Chauvet DJ HURRICANE HAZE 4D Bedienungsanleitung

User Manual

HURRICANE HAZE 4D

Hurricane Haze 4D User Manual Rev. 1

TABLE OF CONTENTS

1. Before You Begin....................................................................... 1

What Is Included ........................................................................................... 1

Unpacking Instructions.................................................................................. 1

Claims............................................................................................................................ 1

Text Conventions.......................................................................................... 1

Symbols ........................................................................................................ 1

Disclaimer ..................................................................................................... 1

Product at a Glance ...................................................................................... 2

Safety Notes.................................................................................................. 2

2. Introduction ................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions...................................................................................... 3

3. Setup ........................................................................................... 4

AC Power...................................................................................................... 4

Fuse Replacement......................................................................................................... 4

Mounting ....................................................................................................... 5

Orientation...................................................................................................................... 5

Rigging........................................................................................................................... 5

4. Operation .................................................................................... 6

Hurricane Haze 4D Control Priority............................................................... 6

Control Panel Operation................................................................................ 6

Manual Control Knobs.................................................................................................... 6

Menu Map..................................................................................................... 6

Configuration (DMX) ..................................................................................... 6

Starting Address............................................................................................................. 6

DMX Channel Assignments and Values....................................................... 6

Wired Timer Remote Setup........................................................................... 7

Wired Timer Remote Operation ..................................................................................... 7

5. Maintenance and Storage.......................................................... 8

Hazer Maintenance....................................................................................... 8

Storage.......................................................................................................... 8

6. Technical Specifications ........................................................... 9

Returns............................................................................................ 10

Page 1 of 11

Hurricane Haze 4D User Manual Rev. 1

BEFORE YOU BEGIN

1. BEFORE YOU BEGIN

What Is Included

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com.

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States ofAmerica.

CHAUVET, the Chauvet logo, and Hurricane Haze 4D are registered trademarks or trademarks of Chauvet

& Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other

company and product names and logos referred to herein may be trademarks of their respective

companies.

• Hurricane Haze 4D

•PowerCord

• Wired Timer Remote

• Hanging Bracket with Mounting Hardware

• Warranty Card

• Quick Reference Guide

CONVENTION MEANING

1–512 Arange of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

ON A value to be entered or selected

SYMBOL MEANING

Electrical warning. Not following these instructions may cause electrical damage to

the product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Page 2 of 11

BEFORE YOU BEGIN

Hurricane Haze 4D User Manual Rev. 1

Product at a Glance

Safety Notes

Use on Dimmer Auto Programs 

Outdoor Use Auto-ranging Power Supply 

Sound-Active Replaceable Fuse 

DMX User-Serviceable 

Master/Slave 

• Not intended for permanent installations.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Always disconnect this product from the power source before cleaning it or replacing the

fuse.

• Make sure the power cord is not crimped or damaged.

• Never disconnect the power cord by pulling or tugging on the cord.

• If mounting this product overhead, always secure it to a fastening device using a safety

cable.

• Do not mount this product on a flammable surface (e.g., wood, linoleum, carton, plastic, or

carpet).

• Make sure there are no flammable materials close to the unit while operating

• Do not touch the output nozzle on this product. It is very hot during operation and it may

remain hot for several hours after turning the unit off.

• Do not drink the haze fluid. If you do, call your local emergency service (911 in the US) for

help.

• Do not add perfume, alcohol, gasoline, or any other flammables to the haze fluid.

• Depending on the amount of haze generated, all haze machines may set off smoke

detectors.

• In certain environments, haze fluid-based machines mayleave a slippery residue on floors

and surfaces.

• Do not use for space heating purposes.

• Use only CHAUVET® DJ water-based haze fluid.

• Drain the tank before transporting the product.

• Always make sure that the voltage of the outlet to which you are connecting the product is

within the range stated in the decal or rear panel of the product.

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this

product to rain or moisture.

• Alwaysinstallthis productina locationwithadequateventilation,at least20 in (50cm) from

adjacent surfaces.

• Be sure that no ventilation slots on the unit’s housing are blocked.

• Never connect this product to a dimmer or rheostat.

• Make sure to replace the fuse with another of the same type and rating.

• Never carry the product from the power cord or any moving part. Always use the hanging/

mounting bracket.

• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate this product at

higher temperatures.

• In the event of a serious operating problem, stop using the product immediately.

• Never try to repair this product.Repairs carried out by unskilled peoplecan lead todamage

or malfunction. Please contact the nearest authorized technical assistance center.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Keep this User Manual for future use. If you sell the product to someone else, be sure that

they also receive this document.

Page 3 of 11

Hurricane Haze 4D User Manual Rev. 1

INTRODUCTION

2. INTRODUCTION

Product Overview

Product Dimensions

Fluid Tank

Blower Fan

DMX In/Out

Haze Output Knob

Remote In

Power Switch

Power In

Fuse Holder

Fan Speed Knob

Menu Buttons

LED Display

15.5 in

396 mm 9.6 in

245 mm

11 in

277 mm

Page 4 of 11

SETUP

Hurricane Haze 4D User Manual Rev. 1

3. SETUP

AC Power

The Hurricane Haze 4D has a fixed voltage power supply and it can work with an input voltage of either

120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the specific model.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

Fuse Replacement

1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

2. Pry the fuse holder out of the housing.

3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

4. Insert the fuse holder back in place and reconnect power.

• Always connect the product to a protected circuit (a circuit breaker or fuse).

Make sure the product has an appropriate electrical ground to avoid the risk of

electrocution or fire.

• To eliminate unnecessary wearand improve its lifespan, during periods of non-

use completely disconnect the product from power via breaker or by

unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

Disconnect the product from the power outlet before replacing the fuse.

Safety cap

Spare fuse holder

(inside safety cap)

Installed fuse

(held by plastic clip)

Page 5 of 11

Hurricane Haze 4D User Manual Rev. 1

SETUP

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

Rigging

• Before deciding on a location, always make sure there is easy access to the product for

maintenance and fluid replenishment.

• Make sure adequate ventilation is provided around the product.

• Make sure that the structure or surface onto which you are mounting the product can support the

product’s weight. (see the Technical Specifications)

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, such as an elevated platform or a truss.

• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight

capacity. The bracket has 13-mm holes, which are appropriate for this purpose.

• The rubber feet also serve as floor supports and allow for surface mounting. When mounting the

product on the floor, make sure that the product and cables are away from people and vehicles.

Mounting Diagram

This product may NOT be tilted. This product should be level when on a surface or

when mounted.

While operating the Hurricane Haze 4D, make sure there is adequate haze fluid in

the machine to prevent pump and heater damage. When the haze fluid level

becomes low, simply add more haze fluid to continue using the Hurricane Haze 4D.

Mounting Bracket

Safety Cable

(such as CH-05 from

Chauvet)

Mounting Clamp

(such as CLP-15 or CLP-15N

from Chauvet)

Bracket

Adjustment Knob

Adjustable Scoop

Fluid Level Indicator

Rubber Feet for

Floor Mounting

(x4)

Page 6 of 11

OPERATION

Hurricane Haze 4D User Manual Rev. 1

4. OPERATION

Hurricane Haze 4D Control Priority

The Hurricane Haze 4D operates according to the following priority control levels:

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display, and the two

manual control knobs located to the right of the display. Please refer to the Product Overview to see the

button and knob locations on the control panel.

Manual Control Knobs

The manual control knobs allow for operation of the Hurricane Haze 4D without a controller.

Menu Map

Configuration (DMX)

The Hurricane Haze 4D works with a DMX controller. Information about DMX is in the CHAUVET DMX

Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/

DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX

mode uses. If you choose a starting address that is too high, you could restrict the access to some of the

product’s channels.

The Hurricane Haze 4D uses 2 DMX channels, which defines the highest configurable address to 511.

If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.

To select the starting address, do the following:

1. Press <MENU> repeatedly until d _ _ _shows on the display.

2. Use <UP> or <DOWN> to select the starting address.

3. Press <ENTER>.

DMX Channel Assignments and Values

1. A DMX controller takes the highest priority, and will override both the Wired Timer

Remote and the manual control knobs.

2. The manual control knobs will override the Wired Timer Remote, but not a DMX

controller.

3. The Wired Timer Remote has the lowest priority.

BUTTON FUNCTION

<MENU> Press to find an operation mode or to back out of the current menu option

<UP> Press to scroll up the list of options or to find a higher value

<DOWN> Press to scroll down the list of options or to find a lower value

<ENTER> Press to activate a menu option or a selected value

KNOB FUNCTION

Fan Speed Left knob. Turn clockwise to increase fan speed from 1–100

Haze Output Right knob. Turn clockwise to increase haze output from 0–100

PROGRAMMING LEVELS DESCRIPTION

h 0–100 Haze output, set by the right knob

F 1–100 Fan speed, set by the left knob

d 1–512 DMX starting address

CHANNEL FUNCTION VALUE PERCENT/SETTING

1FanSpeed 000 255 Low to high

2 Haze Output 000 255 Low to high

Page 7 of 11

Hurricane Haze 4D User Manual Rev. 1

OPERATION

Wired Timer Remote Setup

The Wired Timer Remote allows you to automatically trigger haze output by setting output, interval time,

and duration time. LED indicator lights display the machine and controller’s current state. Rotary knobs set

interval, output, and duration times, while manual and continuous buttons allow overriding control.

1. Plug in the haze machine to power.

2. Plug in the wired timer controller to the Remote socket on the back of the haze machine. (See the

Product Overview.)

3. Allow the Hurricane Haze 4D three to four minutes to heat up before continuing.

Wired Timer Remote Overview

Wired Timer Remote Operation

The Wired Timer Remote has three modes of operation: timer, continuous, and manual.

Timer Mode

To trigger the Hurricane Haze 4D with the timer function, follow the instructions below:

1. Set the desired output level with the OUTPUT knob.

2. Set the INTERVAL and DURATION knobs to the desired positions.

•TheINTERVAL knob sets the amount of time in between bursts of haze.

•TheDURATION knob sets the length of time that the haze machine will run during the burst.

3. Press the <TIMER ON/OFF> latching button. The LED indicator above the button will light up.

The timer will now run as set by the INTERVAL, DURATION, and OUTPUT knobs.

4. Press the <TIMER ON/OFF> button again to turn off the timer.

Continuous Mode

To trigger the Hurricane Haze 4D to continuously cycle haze, follow the instructions below:

1. Set the desired output level with the OUTPUT knob.

2. Press the <CONTINUOUS> latching button. The LED indicator above the button will light up. The

haze machine outputs haze until the <CONTINUOUS> button is pressed again.

3. Press the <CONTINUOUS> button again to stop the haze output.

Manual Mode

To trigger the Hurricane Haze 4D manually, do the following:

1. Set the desired output level with the OUTPUT knob.

2. Press and hold the <MANUAL> button on the Wired Timer Remote. The LED indicator above the

button will light up. The haze machine will output haze for as long as you hold down the

<MANUAL> button.

3. Release the <MANUAL> button to stop the haze output.

The MANUAL Button will override the timer function.

• The duration of Continuous haze output is based on the capacity of the tank.

• Fluid consumption will be significantly increased during Continuous mode.

INTERVAL Knob

OUTPUT Knob

TIMER ON/OFF Button

DURATION Knob

MANUAL Button

CONTINUOUS Button

Page 8 of 11

MAINTENANCE AND STORAGE

Hurricane Haze 4D User Manual Rev. 1

5. MAINTENANCE AND STORAGE

Hazer Maintenance

Do not allow the hazer to become clogged. After every 40 hours of continuous operation, use CHAUVET

Fog Cleaner Quart (FCQ) through the system to prevent the accumulation of particulate matter in the

heating element.

The recommended cleaning procedure is as follows.

1. Unplug the product from power.

2. Empty all haze fluid from the machine.

3. Add cleaning solution to the tank.

4. Connect the product to power and allow it to warm up.

5. Run the unit in a well-ventilated area until the tank is almost empty. Do not allow the pump to run

dry.

6. Refill with haze fluid to continue using the hazer. Run the machine briefly to clear any remaining

cleaning solution from the pump and heater.

Storage

Before storing the hazer, run FCQ through the system as described in the cleaning procedure above;

however, only follow steps 1 through 5. Do not refill the tank with haze fluid if storing the hazer.

Cleaning the system prior to storage will help prevent any particles from condensing inside the pump or

heater while not in use.

Do Not operate the machine without fluid at any time.

Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your

Hurricane Haze 4D. Make sure you use FCQ regularly, no longer than 90 days

between cleanings, to increase the life of your product.

Test-run your Hurricane Haze 4D on a monthly basis to achieve the best

performance.

Inhaltsverzeichnis

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ WASH FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ 6SPOT Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband HEX 9 IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze X2 Q6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimBEAM QUAD IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR MOVE ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Festoon EXT Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR LT BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO W USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane 700 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Cumulus Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze LT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SM-250 Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband PiX Mini Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZ Link Par Q4 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Festoon Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Flex H4 IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze Bedienungsanleitung

Chauvet DJ

Chauvet DJ FREEDOM CHARGE 8 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Funfetti Shot Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband PiX ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ SWARM 4FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ intimidator SPOT 375Z IRC Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung