Chauvet Professional GROUND SUPPORT 2 KIT Bedienungsanleitung

Quick Reference Guide

English EN

Español ES

Français FR

Deutsch DE

Nederlands NL

GROUND SUPPORT 2 KIT

QUICK REFERENCE GUIDE

Ground Support 2 Kit QRG Rev. 1

About This Guide

The Ground Support 2 Kit Quick Reference Guide (QRG) has basic product information such as mounting diagrams and

technical specifications.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• This product contains no user-serviceable parts.

• When selecting an installation location, consider ease of access for operation and routine maintenance of attached

panels.

• Make sure that the floor structure is stable and immobile.

• DO NOT use the kit if any welded joints are cracked or appear damaged in any way.

• The ballast weights stated in this specification are for indoor usage only. If this kit is used outdoors, the unit must

be protected from wind and additional ballast (as determined by a qualified and competent rigger) must be used.

Contact

Outside the US, United Kingdom, Ireland, Benelux, France, Germany, or Mexico contact your distributor to request

support or return a product. Visit www.chauvetprofessional.com for contact information.

What is Included

• Floor Base (x2)

• Angling Horizontal Bar (x2)

• Angling 1M Pipe with 2 clamps (x3)

• 1M Ladder Truss with Spigots, Pins, and Safety Clips (x6)

• Panel Attachment Arm (x6)

• TR16 Screw Jacks (x10)

• M12 Panel Attachment Screws (x12)

• Quick Reference Guide

The Ground Support 2 Kit is shipped in the road case.

Ground Support 2 Kit QRG Rev. 1

QUICK REFERENCE GUIDE

Product Description

The Ground Support 2 Kit is a complete ground support solution for stacking F-Series Video Panels as a video wall on the

floor. Multiple kits can be used to stack wider video walls. The Ground Support 2 Kit can accommodate flat and concave

video walls, including a 5° or 10° curve (kit sold separately). The DRB-F100CM or DRB-F50CM dual function rig bars are

required for operation.

Product Overview

Panel Attachment Arm (x6)

Floor Base (x2)

Angling Horizontal Bar (x2)

Angling 1M Pipe

with 2 clamps (x3)

1M Ladder Truss (x6)

QUICK REFERENCE GUIDE

Ground Support 2 Kit QRG Rev. 1

Product Dimensions

10.24 ft

3.12 m

3.28 ft

1 m 3.28 ft

1 m

Ground Support 2 Kit QRG Rev. 1

QUICK REFERENCE GUIDE

Mounting

Before mounting this product, read the Safety Notes, as well as those for the attached products.

Mounting Diagram

Mounting Procedure

1. Insert TR16 Screw Jack into the bottom of the dual function F-series rig bar panel.

2. Align the floor base panel with the female speego connection on the rig bar.

3. Use the tightening nut to adjust the height of the rig bar and floor base panel. Verify they are level with the

surface.

4. Turn the locking nut on the screw jacks to secure the position.

Dual-function F-series

Rig Bar

Floor Base

TR16 Screw Jacks

Male Speego

connection

Dual-function F-series

Rig Bar

Female Speego

connection

Locking Nut

Tightening Nut

QUICK REFERENCE GUIDE

Ground Support 2 Kit QRG Rev. 1

Connect the ladder truss to the floor base and insert the spigots and safety clip (be sure to insert the spigots correctly)

6. Repeat steps with additional floor base and connect the two floor base panels with the angling horizontal bars.

Locking Spigots

Ladder Truss

Angling horizontal bars

Ground Support 2 Kit QRG Rev. 1

QUICK REFERENCE GUIDE

7. Place ballast weights (sandbags or steel weights) over the angling horizontal bars.

8. Attach the F-series video panel to the rig bar panel by aligning the magnetic alignment conicals and locking the

male connection speegos.

9. Insert the M12 panel attachment screws into the appropriate M12 threaded mounting hole.

The F2 and F5IP video panels have frames with a center mounting position. The F3 video panel will

need the panel attachment screw inserted at the corner of the frame. Both the F4IP and Vivid 4 have

been upgraded with center mounting position frames, and may vary depending on order date.

M12 Panel

Attachment Screws

Video Panel

QUICK REFERENCE GUIDE

Ground Support 2 Kit QRG Rev. 1

M12 Panel

Attachment Screws

Center Mount Position

Corner Mount Position

M12 Panel

Attachment Screws

Ground Support 2 Kit QRG Rev. 1

QUICK REFERENCE GUIDE

10. Place the panel attachment arm over the panel attachment screw(s) and move down to secure.

11. Secure the clamp of the panel attachment arm to the ladder truss.

The panel attachment arm is adjustable depending on the type of video panel being attached. If the

attachment arm is connected to the center mounting position, it will need to be extended to the third

locking level. If connecting to the corner mounting position, the second locking level must be used. If

using the curve kit on your video panel, use the first locking level to shorten the panel attachment arm.

M12 Panel

Attachment Screws Panel Attachment Arm

321

QUICK REFERENCE GUIDE

Ground Support 2 Kit QRG Rev. 1

12. Continue to stack the ladder truss and video panels for the desired video wall size.

Supports walls between 4.92 ft (1.5 m) and 8.2 ft (2.5 m) wide, and as high as 9.85 ft (3 m) tall. Combine

additional Ground Support 2 Kits to achieve wider walls.

Andere Handbücher für GROUND SUPPORT 2 KIT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chauvet Professional DJ-Equipment Handbücher

Chauvet Professional

Chauvet Professional Ovation FD-165WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue Outcast 1 Hybrid Bedienungsanleitung

Chauvet Professional

Chauvet Professional ONAIRPANEL2IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-260CW Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE ARRAY 1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Batten 72X Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation B-2805FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R2X SPOT Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-260CW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Solo Batten Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado PXL Curve 12 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Amhaze Whisper Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R3X WASH Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado PXL Curve 12 Bedienungsanleitung

Chauvet Professional

Chauvet Professional nexus Aq 5x5 Bedienungsanleitung

Chauvet Professional

Chauvet Professional PowerStream 4 IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION REVE P-3 IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-95WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation P-56FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Strom 1 Spot Bedienungsanleitung

Chauvet Professional

Chauvet Professional Amhaze Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue R1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue R2X Wash VW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung