Chanson Water VS-70 Bedienungsanleitung

chanson ionizer quick start guide
important notes before you get started, troubleshoong & ionizer care
www.energiseforlife.com
01604 670820

chanson quickstart
important notes before you start
1Start Slowly & Build Up: when you rst switch from drinking tap water to ionized water you need to start slowly. Remember,
ionized water at pH 9.5 is over 100x more alkaline than tap water, so you should start slowly and build up. Start by drinking at
the lowest alkaline level for 7-14 days, then move onto the second alkaline level and nally onto the third alkaline level.
2Never Go Above pH 9.5: there is no benet to be gained by drinking water with a pH of above 9.5 and we do not recommend
it. Your ionizer will sound a warning when the pH is above this level (i.e the Strong Alkaline seng)
3The water for the setting you select will always come out of the stainless steel spout.
Listen to the Prompt “The third secon of alkaline water is in progress....”: VS-70: To select water
button (circle with line through) to start flow. Then listen to the prompt. For the Miracle Max
Don’t Use Hot Water: do not use really hot water through the ionizer as this will damage the lter
and ionizaon chamber. Warm is ne, but hot is not. You can boil ionized water with only minimal
loss of pH and anoxidants.
4
5
seng and start water ow, press “+” or “-“ to choose the required seng then press the power
turn on the tap and select the appropriate alkaline/acid setting. Touch the "POWER" key and the red
indicator in the key lights on. However, for both models it takes a few seconds for the ionization
process to begin. This is because the ionizer flushes through the stagnant water that is still in the
ionizer from its last use. If you’ve
used the ionizer within the last half an hour you don’t need to wait for the prompt.

What if I am in a very hard or so water area? If you are in a very hard water area then you may need to change a seng on the
machine called the TDS. You can nd out if you are in a very hard/so water area from your local water board. If you are in a very
hard water area (300 TDS or over) then you need to set the TDS seng to be 14. If you are in a very so water area (under 75
TDS) then you need to set the TDS seng to be 9. To do this follow these instrucons:
How to Adjust the TDS on the VS-70?
Hold down the Plus and Minus buons at the same me unl the screen turns orange. If the screen does not turn orange, press
the “OK” buon and start again. You must touch the Plus and Minus buons at precisely the same moment. As soon as the screen
turns orange, press the following buons in sequence: Menu -> Plus -> Menu -> Minus.
The screen will show the TDS seng on the top line. Press “OK” immediately. Noce the number above the green bar graph. If
you have so water, press Plus or Minus unl you see the number 9. Press “OK”. The system is now adjusted for so water. If you
have hard water, the machines are already set at TDS 14. However, you may sll check it. If it’s not set properly, press the Plus
buon unl you see 14. Then, press “OK.” If you do not press “OK” in me, the TDS will not be saved. Make sure you know what
step is next so that you do not delay in pressing the correct key. Aer TDS is set, press the Plus key and you will see “EXIT”. Press
“OK” and you are back to the main screen. Remember if you fail to press any key in the me alloed, the machine will reset itself
back to the main menu. If this happens, you will need to repeat the TDS sequence.
How to Adjust the TDS on the Miracle Max?
6
WARNING: DO NOT CHANGE ANY OTHER SETTINGS IN THE ADVANCED MENU OR SET THE TDS TO BE ABOVE 14. DOING SO WILL VOID YOUR WARRANTY.
Press and hold "MODE" for three seconds to enter the setting display.
Double click "ENTER" to enter the TDS window. The current TDS setting is shown on the screen.
Press "+" or "-" to select the TDS you want and press "ENTER".
Press and hold "MODE" for five seconds to exit and save your setting.

frequently asked questions
How long does the ionized water last?
There are four benets of ionized water, and they last for the following amounts of me:
- pH: lasts up to 3 weeks in a sealed container
- ORP (anoxidant content): lasts up to 8 hours
- Mircroclustering: 3-4 days
- Acve hydrogen: 5-10 minutes
In an ideal world, you will be able to drink 50% of your ionized water within a couple of minutes of producing it. If you do want to store
the water and drink throughout the day, keep it in an airght container and try not to shake it too much as this hastens the ORP loss. A
good idea, if you’re taking a bole with you is to ll it right to the very top so that there is no room for the water to splash around in the
bole.
How long does the lter last?
The internal flter (PJ-6000) lasts 20,000 litres - approximately 10-12 months for a family of 4. The replacement flter costs £39.99. On
both the Miracle and VS-70 there is a lter life indicator that displays on the panel showing a % of lter life remaining.
How long does the pre-lter last?
The C3 Pre-Filter also lasts 20,000 litres. Please note that the pre-lter is not necessary to the running of the Chanson ionizers, you do
not have to use one - it is enrely oponal.
Can I drink the ionized water hot/cold?
Yes! Drinking the ionized water hot or cold will not eect the qualies of the water. Boiling the water reduces the pH and ORP very
slightly, but not signicantly, so feel free to use the ionized water with your tea & in cooking.

How much ionized water should I drink per day/hour?
You should not drink more than 1 litre an hour, as this can overload the kidneys. As a general rule of thumb:
o Maximum amount of ionized water a day: 1oz per pound of body weight.
o Minimum amount of ionized water a day: ½ oz per pound of body weight.
o Always check with a qualied doctor before making any changes to your diet. Please see our disclaimer on page 16.
What are the tiny bubbles in the ionized water?
This is the acve hydrogen in the water. The ionizaon process increases the concentraon of hydrogen molecules and this is what
raises the pH level of the water.
I have just started drinking ionized water and have got cold and u like symptoms (e.g. weakness, nau-
sea, and headache). Is this normal?
When you rst begin to drink the ionized water you may experience detox symptoms. This is perfectly normal, although it is always
recommended that you check with a health professional if you have any concerns. Start drinking the water at the lowest alkaline pH
level (Low Alkaline Seng) for the rst 7-14 days etc and slowly increase the alkalinity over me. Many detox symptoms are a good
sign, as there are toxins which needs to be ushed out like acidic waste and chemicals. This is the body’s defence mechanism!
Our weakest body parts stores polluon/acids which are reected as symptoms/pain in certain weak body parts. These may inially
increase, but will eventually decrease as our body ushes out the acidic waste.
Can ionized water be drunk during pregnancy, trying to conceive or breastfeeding?
It is not recommended to start drinking ionized water during pregnancy, while or trying to conceive or breaseeding. When you rst
start drinking ionized water some detoxicaon will be encouraged and it is not recommended to detox and release toxins into your
system during pregnancy. You should always consult a qualied doctor before making any changes to your lifestyle.
Can I drink ionized water with my medication?
You should NOT drink ionized water while you take any prescribed medicaon. Do not drink ionized water for 30 minutes before or
aer taking medicaons. This is because the ionized water can dramacally increase absorpon rates and medicaons are designed
and prescribed based upon normal absorpon mes.

How are pH levels & antioxidants measured?
pH levels of the water can be measured in two ways. Firstly, pH can be tested using a digital pH meter (our favourite is the pH Testr
from Oakton). However, if you do not want to buy an expensive meter you can use the pH dye soluon that you received with the
Chanson ionizer. Just a few drops will give you a rough indicaon of the alkalinity of the water.
It is important to note that no maer how much of the dye you add, the colour will not change based upon this. It is also important to
note that these indicator dyes are not able to measure strong acid water and only go to pH 5.
It is not possible to test the pH of the water using pH strips such as the pHion Sx or the Energise pH Strips. These strips only work on
bodily uids by reacng with enzymes.
Anoxidants in liquids are measured using an ORP meter, available from American Marine USA. To test for the existance of anoxidants
in the water, you can add an iodine soluon (available from most chemists). If the ORP is negave then the iodine soluon will not
change the colour of the water. Add 4-5 drops to 250ml. If you do the same to tap water (which has a posive ORP) then the water will
turn yellow.
Can I make my baby’s formula with alkaline ionized water?
In the case of infants (unl about a year old), since breast milk or milk is the only thing they consume, the intesnal movement is
generally dierent from adults, and the use of alkaline ionized water is not encouraged unl the infant begins to consume more
sophiscated foods. In any case, alkaline water should not be used to make powdered milk for infants. Use the puried water (pH 7)
seng instead.
What if I am in a very hard or soft water area?
If you are in a very hard water area then you may need to change a seng on the machine called the TDS. You can nd out if you are in
a very hard/so water area from your local water board.
If you are in a very hard water area (300 TDS or over) then you need to set the TDS seng to be 14. If you are in a very so water area
(under 75 TDS) then you need to set the TDS seng to be 9.

To do this follow these instrucons:
How to Adjust the TDS on the VS-70?
Hold down the Plus and Minus buons at the same me unl the screen turns orange. If the screen does not turn orange, press the
“OK” buon and start again. You must touch the Plus and Minus buons at precisely the same moment. As soon as the screen turns
orange, press the following buons in sequence:
Menu -> Plus -> Menu -> Minus.
The screen will show the TDS seng on the top line. Press “OK” immediately. Noce the number above the green bar graph. If you
have so water, press Plus or Minus unl you see the number 9. Press “OK”. The system is now adjusted for so water. If you have
hard water, the machines are already set at TDS 14. However, you may sll check it. If it’s not set properly, press the Plus buon unl
you see 14. Then, press “OK.” If you do not press “OK” in me, the TDS will not be saved. Make sure you know what step is next so
that you do not delay in pressing the correct key. Aer TDS is set, press the Plus key and you will see “EXIT”. Press “OK” and you are
back to the main screen. Remember if you fail to press any key in the me alloed, the machine will reset itself back to the main menu.
If this happens, you will need to repeat the TDS sequence.
How to Adjust the TDS on the Miracle Max?
important note: DO NOT CHANGE ANY SETTINGS IN THE
ADVANCED MENU OR SET THE TDS TO BE ABOVE 14. DOING
SO WILL VOID YOUR WARRANTY.
Press and hold "MODE" for three seconds to enter the setting display.
Double click "ENTER" to enter the TDS window. The current TDS setting is shown on the screen.
Press "+" or "-" to select the TDS you want and press "ENTER".
Press and hold "MODE" for five seconds to exit and save your setting.

