Chauvet DJ SM-250 Bedienungsanleitung

User Manual

SM-250 User Manual Rev. 5

Edition Notes

The SM-250 User Manual includes a description, safety precautions, installation, programming, operation

and maintenance instructions for the SM-250 as of the release date of this edition.

Trademarks

Chauvet, Chauvet DJ, the Chauvet logo, and SM-250 are registered trademarks or trademarks of Chauvet

& Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other

company and product names and logos referred to herein may be trademarks of their respective

companies.

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com.

Document Revision

This is revision 1 of the SM-250 User Manual. Go to www.chauvetdj.com for the latest version.

SM-250 User Manual Rev. 5

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ............................................................................... 1

What Is Included ........................................................................................... 1

Unpacking Instructions.................................................................................. 1

Claims ................................................................................................................ 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

Safety Notes.................................................................................................. 2

2. Introduction......................................................................................... 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 3

3. Setup.................................................................................................... 4

AC Power...................................................................................................... 4

Fuse Replacement ............................................................................................. 4

Mounting ....................................................................................................... 5

Orientation.......................................................................................................... 5

Rigging ............................................................................................................... 5

4. Operation............................................................................................. 6

Control Panel Operation................................................................................ 6

Menu Map ..................................................................................................... 6

DMX Configuration........................................................................................ 6

Starting Address................................................................................................. 6

DMX Channel Assignments and Values ....................................................... 6

Standalone Configuration.............................................................................. 6

Remote Configuration ................................................................................... 7

Wired Timer Remote Setup................................................................................ 7

Wired Timer Remote Operation............................................................................... 7

Optional Wireless Remote (FC-W)..................................................................... 8

5. Maintenance........................................................................................ 9

Snow Machine Maintenance......................................................................... 9

Storage.......................................................................................................... 9

6. Technical Specifications.................................................................... 10

Warranty & Returns....................................................................................... 11

Before You Begin

SM-250 User Manual Rev. 5

1. Before You Begin

What Is Included

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate a claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

• SM-250

• Power cable

• FC-T Timed Remote Control

• Hanging bracket with mounting hardware

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

ON A value to be entered or selected

Symbol Meaning

Electrical warning. Not following these instructions may cause electrical damage to the

product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

SM-250 User Manual Rev. 5

Before You Begin

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of the SM-250.

■ALWAYS:

♦Connect to a grounded circuit.

♦Connect to operating voltages as specified on the product's spec sticker.

♦Disconnect from power before replacing the fuse.

♦Disconnect from its power source during periods of inactivity.

♦Use a safety cable when suspending overhead.

♦Heed all restrictions and warnings on the spec sticker.

♦Mount in a location with at least 20 in (50 cm) of ventilation.

♦Replace the fuse with the same type and rating.

♦Use Chauvet fluids.

♦Drain the tank before transporting or storing the product.

♦Keep the machine level.

♦Clean the machine after every use.

♦Clean around the product during and after use, as surfaces may become slippery.

■In the event of a serious operating problem, stop using immediately.

■DO NOT:

♦Open this product or attempt any repairs. It contains no user-serviceable parts.

♦Use if the power cable is crimped or damaged.

♦Disconnect by pulling on the power cable.

♦Allow flammable materials close to the product when it is operating.

♦Touch the housing when it is on.

♦Block any ventilation holes/slots in the housing.

♦Connect to a dimmer or rheostat.

♦Carry the product by its power cable.

♦Operate in temperatures higher than 104°F (40°C).

♦Expose to environments that exceed the Ingress Protection (IP) rating.

♦Expose to rain or moisture.

♦Use outdoors.

♦Submerge.

♦Set this product on a flammable surface.

♦Touch the output nozzle. It may be hot for several hours after use.

♦Drink the fluid.

♦Add perfume, alcohol, gasoline or any other chemical to the fluid.

♦Use for space-heating purposes.

♦Overfill.

Keep this User Manual for future use. If the product is sold to someone else, be sure that

they also receive this document.

Introduction

SM-250 User Manual Rev. 5

2. Introduction

Product Overview

Product Dimensions

Fuse holder

Power in

DMX in/out

LED display

Menu buttons

Blower speed switch

Wired controller in

Wireless receiver in

Power switch

Fluid level indicator

Fluid tank

13.9 in

355 mm

13.5 in

344 mm

17.6 in

449 mm

SM-250 User Manual Rev. 5

Setup

3. Setup

AC Power

The SM-250 has a fixed voltage power supply, and it can work with an input voltage range of either 120

VAC, 60 Hz or 230 VAC, 50 Hz, depending on the specific model.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the fuse holder out of the housing.

4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

5. Insert the fuse holder back in place and reconnect power.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or

fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Disconnect the product from the power outlet before replacing the fuse.

Always replace a blown fuse with one of the same type and rating.

Safety cap

Spare fuse holder

(inside safety cap)

Installed fuse

(held by plastic clip)

Setup

SM-250 User Manual Rev. 5

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The SM-250 may be mounted in any position; however, make sure adequate ventilation is provided around

the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product

for maintenance and programming.

• Make sure that the structure and attachment points can support the weight before hanging the

product (see the Technical Specifications)

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, such as an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. The

bracket has a 13-mm hole, which is appropriate for this purpose.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the

desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the

knobs.

• When mounting the product on the floor, make sure that the product and cables are away from

people and vehicles.

Mounting Diagram

While operating the SM-250, make sure there is adequate snow fluid in the machine to

prevent pump damage. When the snow fluid level becomes low, simply add more snow

fluid to continue using the SM-250.

Safety cable

(such as CH-05

from Chauvet)

Safety loop

Mounting clamp

(such as CLP-15N

from Chauvet)

Hanging

bracket

Carry handle

Bracket

adjustment knobs

SM-250 User Manual Rev. 5

Operation

4. Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to

the Product Overview to see the button locations on the control panel.

Menu Map

Refer to the SM-250 product page on

www.chauvetdj.com

for the latest menu map.

DMX Configuration

The SM-250 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which

is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Starting Address

The SM-250 uses 1 DMX channels in DMX mode, which defines the highest configurable address to 512.

For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.

To select the starting address, do the following:

1. Press <MENU> repeatedly until Addr shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select the starting address, from d 1–512.

4. Press <ENTER>.

DMX Channel Assignments and Values

Standalone Configuration

Set the product in standalone mode to operate without a controller.

To run the SM-250 in standalone mode, follow the instructions below.

1. Press <MENU> repeatedly until SnoU shows on the display.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to select the desired snow volume from S 0–3.

4. Press <ENTER>.

Button Function

<MENU> Press to find an operation mode or to back out of the current menu option

<UP> Press to scroll up the list of options or to find a higher value

<DOWN> Press to scroll down the list of options or to find a lower value

<ENTER> Press to activate a menu option or a selected value

Mode Programming Levels Description

DMX Addr d 1–512 DMX address

Standalone SnoU S 0–3 Standalone snow output

Channel Function Value Percent/Setting

1 Snow volume 000 063 No function

064 255 Snow volume, low to high

Never connect a product that is operating in any standalone mode to a DMX string

connected to a DMX controller. Products in standalone mode may transmit DMX signals

that could interfere with the DMX signals from the controller.

Operation

SM-250 User Manual Rev. 5

Remote Configuration

The SM-250 operates with the included wired timer controller (FC-T). The product also operates with the

FC-W wireless remote, available separately.

Wired Timer Remote Setup

The Wired Timer Remote (FC-T) allows automatic snow output triggering. LED indicators display the

current state of the product and the controller. Rotary knobs set interval, output, and duration times,

whereas manual and continuous buttons allow overriding control.

1. Plug the product in to power.

2. Plug the FC-T in to the wired controller socket on the back of the product. (See the Product

Overview.)

Wired Timer Remote Overview

Wired Timer Remote Operation

The FC-T has three modes of operation: timer, continuous, and manual.

Timer Mode

To operate the SM-250 with the timer function, follow the instructions below:

1. Set the desired output level with the OUTPUT knob (No output below level 5).

2. Set the INTERVAL and DURATION knobs to the desired positions.

•TheINTERVAL knob sets the amount of time in between bursts of snow.

•TheDURATION knob sets the length of time that the snow machine will run during the burst.

3. Press the <TIMER ON/OFF> latching button. The LED indicator above the button will light up.

4. Press the <TIMER ON/OFF> button again to turn off the timer.

Continuous Mode

To trigger the SM-250 to continuously cycle snow, follow the instructions below:

1. Set the desired output level with the OUTPUT knob (No output below level 5).

2. Press the <CONTINUOUS> latching button. The LED indicator above the button will light up. The

snow machine outputs snow until the <CONTINUOUS> button is pressed again.

3. Press the <CONTINUOUS> button again to stop the snow output.

• The MANUAL Button will override the timer function.

• No output until level five on output knob

• The duration of Continuous snow output is based on the capacity of the tank.

• Fluid consumption will be significantly increased during Continuous mode.

INTERVAL Knob

OUTPUT Knob

TIMER ON/OFF Button

DURATION Knob

MANUAL Button

CONTINUOUS Button

OUTPUT knob must be

set to 5 or higher

Andere Handbücher für SM-250

Inhaltsverzeichnis

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ Swarm 5FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Link Par Q4 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR T12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Pinspot Bar Bedienungsanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q4BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband PiX Mini Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze X2 Q6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ JAM Pack Ruby Bedienungsanleitung

Chauvet DJ

Chauvet DJ REEDOMCHARGE-CYC Bedienungsanleitung

Chauvet DJ

Chauvet DJ HURRICANE HAZE 4D Bedienungsanleitung

Chauvet DJ

Chauvet DJ CORE PAR Q60 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Colorband Pix Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane HAZE 1D Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Festoon EXT Bedienungsanleitung

Chauvet DJ

Chauvet DJ COREpar 80 USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ B-250 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 480 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Scorpion Bar RG Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR Flex T USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Scan 360 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Cyc Bedienungsanleitung

Chauvet DJ

Chauvet DJ EVE P-100 WW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung