Channel Vision 6535 Bedienungsanleitung
6535
1080P 2 Megapixel Mini Dome IP Camera w/POE
IR LEDs & Two Way Audio
• Intelligent Entertainment • Infrastructure • Security Solutions
Table Of Contents
2
Introduction ................................................................................ Page 3
Safety Warnings.......................................................................... Page 4
Cable Pin Out.............................................................................. Page 5
Camera Assembly....................................................................... Page 6
IP Setup....................................................................................... Page 7-13
Configuring Internet Explorer....................................................... Page 14 Live
Viewing........................................................................................ Page 15-16
Configuration............................................................................... Page 17
System Configuration.................................................................. Page 18
User Management....................................................................... Page 19
System Update............................................................................ Page 20
Network....................................................................................... Page 21-25
ONVIF ........................................................................................ Page 26
Video Settings............................................................................. Page 27-33
Event List.................................................................................... Page 34-35
Schedule..................................................................................... Page 36
Port Forwarding......................................................................... Page 37
UPNP Port Forwarding............................................................... Page 38
Factory Reset............................................................................. Page 39
Specifications............................................................................. Page 40
Warranty...................................................................................... Page 41
The 65 is a
Built-in web server allows a user to view high quality, real-time video with Internet Explorer browser.
Multi-Stream H.264, MJPEG and MPEG
Live video can be recorded to an NVR and played back remotely, as well as viewed from many mobile
phones and other devices.
Designed for large commercial projects with 100’s of cameras or a single family house requiring a camera at
the front door.
Android, iPhone & iPad app available from the respective store
2.8mm fixed focal length lens
36 Camera CMS (Central Management software, included) will allow you to see all of your cameras
anywhere in the world in multiple locations at the same time
High definition 1080P at 30FPS
Digital Wide Dynamic Range
Power Over Ethernet or 12vDC power supply
Two Way Audio
Micro SD card recording slot inside camera
6535 Features:
Channel Vision’s 6535 IP mini dome camera offers superior image quality with a 2 megapixel CMOS sensor
and has the ability to capture images up to 1920 x 1080 pixels.
With H.264 compression, less bandwidth and storage space are used, while delivering full resolution at max
frame rate with faster speeds over the internet. Monitoring can be done anywhere an internet connection is
available even from a Smart-phone. The 6535 also features event triggered motion recording.
35 1080p 2 Megapixel Mini Dome IP Camera w/POE, IR and Two Way Audio.
Model 6535
6535
3
Safety Warnings
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Install in accordance with these instructions.
7 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
that produce heat.
8. Do not defeat the safety purpose of the polarized-type plug. A polarized plug has two blades with
one wider than the other. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point of exit from the apparatus.
10. Only use attachments/accessories specified by Channel Vision.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the inside of the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
13. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the
user to presence of uninsulated dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
14. The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance accompanying the appliance.
15. Inside of apparatus shall not be exposed to dripping or splashing and objects filled with liquids.
CAUTION: To reduce the risk of electric shock,
do not remove the cover (or back). There are no
user-serviceable parts inside, refer servicing to
qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
4
The breakout cable on Channel Vision’s IP Cameras are used for motion detection, event triggering,
alarm notifications etc.
The provided interface connections are explained below.
1. Audio Output ( Audio Out + Ground)
An audio output that can be fed into an amplifier
2. Audio Input
A microphone is built into this IP camera
3. Reset to factory default
To restore your IP camera to Channel Vision default settings, unplug the power supply from the
camera. Then, plug in power cable and press the “reset” button on the camera for 30 seconds. Once
30 seconds have passed, remove the electric wire and plug in the Ethernet cable. Use IP installer to
find the camera IP. (Default is http://192.168.1.200) Default username and password is “admin”
Cable Pin Out
PoE (Power Over Ethernet)
5
Power over Ethernet (PoE) is a technology that integrates power into a standard LAN infrastructure. It
enables power to be provided to the network device, such as an IP phone or a network camera, using
the same cable that is used for the network connection.
The PoE switch eliminates the need for power outlets at the camera locations and enables an easier
application of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days a week operation.
The recommended requirement for a PoE switch is 802.3at, 30.0W.
The minimum requirement for a PoE switch is 802.3af 15W.
If using a PoE switch that does not meet these specifications, full functionality may not be supported.
WARNING: DO NOT CUT THE BREAKOUT CABLE.
CUTTING THE CABLE WILL VOID THE WARRANTY ON THE DEVICE.
To access the micro
SD card slot and
reset button, remove
the camera cover.
Camera Assembly
6
Pop out the plastic tab to run your wires through the hole.
Use screws to mount the bottom of camera to the ceiling or the wall. After adjusting the lens, tighten the
screws.
Your IP Camera comes set to DHCP by default. This means that, just like your laptop computer or desktop PC, an IP
address is automatically assigned to the IP camera by your router. This, combined with UPnP (Universal Plug and
Play), will make the IP setup of the IP camera a quick and easy task to accomplish.
*For the best security, Channel Vision recommends you use a static IP setting and standard port forwarding.
1. Open IP installer. This is located on your software disk.
2. An IP address should already be assigned
In the example below, the router has assigned 192.168.1.199 to the IP Camera
3. Double click on the name of the IP Camera. This will open the IP camera in your default browser
Option One: Assigning an IP Address (DHCP)
7
Connecting To The IP Camera (DHCP)
5. The first time you connect to the camera via Internet Explorer, it will ask you to install the ActiveX control.
Internet Explorer 6, 7, 8, or 9 must be used to run this ActiveX control.
4. You will be prompted for a username and password.
The default username is ‘admin’
The default password is ‘admin’
Installing The ActiveX Control
8
1. Use the software, “IP Installer” to assign the IP address to your IP Camera.
You can find "IP Installer" in the supplied CD.
2. Execute IP Installer, located on your disk under the folder “Software”
3. If Windows prompts you to unblock IP Installer, you must select “unblock”
There are 3 options of IP configuration:
A. Fixed IP (Public IP or Virtual IP)
B. DHCP (Dynamic IP)
C. Dial-up/DSL (PPPoE)
"IP Installer" will search all IP Cameras connected to your LAN network.The user can
click “Search Device” to search again.
Double click the camera name to go directly to the camera
Option Two: Assigning an IP Address (Static)
9
Assigning an IP Address (Static) /cont
4. Click the start icon on your computer.
5. Type the word “run” and select enter on your keyboard.
6. Type in ‘cmd’ and press enter on your keyboard, or press ok.
7. Type in ‘ipconfig /all’ into the DOS prompt that appears. Press “Enter”.
8. Write down your computer’s IP address.
Do not use the same IP address as the computer in the IP Camera.
In the example below, the computer’s IP address is 192.168.1.74.
The IP address of the IP camera must be different than the IP address in the computer.
Each network-able device in your network has an IP address assigned.
The IP chosen for your IP Camera is not the same address as any other device on your network.
10
Inhaltsverzeichnis
Andere Channel Vision Sicherheitskamera Handbücher
Channel Vision
Channel Vision 6125 Bedienungsanleitung
Channel Vision
Channel Vision 6005 Bedienungsanleitung
Channel Vision
Channel Vision 6401 Bedienungsanleitung
Channel Vision
Channel Vision 6105 Bedienungsanleitung
Channel Vision
Channel Vision 6531 Bedienungsanleitung
Channel Vision
Channel Vision 6125 Bedienungsanleitung
Channel Vision
Channel Vision 6333-O Bedienungsanleitung
Channel Vision
Channel Vision 6710 Bedienungsanleitung
Channel Vision
Channel Vision 6126 Bedienungsanleitung
Channel Vision
Channel Vision 6144 Bedienungsanleitung
Channel Vision
Channel Vision 6127 Bedienungsanleitung
Channel Vision
Channel Vision 5102-FMC-II Bedienungsanleitung
Channel Vision
Channel Vision 6010 Bedienungsanleitung
Channel Vision
Channel Vision 6901 Bedienungsanleitung
Channel Vision
Channel Vision 6010-B Bedienungsanleitung
Channel Vision
Channel Vision 6010 Bedienungsanleitung
Channel Vision
Channel Vision 6127 Bedienungsanleitung
Channel Vision
Channel Vision 6821-0 Bedienungsanleitung
Channel Vision
Channel Vision 6115 Bedienungsanleitung
Channel Vision
Channel Vision 6325-S Bedienungsanleitung
