Chauvet DJ GOBOZAP Bedienungsanleitung

GOBOZAP

User Manual

Table of Contents

Gobozap User Manual Rev. 1

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Unpacking Instructions.................................................................................. 1

Claims ................................................................................................................ 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

Disclaimer ..................................................................................................... 1

Safety Notes.................................................................................................. 2

2. Introduction ................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 3

3. Setup ........................................................................................... 4

AC Power ........................................................................................................... 4

Fuse Replacement .................................................................................................. 4

Power linking...................................................................................................... 4

Mounting ....................................................................................................... 5

Orientation.......................................................................................................... 5

Rigging ............................................................................................................... 5

4. Operation .................................................................................... 6

Control Panel Operation................................................................................ 6

Menu Map ..................................................................................................... 6

DMX Personality and Starting Address.............................................................. 6

DMX Channel Assignments and Values ....................................................... 7

Gobos................................................................................................................. 9

Configuration (Standalone) ........................................................................... 10

Automatic Programs........................................................................................... 10

Auto-Program Speed ......................................................................................... 10

Sound-Active Mode............................................................................................ 10

Sound-Sensitivity ............................................................................................... 10

Motor Rotation.................................................................................................... 10

IRC-6 Infrared Remote Control ..................................................................... 11

IRC-6 Operation ................................................................................................. 11

Master/Slave Mode ....................................................................................... 12

5. Maintenance................................................................................ 13

Product Maintenance .................................................................................... 13

6. Technical Specifications ........................................................... 14

Returns............................................................................................ 15

Page 1 of 17

Gobozap User Manual Rev. 1

Before You Begin

1. Before You Begin

What Is Included

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision; however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com.

The works of authorship contained in this manual, including, but not limited to, all designs, texts, and

images are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

CHAUVET, the Chauvet logo, and Gobozap are registered trademarks or trademarks of Chauvet & Sons

LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and

product names and logos referred to herein may be trademarks of their respective companies.

• Gobozap

•Powercord

• Hanging bracket

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

ON A value to be entered or selected

Symbol Meaning

Electrical warning. Not following these instructions may cause electrical damage to

the product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Page 2 of 17

Before You Begin

Gobozap User Manual Rev. 1

Safety Notes

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Always disconnect the product from the power source before cleaning or replacing the fuse.

• Avoid direct eye exposure to the light source while the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect the product from power cord by pulling or tugging on the cord.

• If mounting the product overhead, always secure to a fastening device using a safety cable.

• Make sure there are no flammable materials close to the product when operating.

• Do not touch the product’s housing when operating because it may be very hot.

• Do not charge the battery of the product in a closed case or container.

• Always make sure that the voltage of the outlet to which you are connecting the product is

within the range stated on the decal or rear panel of the product.

• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the

product to rain or moisture.

• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from

adjacent surfaces.

• Be sure that no ventilation slots on the product’s housing are blocked.

• Never connect the product to a dimmer.

• Make sure to replace the fuse with another of the same type and rating.

• Never carry the product from the power cord or any moving part. Always use the hanging/

mounting bracket.

• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at

higher temperatures.

• In the event of a serious operating problem, stop using the product immediately.

• Never try to repair the product. Repairs carried out by unskilled people can lead to damage

or malfunction. Please contact the nearest authorized technical assistance center.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Keep this User Manual for future use. If you sell the product to someone else, be sure that

they also receive this document.

Page 3 of 17

Gobozap User Manual Rev. 1

Introduction

2. Introduction

Product Overview

Product Dimensions

Lens

DMX in/out

Menu buttons

Gobo

wheel

LED display

Fan (2x)

Power in/out

Fuse holder

IR sensor

6.1 in

155 mm

5.1 in

135 mm

19.1 in

485 mm

Page 4 of 17

Setup

Gobozap User Manual Rev. 1

3. Setup

AC Power

The Gobozap has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240

VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring),

use the current value listed on the label affixed to the product’s back panel, or refer to the product’s

specifications chart. The listed current rating indicates the product’s average current draw under normal

conditions.

Fuse Replacement

1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

2. Pry the fuse holder out of the housing.

3. Remove the blown fuse from the holder, and replace with a fuse of the exact same type and rating

(F 3 A, 250 V).

4. Insert the fuse holder back in place and reconnect power.

Power linking

The product provides power linking via the outlet located in the back of the product. Please see the

diagram below for further explanation.

Power Linking Diagram

• Always connect the product to a protected circuit (e.g., a circuit breaker or

fuse). Make sure the product has an appropriate electrical ground to avoid the

risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, completely

disconnect the product from power via breaker or by unplugging it during

periods of non-use.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

Disconnect the multi-charger from the power outlet before replacing the fuse.

You can power link up to 6 Gobozap products on 230 VAC.

The power linking diagram corresponds to the U.K. version of the product ONLY! If using

the product in other markets, you must consult with the local Chauvet distributor, as

power-linking connectors and requirements may differ in your country or region.

Safety cap

Spare fuse holder

(inside safety cap)

Installed fuse

(held by plastic clip)

Additional

products

Page 5 of 17

Gobozap User Manual Rev. 1

Setup

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The Gobozap may be mounted in any position; however, make sure adequate ventilation is provided

around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for

maintenance and programming purposes.

• Make sure adequate ventilation is provided around the product.

• Make sure that the structure or surface onto which you are mounting the product can support the

product’s weight (see the Technical Specifications).

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, such as an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• When power linking multiple products, mount the products close enough for power-linking cables to reach.

• The bracket adjustment knob allows for directional adjustment when aiming the product to the desired

angle. Only loosen or tighten the bracket knob manually. Using tools could damage the knob.

Mounting Diagram

Mounting bracket

Safety cable

Mounting clamp

Page 6 of 17

Operation

Gobozap User Manual Rev. 1

4. Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to

the Product Overview to see the button locations on the control panel.

Menu Map

DMX Personality and Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX

mode uses. If you choose a starting address that is too high, you could restrict the access to some of the

product’s channels.

The Gobozap uses up to 12 DMX channels, which defines the highest configurable address as 502.

If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.

To select the starting address, do the following:

1. Press<MENU> repeatedly until 2Ch, 7Ch, or 11Ch shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select the starting address, from A001–512.

4. Press <ENTER>.

Button Function

<MENU> Press to find an operation mode or to back out of the current menu option

<UP> Press to scroll up the list of options or to find a higher value

<DOWN> Press to scroll down the list of options or to find a lower value

<ENTER> Press to activate a menu option or a selected value

Mode Programming Levels Description

Address

2Ch

A001–512 Sets the DMX personality7Ch

11Ch

Auto programs P-- auto Auto programs

Auto speed S-- 001–100 Auto programs speed

Sound-active

mode Snd BO Blackout when no sound

SLOW Rotate slow when no sound

Sound sensitivity SENV 001–100 Adjusts sound sensitivity

Infrared mode SET on Turns infrared on or off

off

Master/Slave

mode SLV SLV1 Copies the master unit

SLV2 Slave unit for coordinated show

Motor mot

on Reverses motor rotation

off Normal motor rotation

000–100

Overrides mirror dish rotation speed for auto/

sound only. If this is set to 000, this setting has no

effect on anything. When set to 050, the mirror

dish or gobo will rotate at 50% speed, and the

auto or sound program speed control will adjust

the colors and gobos only.

Page 7 of 17

Gobozap User Manual Rev. 1

Operation

DMX Channel Assignments and Values

2Ch 7Ch 11Ch Function Value Percent/Setting

1 1 1 Auto programs 001 127 Auto mode

128 255 Sound mode

222

Auto speed 000 255 Slow to fast

(activates when Channel 1 is on auto mode)

Sound

sensitivity 000 255 0–100%

(activates when Channel 1 is on sound mode)

- 3 3 Dimmer 1 000 255 0–100%

- - 4 Dimmer 2 000 255 0–100%

- 4 5 Shutter 1 000 255 Strobe speed, slow to fast

- - 6 Shutter 2 000 255 Strobe speed, slow to fast

- 5 7 Colour wheel 1

001 004 White

005 009 Red

010 014 Green

015 019 Blue

020 024 Yellow

025 029 Amber

030 034 Pink

035 039 Lime green

040 044 Light blue

045 049 Magenta

050 054 Cyan

055 059 Orange

060 064 UV

065 069 Dark pink

070 074 Dark pink + white

075 079 UV + dark pink

080 084 Orange + UV

085 089 Cyan + orange

090 094 Magenta + cyan

095 099 Light blue + magenta

100 104 Lime green + light blue

105 109 Pink + lime green

110 114 Amber + pink

115 119 Yellow + amber

120 124 Blue + yellow

125 129 Green + blue

130 134 Red + green

135 139 White + red

140 197 Clockwise scroll, fast to slow

198 255 Counterclockwise scroll, slow to fast

Page 8 of 17

Operation

Gobozap User Manual Rev. 1

- - 8 Colour wheel 2

001 004 White

005 009 Red

010 014 Green

015 019 Blue

020 024 Yellow

025 029 Amber

030 034 Pink

035 039 Lime green

040 044 Light blue

045 049 Magenta

050 054 Cyan

055 059 Orange

060 064 UV

065 069 Dark pink

070 074 Dark pink + white

075 079 UV + dark pink

080 084 Orange + UV

085 089 Cyan + orange

090 094 Magenta + cyan

095 099 Light blue + magenta

100 104 Lime green + light blue

105 109 Pink + lime green

110 114 Amber + pink

115 119 Yellow + amber

120 124 Blue + yellow

125 129 Green + blue

130 134 Red + green

135 139 White + red

140 197 Clockwise scroll, fast to slow

198 255 Counterclockwise scroll, slow to fast

-69

Gobo wheel 1

(see Gobos)

001 009 Gobo 1

010 019 Gobo 2

020 029 Gobo 3

030 039 Gobo 4

040 049 Gobo 5

050 059 Gobo 6

060 069 Gobo 7

070 079 Gobo 8

080 089 Gobo 9

090 099 Gobo 10

100 109 Gobo 11

110 119 Gobo 12

120 129 Gobo 13

130 139 Gobo 14

140 197 Clockwise scroll, fast to slow

198 255 Counterclockwise scroll, slow to fast

2Ch 7Ch 11Ch Function Value Percent/Setting

Inhaltsverzeichnis

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ GigBAR MOVE ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 180 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Wave IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ MotionOrb Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Gobo IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4Bar Quad Bedienungsanleitung

Chauvet DJ

Chauvet DJ Pinspot Bar Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORbar SMD Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR LT BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Kinta HP Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 480 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Wedge Quad Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4 BAR LT QuadBT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ WASH FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband H9 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband T3 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Cumulus HP Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze X2 Q6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Obey 40 D-Fi 2.4 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 1000 Bedienungsanleitung

Chauvet DJ

Chauvet DJ INTIMIDATOR SPOT 360X IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q6BT ILS Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung