Chauvet DJ CH-02 Bedienungsanleitung

CH-02

Quick Reference Guide

CH-02 QRG EN

About this

Guide

The CH-02 Quick Reference Guide (QRG) has product information

how to use your new stand. See www.chauvetlighting.com/product-

manuals-literature/ for the latest information on the CH-02.

Disclaimer

The information and specifications contained in this QRG

are subject to

change without notice.

Safety Notes

Read all the safety notes listed below before installing, operating, or

maintaining

•This product is not intended for permanent installation.

•This product should be assembled only by trained professionals.

•Be sure to assemble this product using all the parts included.

•Do not use this stand for a load that exceeds the maximum weight

capacity in this document, or on the label on the product.

•Do not use the product if any of the following conditions exist:

owelded joints are cracked or compromised

ohorizontal rungs, T-bar, or diagonals are dented or damaged

otripod, junctions, connectors, or quick release pins are bent

othe product has been dropped

•Do not drag the product over the floor or other objects.

•Place sand bags over the lower cross bars for increased stability of

the product.

The maximum, evenly distributed, load capacity for the CH-

02 is

110 lb (50 kg).

CH-02 QRG EN

Contact

Outside the U.S., United Kingdom, Ireland or Mexico,

contact your

distributor to request support or return a product. Visit

www.chauvetlighting.com for contact information.

What is

Included

•CH-02

•Connecting Hardware •Warranty card

•Quick Reference Guide

Not Included

The following common items are not included, but are suggested for

the

assembly of the CH-02.

•Phillips Screwdriver

•Wrench

Be sure to follow all instructions and cautionary statements that

may

accompany any additional items you obtain.

To Begin

Carefully unpack the product immediately. C

heck that all the parts are in

the package, and that they are in good condition.

If the box or any of the contents appear damaged from shipping, or show

signs of mishandling, save all packaging and file a cl

aim with the carrier

immediately;

do not notify CHAUVET®. Failure to report damage to the

carrier immediately or failure to have all packaging available for inspection

may invalidate your claim.

For other issues, such as missing components or parts, damage not related

to shipping, or concealed damage, file a claim with CHAUVET® within 7

days of delivery. For information on contacting CHAUVET®, see

CH-02 QRG EN

Parts List Including Connecting Hardware

Quantities

Parts (size)

Description

Diagram

hex

head bolts (M10)

Used at attachment

points for fixtures

on the

T-bar and side bars

8 wing nuts (M10)

Used in

combination with M10 hex bolts

8 hex nuts (M10)

Used in

combination with M10 hex bolts

15 washers

Used in

combination with M10 hex bolts

5 small hex bolts (M6)

Used in combination with small hex nuts

tighten braces

18 small Phillips-head

bolts (M6)

Used in combination with small hex nuts

tighten braces

23 small hex nuts (M6)

Used in combination with small hex and

Phillips

-head bolts

6 braces

Brace

s for T-bar and side bars

(takes 2 small bolts and nuts)

1 brace

Brace for the bottom of the

T-bar

assembly

(takes 3 small bolts and nuts)

3 T-braces

Brace

s for T-bar and side bars

2 side bars

Used in the side bar assembly

1 T-bar

Used in the

T-bar assembly

4 small support bars

Used in the

T-bar and side bar

assemblies

1 tripod assembly

Tripod

portion of the CH-02

(pre

-assembled)

1 hex wrench

Tool fo

r adjusting the small hex bolts

The tripod section comes assembled; however, the T-bar and side ba

require assembly. For details, see Assembly Instructions and

Assembly

Guide sections.

CH-02 QRG EN

Description

The CH-02 is a heavy-duty aluminum T-bar stand

with side bar supports,

8 optional mounting points, and quick release

pins for easy setup and

teardown. The CH-02 is great for mobile DJs and entertainers.

Assembly

Instructions

To assemble the CH-02, refer to the diagrams on the following pages and

do the following:

Figure 1:

1. Loosen lower knob on the tripod assembly.

2. Open the tripod legs and place the product on the floor

(or level surface) so the center shaft is vertical.

3. Tighten the lower knob on the tripod to secure it.

4. Loosen the upper knobs on the center shaft.

5. Extend the inner tube of the center shaft.

6. Tighten the upper knobs on the center shaft to secure the tube in place.

Figure 2:

7. Assemble the supported side bars. See T-bar and Side Bars

Assemblies and T-bar and Side Bars Finished View for more

information and close-up views.

8. Slide the supported side bars assembly over the shaft and secure it at

the desired height by tightening the bolts.

Note: Be sure to tighten all the bolts of the side bars assembly.

Figure 3:

9. Assemble the T-bar with supports. See T-bar and Side Bars

Assemblies and T-bar and Side Bars Finished View for more

information and close-up views.

10.Slide the T-bar with supports over the top of the shaft and secure it

into place by tightening bolts.

Note: Be sure to tighten all bolts of the T-bar assembly.

CH-02 QRG EN

Assembly

Guide

Fig. 1

Step 2. Open the tripod legs and

place the product on the floor

(or level surface) so the center

shaft is vertical.

Step 5. Extend the inner tube

of the center shaft.

Upper Knobs to be

adjusted inSteps 4 and 6.

Lower Knob to be adjusted

in Steps 1 and 3.

CH-02 QRG EN

Step 7.Assemble the

supported side bars.

Step 8.

Slide supported side bars

assembly over the shaft.

Fig. 2

Tighten all bolts once the

side bars assembly is in

place after Step 8.

CH-02 QRG EN

Step 10. Slide T-bar assembly

with supports over the shaft.

Step 9. Assemble T-bar with

supports.

Fig. 3

Tighten all bolts once the T-bar

assembly is in placeafter Step 10.

CH-02 QRG EN

T-bar and

Side Bars

Assemblies

T-bar Assembly

Side Bars

Assembly

CH-02 QRG EN

T-bar and

Side Bars

Finished View

After the braces are in place, tighten

bolts to secure the braces

Attachment points for all braces

Inhaltsverzeichnis

Sprachen:

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung