Chauvet DJ SlimBEAM QUAD IRC Bedienungsanleitung

Quick Reference Guide

SlimBEAM QUAD IRC QRG EN

About this

Guide The SlimBEAM QUAD IRC

Quick Reference Guide (QRG) has basic product

information such as mounting, menu options, and DMX values.

For more

information, download the User Manual from the Chauvet website

www.chauvetlighting.com.

Disclaimer

The information and specifications contained in this QRG

are subject to change

without notice.

Safety Notes

These Safety Notes include important information about installation, use, and

maintenance.

•Always connect the product to a grounded circuit to avoid the risk of

electrocution.

•Make sure the power cord is not crimped or damaged.

•Always disconnect the product from the power source before cleaning it or

replacing the fuse.

•Never disconnect the product from the power source by pulling or tugging

on the cord.

•If mounting the product overhead, make sure there is adequate support for

the product’s weight, and always secure the product using a safety cable.

•Make sure there are no flammable materials close to the product when it is

operating.

•Avoid direct eye exposure to the light source while the product is on.

•Do not touch the product’s housing when the product is operating because

the housing can be very hot.

•The product is not intended for permanent installation.

•The product is for indoor use only! It is rated at IP20.

•Do not expose the product to rain or moisture.

•Install the product in a location with adequate ventilation, and leave at least

20 in (50 cm) between the product and adjacent surfaces.

•Do not operate the product at a maximum ambient temperature higher than

104 °F (40 °C).

•Make sure that the voltage of the power source used for the product is within

the range stated on the sticker or the rear panel of the product.

•Never connect the product to a dimmer or a rheostat.

•Replace the product’s fuse only with another fuse of the same type and

rating.

•Never carry the product by the power cord or any moving part.

•In the event of a serious operating problem, stop using the product

immediately.

•Never open or repair the product. Repairs carried out by unskilled people

can lead to damage or malfunction.

•Contact the nearest authorized technical assistance center if the product

malfunctions.

•To eliminate unnecessary wear and improve the lifespan, during periods of

non-use completely disconnect the product from the power via the breaker

or by unplugging it.

Contact

From outside the U.S., UK, Ireland, or Mexico, contact the distributor of record to

request support or return a product. From inside the U.S., UK, Ireland, or Mexico,

use the information in Contact Us at the end of this QRG.

SlimBEAM QUAD IRC QRG EN

What is

Included

•SlimBEAM QUAD IRC

•

Power Cord

•Warranty card

•Quick Reference Guide

To Begin

Carefully unpack the SlimBEAM QUAD IRC and check that all the parts are in the

package, and are in good condition.

If the box, or any of the contents, appear damaged from shipping, or show signs of

mishandling, save all packaging and file a claim with the carrier immediately. Do

not notify Chauvet. Failure to report damage to the carrier immediately,

or failure

to have all packaging available for inspection, could invalidate your claim.

For other issues, such as missing components or parts, damage not related to

shipping, or concealed damage, file a claim with Chauvet

within 7 days of

delivery. For information on contacting Chauvet, see the Contact Us section of this

QRG.

Description

The SlimBEAM QUAD IRC is an all-in-one LED powered wall accent and effect

light that can be used standalone or to add excitement to your existing

up-lighting. Create unique wall art effects by combining multiple units, and trigger

eye-catching effects with the built-

in automated programs via Master/Slave, DMX

mode, or the optional IRC-6 remote control. With a 180° tilt range, the possibilities

are endless.

Overview

Infrared Sensor

Display

DMX In

DMX Out

Buttons

Power In

Power Out

Fuse

Holder

Microphone

Adjustment

Knobs

Safety

Loop

SlimBEAM QUAD IRC QRG EN

AC Power

SlimBEAM QUAD IRC has an auto-ranging

power supply that works with an

input voltage range of 100 to 240 VAC, 50/60 Hz.

Power Linking

For the maximum number of SlimBEAM QUAD IRC products

that you can power

link at each voltage, see the User Manual or the sticker on the product.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

4. Remove the blown fuse from the clip on the front of the safety cap and replace

with a fuse of the exact same type and rating.

5. Re-insert the fuse holder and reconnect power.

IRC-6 (Infrared

Remote Control)

The SlimBEAM QUAD IRC can be operated with the CHAUVET IRC-

6. For

more information about the IRC-6, download instructions for the IRC-

6 or the

SlimBEAM QUAD IRC User Manual from http://www.chauvetlighting.com.

SlimBEAM™ QUAD IRC Zones for DMX Control

SlimBEAM QUAD IRC QRG EN

Mounting

Before mounting this product, read the Safety Notes.

Use at least two mounting

points and one safety cable per product.

Make sure the mounting clamps are

capable of supporting the weight of the product. For the Chauvet

line of mounting

clamps, go to https://www.chauvetdj.com/products/category/accessories/.

Mounting Diagram

Safety Cable

(such as CH-05

from Chauvet)

Mounting Clamp

(such as the CLP-15N

clamp from Chauvet)

Threaded

Mounting

Hole

Size M12

Rubber

Feet x4

(for floor

mounting)

SlimBEAM QUAD IRC QRG EN

Control Panel

Description

Button

Function

<MENU>

Cycles through main menu functions or exits from a submenu

<UP>

Navigates upwards through a list or increases the numeric value of a

setting

<DOWN>

Navigates downwards through a list or decreases the numeric value

of a setting

<ENTER>

Enters into a menu or sets the currently displayed value

Menu Options

Main Function

Programming Levels

Description

DMX Personality and

Starting Address

4-CH

d 1–d512 Selects DMX personality and DMX starting

value

9-CH

16CH

Static Colors

C--

C 1–C 15

Selects 1 of 15 static colors

Auto Programs

P--

P 1–P 10

Selects 1 of 10 auto program

Program Speed

S--

S 1–S100

Sets auto program speed (slow to fast)

Sound-Active

Snd

Selects Sound-Active mode

Sound Sensitivity

SenS

u 0–u100

Sets the sound sensitivity

Custom Color Mixing U--

r 0–r255

Red (0–100%)

g0–g255

Green (0–100%)

b0–b255

Blue (0–100%)

A 0–A255

Amber (0–100%)

Dimmer dim

Off

Selects the dimmer mode

dim1

dim2

dim3

Infrared SET

Turns infrared on or off

Off

DMX Linking

The SlimBEAM QUAD IRC

works with a DMX controller. Information about

configuring SlimBEAM QUAD IRC for DMX operation is in the User

Manual,

which is available from the Chauvet website http://www.chauvetlighting.com

Information about DMX is in the DMX Primer, which is available from the

Chauvet website https://www.chauvetdj.com/downloads/.

Starting Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 497.

Master/Slave

Connection

The SlimBEAM QUAD IRC works in Master/Slave mode. Information

about

configuring SlimBEAM QUAD IRC

for Master/Slave operation is in the

User Manual, which is available from the Chauvet

website

http://www.chauvetlighting.com.

SlimBEAM QUAD IRC QRG EN

DMX Values

4-CH

Channel

Function

Value

Percent/Setting

Red

000

255

0 to 100%

Green

000

255

0 to 100%

Blue

000

255

0 to 100%

Amber

000

255

0 to 100%

9-CH

Channel

Function

Value

Percent/Setting

Red

000

255

0 to 100%

Green

000

255

0 to 100%

Blue

000

255

0 to 100%

Amber

000ó255

0 to 100%

5 Color Macros and

Color Temperature

000

010

No function

011

030

R: 100% G: 0–100%, B: 0

031

050

R: 100%–0 G: 100%, B: 0

051

070

R: 0 G: 100% B: 0–100%

071

090

R: 0 G: 100%–0 B: 100%

091

110

R: 0–100% G: 0 B: 100%

111

130

R: 100% G: 0 B: 100%–0

131ó150

R: 100% G: 0–100% B: 0–100%

151ó170

R: 100%–0 G: 100%–0 B: 100%

171

200

R: 100% G: 100% B: 100% A: 100%

201

205

Color temperature 1

206

210

Color temperature 2

211

215

Color temperature 3

216

220

Color temperature 4

221ó225

Color temperature 5

226

230

Color temperature 6

231

235

Color temperature 7

236

240

Color temperature 8

241

245

Color temperature 9

246ó250

Color temperature 10

251

255

Color temperature 11

Strobe

000

010

No function

011

255

Strobe, slow to fast

Program Speed 000ó255

Program speed, slow to fast,

when CH. 7 is 011–230

Sound Senstivity

000

010

Off

011ó255

Sound sensitivity, low to high,

when CH. 7 is 231–255

SlimBEAM QUAD IRC QRG EN

9-CH

Channel

Function

Value

Percent/Setting

7 Auto/Sound

Programs

000

010

No function

011

032

Auto program 1

033

054

Auto program 2

055

076

Auto program 3

077

098

Auto program 4

099

120

Auto program 5

121

142

Auto program 6

143

164

Auto program 7

165

186

Auto program 8

187ó208

Auto program 9

209

230

Auto program 10

231

255

Sound program

Dimmer

000

255

0–100%

9 Dimmer Speed

Mode

000

051

Preset dimmer speed from display menu

052ó101

Dimmer speed mode off

102

152

Dimmer speed mode1 (fast speed)

153

203

Dimmer speed mode2 (middle speed)

204

255

Dimmer speed mode3 (slow speed)

SlimBEAM QUAD IRC QRG EN

16CH

Channel

Function

Value

Percent/Setting

Red 1

000

255

0 to 100%

Green 1

000

255

0 to 100%

Blue 1

000ó255

0 to 100%

Amber 1

000

255

0 to 100%

Red 2

000

255

0 to 100%

Green 2

000

255

0 to 100%

Blue 2

000

255

0 to 100%

Amber 2

000ó255

0 to 100%

Red 3

000

255

0 to 100%

Green 3

000

255

0 to 100%

Blue 3

000

255

0 to 100%

Amber 3

000

255

0 to 100%

Strobe

000

010

No function

011

255

Strobe, slow to fast

Program Speed 000ó255

Program speed, slow to fast,

when CH. 14 is 011–230

Sound Senstivity

000ó010

Off

011

ó255

Sound sensitivity, low to high,

when CH. 14 is 231–255

14 Auto/Sound

Programs

000

010

No function

011ó032

Auto program 1

033

054

Auto program 2

055

076

Auto program 3

077

098

Auto program 4

099

120

Auto program 5

121ó142

Auto program 6

143

164

Auto program 7

165

186

Auto program 8

187

208

Auto program 9

209

230

Auto program 10

231

255

Sound program

Dimmer

000

255

0–100%

16 Dimmer Speed

Mode

000

051

Preset dimmer speed from display menu

052

101

Dimmer speed mode off

102

152

Dimmer speed mode1 (fast speed)

153ó203

Dimmer speed mode2 (middle speed)

204

255

Dimmer speed mode3 (slow speed)

SlimBEAM QUAD IRC GRR ES

Acerca de Esta

Guía

La Guía de Referencia Rápida (GRR) del SlimBEAM QUAD IRC contiene

información básica sobre el producto, como montaje, opciones de menú y

asignaciones DMX. Para más información, descargue el Manual de Usuario del

sitio web de Chauvet http://www.chauvetlighting.com.

Exención de

Responsabilidad La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin previo aviso.

Notas de

Seguridad

Las siguientes notas de seguridad incluyen información importante sobre la

instalación, uso y mantenimiento.

•Conecte siempre el producto a un circuito con toma de tierra.

•Asegúrese de que el cable de alimentación no está retorcido ni estropeado.

•Desconecte siempre el producto de la fuente de alimentación antes de limpiarlo o

cambiar el fusible.

•Nunca desconecte el producto de la fuente de alimentación agarrando o tirando del

cable.

•Si monta el producto en altura, asegúrese de que el soporte es adecuado para el peso

del producto y asegure siempre el producto con un cable de seguridad.

•Asegúrese de que no hay materiales inflamables cerca del producto cuando esté en

funcionamiento.

•Evite la exposición directa de los ojos a la fuente de luz mientras es producto esté

encendido.

•No toque la carcasa del producto cuando el producto esté en funcionamiento,

porque la carcasa puede estar muy caliente.

•El producto no está concebido para una instalación permanente.

•El producto es para uso en interiores solamente. Está clasificado como IP20.

•No exponga elproductoa lluvia o humedad.

•Conecte siempre el producto a una fuente de alimentación que esté en el rango de

tensión especificado en la etiqueta del panel posterior del producto.

•Nunca conecte elproducto a un atenuador o reostato.

•Asegúrese de sustituir el fusible con otro del mismo tipo y categoría.

•Instale siempre el producto en un lugar con ventilación adecuada.

•Deje al menos 20 in (50 cm) entre el producto y superficies adyacentes.

•Asegúresede que no queda bloqueada ninguna ranura de ventilación en la carcasa

del producto.

•No haga funcionar el producto a una temperatura ambiente superior a 104 °F

(40 °C).

•Nunca mueva el producto agarrándolo por el cable de alimentación o por cualquier

parte móvil.

•Utilice siempre la abrazadera de montaje o las asas de transporte para levantar el

producto.

•Si hay un problema grave de funcionamiento, deje de usar el producto

inmediatamente.

•Nunca intente reparar el producto. Las reparaciones llevadas a cabo por personal no

cualificado pueden provocar averías o funcionamiento defectuoso.

•Para evitar un desgaste innecesario y alargar su vida útil, desconecte complemente

el producto de laalimentación, mediante elinterruptor odesenchufándolo, durante

los periodos en los que no se use.

Contacto

From outside the U.S., UK, Ireland, or Mexico, contact the distributor of record

to request support or return a product. From ins

ide the U.S., UK, Ireland, or

Mexico, use the information in Contact Us at the end of this QRG.

Inhaltsverzeichnis

Sprachen:

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ Wash FX Hex Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR Quad ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR LT BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR MOVE ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Beam Q60 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Rotosphere HP Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q6BT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ JAM Pack Silver Bedienungsanleitung

Chauvet DJ

Chauvet DJ JAM Pack Ruby Bedienungsanleitung

Chauvet DJ

Chauvet DJ Festoon Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-160 RGBW Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR T12BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ HURRICANE 1800 FLEX Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane HAZE 1D Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Laser RB Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-100 WW Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORado 1 Tri TOUR Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR MOVE ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Pin Zoom Pack Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q6 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Strip Q6 BT Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung