Chatsworth Products RIM-600 Bedienungsanleitung

Remote Infrastructure Management

(RIM-600)

User Manual

Version 1.04

800-834-4969

techsupport@chatsworth.com

www.chatsworth.com

registered trademarks and TeraFrame is a trademark of Chatsworth Products, Inc.

All other trademarks belong to their respective companies. MKT-60020-328-GT 1/06

Every effort has been made to ensure that the information in this document is complete, accu-

rate and up-to-date. Chatsworth Products, Inc. assumes no responsibility for the results of errors

beyond its control. Chatsworth Products, Inc. also cannot guarantee that changes in equipment

made by other manufacturers, and referred to in this manual, will not affect the applicability of the

information in this manual.

First Edition, version 1.04, January 2006

Written and produced by Chatsworth Products, Inc.

Please address comments on this publication to:

RIM-600 Product Manager

Chatsworth Products, Inc.

9353 Winnetka Avenue

Chatsworth, CA 91311

800-834-4969

Fax: 252-514-2977

RIM-600 is a registered trademark of Chatsworth Products, Inc.

iii

Important Safety Instructions

Your RIM-600 has been carefully designed to give you years of safe, reliable performance. As with all

electrical equipment, however, there are a few basic precautions you should take to avoid hurting your-

self or damaging the unit:

• Read the installation and operating instructions in this manual carefully. Be sure to save it for

future reference.

• Read and follow all warning and instruction labels on the product itself.

• To protect the RIM-600 from overheating, make sure all openings on the unit are not blocked. Do

not place on or near a heat source, such as a radiator or heat register.

• Do not use your RIM-600 near water, or spill liquid of any kind into it.

• Be certain that your power source matches the rating in the specifications of this manual. If you’re

not sure of the type of power supply to your facility, consult your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this product where the cord will be

abused by persons walking on it.

• Do not overload wall outlets and extension cords, as this can result in the risk of fire or electric

shock.

• To reduce the risk of electric shock, the power supply cord for the RIM-600 Host must have a

grounded lug.

• The RIM-600 Host power supply cord must be used in accordance with applicable UL/CSA/

EN/IEC standards, and must meet the conductor size and length terms of the above-mentioned

standards.

• All RIM-600 components (Host, Node, PowerGate and PowerGate2) must be plugged into a

grounded outlet.

• Never push objects of any kind into this product through ventilation holes as they may touch

dangerous voltage points or short out parts that could result in a risk of fire or electric shock.

• To reduce the risk of electric shock, do not disassemble this product, but return it to CPI Customer

Service, or another approved repair facility, when any service or repair work is required. Opening

or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly

can cause electric shock when the unit is subsequently used.

• If anything happens that indicates that your RIM-600 is not working properly or has been

damaged, unplug it immediately and follow the procedures in the manual for having it serviced.

Return the unit for servicing under the following conditions:

1. The power cord or plug is frayed or damaged.

2. Liquid has been spilled into the product or it has been exposed to water.

3. The unit has been dropped, or the enclosure is damaged.

4. The unit doesn’t function normally when you’re following the operating instructions.

• Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a

remote risk of electric shock from lightning.

iii

RIM-600 Manual

• To reduce the risk of fire or injury to persons, read and follow these instructions:

1. Use only the specified type and size batteries.

2. Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for

possible special disposal instructions.

3. Do not open or mutilate batteries. Released electrolyte is corrosive and may cause

damage to the eyes or skin. It may be toxic if swallowed.

4. Exercise care in handling batteries in order not to short the battery with conducting

materials such as rings, bracelets, and keys. The battery or conductor may overheat and

cause burns.

5. Remove main power and telephone connections before replacing the battery.

FCC Requirements

Part 68: The Chatsworth RIM-600 complies with 47 CFR, Part 68 of the rules. On the back of the

unit there is a label that contains, among other information, the Certification Number and the Ringer

Equivalence Number (REN) for this equipment. You must, upon request, provide this information to

your local telephone company.

The REN is useful to determine the quantity of devices that you may connect to your telephone line

and still have all of those devices ring when your telephone number is called. In most, but not all areas,

the sum of the REN’s of all devices connected to one line should not exceed five (5.0). To be certain of

the number of devices that you may connect to your line, you may want to contact your local telephone

company to determine the maximum REN for your calling area.

The applicable certification jack USOC for this equipment is: RJ11C. The facility interface code (FIC)

for this equipment is: 02LS2.

A compliant telephone cord and modular plug are provided with equipment. This equipment is

designated to be connected to the telephone network or premises wiring using a compatible modular

jack which is Part 68 compliant. See Installation Instructions for details.

This equipment may not be used on coin service units provided by the telephone company. Connection

to party lines is subject to state tariffs. Contact the state public utility commission, public service com-

mission or corporation commission for information.

Should the RIM-600 cause harm to the telephone network, the telephone company may discontinue

your service temporarily. If possible, they will notify you in advance. But if advance notice isn’t

practical, the telephone company may temporarily discontinue service without notice and you will be

notified as soon as possible. You will be informed of your right to file a complaint with the FCC. The

telephone company may make changes in its facilities, equipment, operations, or procedures where

such action is reasonably required in the operation of its business and is not inconsistent with the rules

and regulations of the FCC that could affect the proper functioning of your equipment. If they do, you

will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.

If you experience trouble with the Chatsworth RIM-600, or you need information on obtaining service

or repairs, please contact:

Chatsworth Products, Inc.

701 Industrial Drive

New Bern, NC 28562

800-834-4969

Fax: 252-514-2977

If the equipment is causing harm to the telephone network, the telephone company may ask that you

disconnect this equipment from the network until the problem has been corrected or until you are sure

that the equipment is not malfunctioning.

Part 15: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

Telephone Consumer Protection Act (Host only)

The FCC Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a com-

puter or other electronic device, including FAX machines, to send a message unless such message con-

tains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission,

the date and time it is sent and an identification of the business or other entity, or other individual send-

ing the message, and the telephone number of the sending machine or such business, other entity, or

individual. (The telephone number provided may not be a 900 number or any other number for which

charges exceed local or long-distance transmission charges.)

To comply with this law, you must enter the following information into your RIM-600:

• Date and Time as described in the Unit Properties section of the Software Manual.

• Name and telephone number to identify the source of the FAX transmission, as shown in the Unit

Properties section of the Software Manual.

General Requirements for all Automatic Dialers (Host only)

When programming emergency numbers and (or) making test calls to emergency numbers:

1. Remain on the line and briefly explain to the dispatcher the reason for the call.

2. Perform such activities in the off-peak hours, such as early morning or late evenings.

Canadian Department of Communications Statement (Host only)

Notice: The Canadian Department of Communications label identifies certified equipment. This cer-

tification means that the equipment meets certain telecommunications network protective operational

and safety requirements. The Department does not guarantee the equipment will operate to the user’s

satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facili-

ties of the local telecommunications company. The equipment must also be installed using an accept-

able method of connection. In some cases, the company’s inside wiring associated with a single line

individual service may be extended by means of a certified connector assembly (telephone extension

cord). The customer should be aware that compliance with the above conditions may not prevent deg-

radation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility des-

ignated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to request the user to disconnect the

equipment.

RIM-600 Manual

Users should ensure for their own protection that the electrical ground connections of the power utility,

telephone lines and internal metallic water pipe system, if present, are connected together. This precau-

tion may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but should contact the

appropriate electric inspection authority, or electrician, as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device denotes the percentage of the

total load to be connected to a telephone loop which is used by the device to prevent overloading. The

termination on a loop may consist of any combination of devices subject only to the requirement that

the total of the Ringer Equivalence Numbers of all the devices does not exceed 5.0. For RIM-600, the

Ringer Equivalence Number is 0.3.

The following Copyright applies to the Graphing features of the RIM-600 web page.

Laboratory. Funded under Grant P41-RR02188 by the National Institutes of Health.

based in part on the work of the Independent JPEG Group.

Permission has been granted to copy, distribute and modify gd in any context without fee, including a

commercial application, provided that this notice is present in user-accessible supporting documenta-

tion.

This does not affect your ownership of the derived work itself, and the intent is to assure proper credit

for the authors of gd, not to interfere with your productive use of gd. If you have questions, ask.

“Derived works” includes all programs that utilize the library. Credit must be given in user-accessible

documentation.

This software is provided “AS IS.” The copyright holders disclaim all warranties, either express or

implied, including but not limited to implied warranties of merchantability and fitness for a particular

purpose, with respect to this code and accompanying documentation.

Although their code does not appear in gd 2.0.4, the authors wish to thank David Koblas, David

Rowley, and Hutchison Avenue Software Corporation for their prior contributions.

vii

1 YEAR LIMITED WARRANTY

PLEASE READ THIS WARRANTY CAREFULLY BEFORE USING THE PRODUCT.

THIS LIMITED WARRANTY CONTAINS CHATSWORTH PRODUCTS’ STANDARD TERMS AND CONDITIONS. WHERE PERMITTED

BY THE APPLICABLE LAW, BY KEEPING YOUR CHATSWORTH PRODUCT BEYOND THIRTY (30) DAYS AFTER THE DATE OF

DELIVERY, YOU FULLY ACCEPT THE TERMS AND CONDITIONS SET FORTH IN THIS LIMITED WARRANTY.

IN ADDITION, WHERE PERMITTED BY THE APPLICABLE LAW, YOUR INSTALLATION AND/OR USE OF THE PRODUCT

CONSTITUTES FULL ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LIMITED WARRANTY (HEREINAFTER REFERRED

TO AS "LIMITED WARRANTY OR WARRANTY"). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS WARRANTY,

INCLUDING ANY LIMITATIONS OF WARRANTY, INDEMNIFICATION TERMS OR LIMITATION OF LIABILITY, THEN YOU SHOULD

NOT USE THE PRODUCT AND SHOULD RETURN IT TO THE SELLER FOR A REFUND OF THE PURCHASE PRICE. THE LAW

MAY VARY BY JURISDICTION AS TO THE APPLICABILITY OF YOUR INSTALLATION OR USE ACTUALLY CONSTITUTING

ACCEPTANCE OF THE TERMS AND CONDITIONS HEREIN AND AS TO THE APPLICABILITY OF ANY LIMITATION OF WARRANTY,

INDEMNIFICATION TERMS OR LIMITATIONS OF LIABILITY.

1. WARRANTOR: In this Warranty, Warrantor shall mean "Dealer, Distributor, and/or Manufacturer."

2. ELEMENTS OF WARRANTY: This Product is warranted to be free from defects in materials and craftsmanship with only the limi-

tations and exclusions set out below.

3. WARRANTY AND REMEDY: One-Year Warranty — In the event that the Product does not conform to this warranty at any time

during the time of one year from the date of installation or initial use, provided that this period shall not exceed 18 months from

the original date of shipment from factory.

This warranty shall terminate and be of no further effect at the time the product is: (1) damaged by extraneous cause such as

fire, water, lightning, etc. or not maintained as reasonable and necessary; or (2) modified; or (3) improperly installed; or (4) mis-

used; or (5) repaired or serviced by someone other than Warrantors’ authorized personnel or someone expressly authorized by

Warrantor’s to make such service or repairs; (6) used in a manner or purpose for which the product was not intended; or (7) sold

by original purchaser.

LIMITED WARRANTY, LIMITATION OF DAMAGES AND DISCLAIMER OF LIABILITY FOR DAMAGES: THE WARRANTOR’S

OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT THE WARRANTOR’S

OPTION AS TO REPAIR OR REPLACEMENT. IN NO EVENT SHALL WARRANTORS BE LIABLE OR RESPONSIBLE FOR PAYMENT

OF ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL AND/OR PUNITIVE DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED

TO ANY LABOR COSTS, PRODUCT COSTS, LOST REVENUE, BUSINESS INTERRUTPION LOSSES, LOST PROFITS, LOSS OF

BUSINESS, LOSS OF DATA OR INFORMATION, OR FINANCIAL LOSS, FOR CLAIMS OF ANY NATURE, INCLUDING BUT NOT

LIMITED TO CLAIMS IN CONTRACT, BREACH OF WARRANTY OR TORT, AND WHETHER OR NOT CAUSED BY WARRANTORS’

NEGLIGENCE. IN THE EVENT THAT IT IS DETERMINED IN ANY ADJUDICATION THAT THE LIMITED WARRANTIES OF REPAIR

OR REPLACEMENT ARE INAPPLICABLE, THEN THE PURCHASER’S SOLE REMEDY SHALL BE PAYMENT TO THE PURCHASER

OF THE ORIGINAL COST OF THE PRODUCT, AND IN NO EVENT SHALL WARRANTORS BE LIABLE OR RESPONSIBLE FOR

PAYMENT OF ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL AND/OR PUNITIVE DAMAGES OF ANY KIND, INCLUDING BUT NOT

LIMITED TO ANY LOST REVENUE, BUSINESS INTERRUTPION LOSSES, LOST PROFITS, LOSS OF BUSINESS, LOSS OF DATA OR

INFORMATION, OR FINANCIAL LOSS, FOR CLAIMS OF ANY NATURE, INCLUDING BUT NOT LIMITED TO CLAIMS IN CONTRACT,

BREACH OF WARRANTY OR TORT, AND WHETHER OR NOT CAUSED BY WARRANTORS’ NEGLIGENCE.

WITHOUT WAIVING ANY PROVISION IN THIS LIMITED WARRANTY, IF A CIRCUMSTANCE ARISES WHERE WARRANTORS ARE

FOUND TO BE LIABLE FOR ANY LOSS OR DAMAGE ARISING OUT OF MISTAKES, NEGLIGENCE, OMISSIONS, INTERRUPTIONS,

DELAYS, ERRORS OR DEFECTS IN WARRANTORS’ PRODUCTS OR SERVICES, SUCH LIABILITY SHALL NOT EXCEED THE TOTAL

AMOUNT PAID BY THE CUSTOMER FOR WARRANTORS’ PRODUCT AND SERVICES OR $250.00 US DOLLARS, WHICHEVER IS

GREATER. YOU HEREBY RELEASE WARRANTORS FROM ANY AND ALL OBLIGATIONS, LIABILITIES AND CLAIMS IN EXCESS OF

THIS LIMITATION.

INDEMNIFICATION AND COVENANT NOT TO SUE: YOU WILL INDEMNIFY, DEFEND AND HOLD HARMLESS WARRANTORS,

THEIR OWNERS, DIRECTORS, OFFICERS, EMPLOYEES, AGENTS, SUPPLIERS OR AFFILIATED COMPANIES, AGAINST ANY

AND ALL CLAIMS, DEMANDS OR ACTIONS BASED UPON ANY LOSSES, LIABILITIES, DAMAGES OR COSTS, INCLUDING BUT

NOT LIMITED TO DAMAGES THAT ARE DIRECT OR INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL, AND INCLUDING

ATTORNEYS FEES AND LEGAL COSTS, THAT MAY RESULT FROM THE INSTALLATION, OPERATION, USE OF, OR INABILITY TO

USE WARRANTORS’ PRODUCTS AND SERVICES, OR FROM THE FAILURE OF THE WARRANTORS’ SYSTEM TO REPORT A GIVEN

EVENT OR CONDITION, WHETHER OR NOT CAUSED BY WARRANTORS’ NEGLIGENCE.

RIM-600 Manual

viii

YOU AGREE TO RELEASE, WAIVE, DISCHARGE AND COVENANT NOT TO SUE WARRANTORS, THEIR OWNERS, DIRECTORS,

OFFICERS, EMPLOYEES, AGENTS, SUPPLIERS OR AFFILIATED COMPANIES, FOR ANY AND ALL LIABILITIES POTENTIALLY

ARISING FROM ANY CLAIM, DEMAND OR ACTION BASED UPON ANY LOSSES, LIABILITIES, DAMAGES OR COSTS, INCLUDING

BUT NOT LIMITED TO DAMAGES THAT ARE DIRECT OR INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL, AND INCLUDING

ATTORNEYS FEES AND LEGAL COSTS, THAT MAY RESULT FROM THE INSTALLATION, OPERATION, USE OF, OR INABILITY TO

USE WARRANTORS’ PRODUCTS AND SERVICES, OR FROM THE FAILURE OF THE WARRANTORS’ SYSTEM TO REPORT A GIVEN

EVENT OR CONDITION, WHETHER OR NOT CAUSED BY WARRANTORS’ NEGLIGENCE, EXCEPT AS NECESSARY TO ENFORCE

THE EXPRESS TERMS OF THIS LIMITED WARRANTY.

EXCLUSIVE WARRANTY: THE LIMITED WARRANTY OR WARRANTIES DESCRIBED HEREIN CONSTITUTE THE SOLE WARRANTY

OR WARRANTIES TO THE PURCHASER. ALL IMPLIED WARRANTIES ARE EXPRESSLY DISCLAIMED, INCLUDING: THE

WARRANTY OF MERCHANTIBILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR USE AND THE WARRANTY OF

FITNESS FOR A PARTICULAR PURPOSE AND THE WARRANTY OF NON-INFRINGEMENT AND/OR ANY WARRANTY ARISING

FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

It must be clear that the Warrantors are not insuring your premises or business or guaranteeing that there will not be damage to

your person or property or business if you use this Product. You should maintain insurance coverage sufficient to provide com-

pensation for any loss, damage, or expense that may arise in connection with the use of products or services, even if caused by

Warrantors’ negligence. The warrantors assume no liability for installation of the Product and/or interruptions of the service due

to strikes, riots, floods, fire, and/or any cause beyond Seller’s control, further subject to the limitations expressed in any License

Agreement or other Agreement provided by Warrantors to purchaser.

The agreement between the Warrantors and the Purchaser, including but not limited to the terms and conditions herein shall not

be governed by the Convention for the International Sale of Goods. Where applicable, the Uniform Commercial Code as adopted

by the State of Delaware shall apply.

4. RETURNS AND REPAIRS: No products or part thereof shall be returned to CPI unless the customer first obtains a Customer

Return Authorization (CRA) number from a CPI customer service representative. This number must appear clearly and promi-

nently on all shipping containers. Containers without the labels will not be accepted.

Products returned for warranty repair shall be shipped prepaid to CPI. Said products are subject to handling charges if no defects

are found during inspection. All products returned to CPI shall be packaged to prevent damage during shipment. Any damage

that occurs during shipment is the responsibility of the customer and the shipping company. CPI will send back repaired products

freight prepaid.

If CPI finds that products returned for repair, whether in or out of warranty, have failed due to misuse or negligence or have com-

ponents removed, CPI will repair the product in accordance with “out-of-warranty” charges. If CPI finds products, in or out of

warranty, to be damaged beyond repair, the customer can choose to have the product sent back “as is” or scrapped by CPI.

5. LEGAL REMEDIES AND DISCLAIMER: Some jurisdictions may not allow, or may place limits upon, the exclusion and/or

limitation of implied warranties, incidental damages and/or consequential damages for some types of goods or products sold to

consumers and/or the use of indemnification terms. Thus, the exclusions, indemnification terms and limitations set out above

may not apply, or may be limited in their application, to you. If the implied warranties can not be excluded, and the applicable law

permits limiting the duration of implied warranties, then the implied warranties herein are to be limited to the same duration as

the applicable written warranty or warranties herein. The warranty or warranties herein may give you specific legal rights that will

depend upon the applicable law. You may also have other legal rights depending upon the law in your jurisdiction.

6. CHOICE OF FORUM AND CHOICE OF LAW: In the event that a dispute arises out of or in connection with this Limited

Warranty, then any claims or suits of any kind concerning such disputes shall only and exclusively be brought in either the Court

of Los Angeles County, California or the United States District Court in Los Angeles, California.

Regardless of the place of contracting or performance, this Limited Warranty and all questions relating to its validity, interpretation,

performance and enforcement shall be governed by and construed in accordance with the laws of the State of Delaware, without

regard to the principles of conflicts of law.

Effective date 01/10/2006

Chatsworth Products, Inc.

701 Industrial Drive

New Bern, NC 28562

800-834-4969

Fax: 252-514-2977

Table of Contents

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

FCC Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Telephone Consumer Protection Act (Host only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

General Requirements for all Automatic Dialers (Host only). . . . . . . . . . . . . . . . . . . . . . . . .v

Canadian Department of Communications Statement (Host only) . . . . . . . . . . . . . . . . . . .v

1 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii

Chapter 1: Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

HOST INSTALLATION and CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Serial Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

RJ-45 10/100BASE-T Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Phone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Sensor Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Sensor Input LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AC Power and Battery LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Microphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ON/OFF Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Operating Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Rack Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Wall Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Power On Self Test (POST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Local Configuration Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Battery Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Service life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Replacing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

RIM-600 Manual

RIM-600 Host Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Operating Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Communications Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Environmental Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

NODE INSTALLATION & CONFIGURATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Sensor Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

RJ-45 10/100BASE-T Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Serial Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ON/OFF Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Battery Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Parts Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Operating Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Rack Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Wall Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Connecting Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Local Configuration Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Node Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Operating Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Communications Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Environmental Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 2: RIM-600 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

RIM-600 Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Install Units and Configure Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Install Software and Log In to Host. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Default Username and Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Configure the Unit Properties for the Host and Node(s) . . . . . . . . . . . . . . . . . . . . . . . . 40

Configure Input Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Connect Environmental Sensors to Host and Node(s) . . . . . . . . . . . . . . . . . . . . . . . . . 40

Configure User Profiles and Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Configure IP Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Inhaltsverzeichnis

Andere Chatsworth Products Netzwerk-Hardware Handbücher

Chatsworth Products

Chatsworth Products RIM-750 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung