THE MACHINE AND REMOVE THE INNER
BLACK MESH BAG AND THEN EXTRACT KIEF. ENJOY!
TRIPLE-BAG KIEF COLLECTION SYSTEM
HOW IT WORKS
THE BAGS ARE EASY TO WASH WITH A
PRESSURE WASHER USING COLD WATER.
THE BAGS CAN ALSO BE PUT THROUGH
THE WASHING MACHINE, BUT IT IS
RECOMMENDED TO BE RUN THROUGH
ON A COLD DELICATE CYCLE ONLY.
STEP 2:
ATTACH EXHAUST TO LEAF
COLLECTOR
No bolts needed
(air pressure will hold the system together)
ZIPPERS
8cprosolutions.com1 855 535 0558
STEP 1:
ATTACH HOPPER TO
THE BRACKETS
HOPPER ASSEMBLY - MEDICAL GRADE
Install using 6 washers and 6 bolts
(3 sets of bolts and washers on each side)
STEP 2:
ATTACH BRACKETS TO MACHINE
(BELT SIDE OF MACHINE)
Attach using 4 bolts and 4 washers
(2 sets of bolts and washers on each side)
HOPPER
BRACKET
GMP COMPLIANT
PLASTIC HOPPER
G
o
o
d
M
a
n
u
f
a
c
t
u
r
i
n
g
P
r
a
c
t
i
c
e
C
o
m
p
l
i
a
n
t
9
OWNERS MANUAL
3.0
For more information or to watch our DIY video tutorials visit cprosolutions.com
HOPPER ASSEMBLY - CLOTH
STEP 1:
ASSEMBLE FRAME
STEP 2:
SECURE HOPPER BAG
TO FRAME
STEP 3:
CONNECT THE
HOPPER TO
THE MACHINE
A) Ensure the RODS are facing
inward. Secure with:
8 - 1/4" bolts
8 - 1/4" washers
8 - 1/4" locking nuts INWARD
A) Ensure the FRAME &
OPENING match the
3.0 machine exactly.
A) Ensure the FRONT FRAME &
OPENING match.
AVOID
WATER
ON THE
MOTOR
10 cprosolutions.com1 855 535 0558
CLEANING & MAINTENANCE
BLADE REMOVAL
CLEANING THE 3.0
For optimal performance and life, the components must be cleaned every 3 to 4 hours.
For optimal performance and life, the BLADE and the MAGNET BAR must be removed and cleaned every few hours of operation.
INSTALLATION IS REVERSE ORDER OF REMOVAL
IMPORTANT NOTE:
- Clean by spraying hot pressurized water: 1500 - 2000 psi
- Run the 3.0 for 15 mins after washing to allow components to dry
- DO NOT spray Quantanium Coated tumblers (see page. 12)
STEP 1:
UNLOCK BLADE
STEP 1:
UNLOCK
BLADE
STEP 2:
UNPIN BLADE STEP 3:
BLADE & MAGNET REMOVAL
STEP 3:
CLEAN CUTTING
REEL & SHROUD
STEP 2:
CLEAN
ELECTROPLISH
TUMBLER
STEP 4:
BLADE & MAGNET CLEANING
- Remove 3/32" bolt
- Loosen the surrounding set screws ONLY
- Pivot the pin up from the blade - Carefully slide blade o magnets
- Carefully Remove bed bar blade
Clean the length of the
cutting reel and shroud
of all debris using hot
pressurized water.
Clean the length of
the tumbler of all
debris using hot
pressurized water.
Clean the length
of the brush of all
debris using hot
pressurized water.
- Clean blade and magnet bar with a utility knife.
IMPORTANT NOTE:
YOUR BED BAR BLADE HAS BEEN FACTORY SET TO CUT PERFECTLY. PLEASE DO NOT ALTER THE SETTINGS OF YOUR MACHINE. YOU
MIGHT NOTICE SLIGHT CONTACT BETWEEN YOUR ROTATING CUTTLING REEL AND THE FLAT BED BAR BLADE - THIS IS NORMAL.
Dieses Handbuch passt für folgende Modelle
1
Andere CenturionPro Trimmer Handbücher
CenturionPro
CenturionPro DBT 4 Bedienungsanleitung
CenturionPro
CenturionPro Original Bedienungsanleitung
CenturionPro
CenturionPro Original Bedienungsanleitung
CenturionPro
CenturionPro GC1 Bedienungsanleitung
CenturionPro
CenturionPro XL Series Bedienungsanleitung
CenturionPro
CenturionPro The Gladiator Bedienungsanleitung
CenturionPro
CenturionPro THE MINI Bedienungsanleitung