WARNING: DO NOT CHANGE ANY OTHER SETTINGS IN THE ADVANCED MENU OR SET THE TDS TO BE ABOVE 14.
DOING SO WILL VOID YOUR WARRANTY.
Can you become too alkaline?
It really is not possible to over-alkalise for the vast majority of the populaon. The body creates acids naturally through daily processes
such as metabolism and we need to remain alkaline by eang green, fresh and healthy, by drinking clean water, by exercising and by
managing our emoons not to be stressed, anxious or angry. If you eat really badly, never exercise, are chronically dehydrated and sll
have a urine pH of over 8 then you are in the minority of people who ‘might’ over alkalise.
If you were to over alkalise your body would moderate the same way as it does when you are over-acid. And considering that most
people are over-acid 99% of the me, the rare occassion of being over alkaline will not be any worry!
Soda, beer, coee, juices as well as almost all of the foods we eat can have PH levels of 5 or lower, one cup of coee needs 20 glasses of
ionized water to neutralize. Geng frustrated or angry oods the body with acids, it is not easy to become alkaline. In fact, if you are
living a ‘normal’ lifestyle it is almost impossible!
Why is the tap plastic and not metal?
The tap on the VS-70 is constructed from plasc as extensive tesng showed an extended product life and safety.

ionized water uses...
pH 10+
pH 9.0 - 9.5
pH 8.5 - 9.0
pH 8.0 - 8.5
pH 7.0 - 8.0
pH 3.0 - 6.0
pH 3 and below
Strong Alkaline
Alkaline 3
Alkaline 2
Alkaline 1
Filtered Water
Strong Acid
Acidic
Clean fruit & vegetables to remove pescides. Clean dishes & remove grime. Remove oil
stains and collar stains. Clean clothes.
Used for daily drinking - this is the alkaline, ionized water to drink every day! Also used
to soak fruits and vegetables to increase anoxidant content of the food
Great for fague and sleepiness. Drink the water at this level for 7-10 days aer drinking
the rst level of alkaline water for 7-14 days.
Drink the water at this level for the rst 7-14 days of owning the ionizer. This level is sll
highly alkalising and anoxidant rich. If you move up a level and feel nausea, move back
to this level.
Use this level when taking medicaons (see faq on page 3) and when preparing
powdered milk for your infant.
Acidic 1: Great for the skin! Water at this level can be used externally as a make-up remover,
toner, cleanser and more. You can also use the strong acid water for this purpose unless
you have highly sensitve skin. Acidic 2: Great for cleaning and washing.
Anbacterial and sterilising when below pH 2.9 so can be used to clean the oors,
kitchen, bathroom and windows. Keep in a spray bole to use around the house.

troubleshooting
The ioniser is not producing alkaline/acid water
Soluon 1: What are you using to measure the pH produced by the machine?
Please ensure that you are using the pH tesng kit included with the machine. This is produced by a third party to accurately and
independently measure the pH of the produced water.
DO NOT USE pH tesng kits from pharmacies, Energise pH Strips or pH Sx: these are only designed for tesng the urine and saliva but
not the water. DO NOT USE Pool tesng kits: these only have a small pH range of 6-8 and are therefore not able to test the pH level of
the water outside this range.
If in any doubt we sell digital pH metres on our website at www.energiseforlife.com.
Soluon 2: The water ow is too fast
If the water ow is too fast you will not get the expected result in pH. The water ow should be as follows:
o Miracle model: max effective fow rate is 2 - 2.5 litres per min i.e. 1 litre in 30 seconds
o VS – 70 model: max eecve ow rate is 1.5 litres per min. i.e. litre in 40 seconds
You can test this by ming how long it takes to ll a 1 litre water jug. If you need to adjust, turn down ow rate on your water tap to
50% of current level
Soluon 3: pH water tesng is carried out too quickly aer turning on the ioniser
• Aer you turn the ioniser on there is a warm-up period.
• Before you take a sample wait 10 sec aer the voice says “in process”, aer the power has been sent to the plates.
Andere Handbücher für VS-70
1
Inhaltsverzeichnis
Andere Chanson Water Wasserspender Handbücher


















