Chauvet Professional Rogue Outcast 1L Beam Bedienungsanleitung

User Manual

Model ID: ROGUEOUTCAST1LBEAM

Rogue Outcast 1L Beam User Manual Rev. 2

Edition Notes

The Rogue Outcast 1L Beam User Manual includes a description, safety precautions, installation,

programming, operation, and maintenance instructions for the Rogue Outcast 1L Beam.

Trademarks

Chauvet, Chauvet Professional, the Chauvet logo, Rogue, Outcast, and Rogue Outcast are registered

trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United

States and other countries. Other company and product names and logos referred to herein may be

trademarks of their respective companies.

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com

Document Revision

This is revision 2 of the Rogue Outcast 1L Beam User Manual. Go to www.chauvetprofessional.com for

the latest version.

Rogue Outcast 1L Beam User Manual Rev. 2

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 3

What Is Included ........................................................................................... 3

Claims ........................................................................................................... 3

Text Conventions .......................................................................................... 3

Symbols ........................................................................................................ 3

Safety Notes.................................................................................................. 4

Expected LED Lifespan................................................................................. 5

2. Introduction ................................................................................ 6

Description .................................................................................................... 6

Features........................................................................................................ 6

Product Overview.......................................................................................... 6

Product Dimensions ...................................................................................... 7

3. Setup ........................................................................................... 8

AC Power...................................................................................................... 8

AC Plug .............................................................................................................. 8

Fuse Replacement ............................................................................................. 8

Power Linking..................................................................................................... 8

DMX Linking.................................................................................................. 8

DMX Personalities.............................................................................................. 8

Remote Device Management............................................................................. 8

USB Software Update ................................................................................... 9

Mounting ....................................................................................................... 10

Orientation.......................................................................................................... 10

Rigging ............................................................................................................... 10

Procedure........................................................................................................... 10

4. Operation .................................................................................... 11

Control Panel Operation................................................................................ 11

Programming................................................................................................. 11

Control Panel Lock........................................................................................ 11

Menu Map .......................................................................................................... 12

Address......................................................................................................... 14

Run Mode...................................................................................................... 14

DMX Personality ................................................................................................ 14

Control Channel Assignments and Values.................................................... 15

Gobo Wheel ....................................................................................................... 18

Color Wheel ....................................................................................................... 18

Auto Test............................................................................................................ 19

Manual Test ....................................................................................................... 19

Setup............................................................................................................. 19

Pan Reverse ...................................................................................................... 19

Tilt Reverse ........................................................................................................ 19

Screen Reverse ................................................................................................. 19

Pan Angle........................................................................................................... 20

Tilt Angle ............................................................................................................ 20

BL.O. P/T Move.................................................................................................. 20

BL.O. Color Move............................................................................................... 20

BL.O. Gobo Move .............................................................................................. 20

Backlight Timer .................................................................................................. 20

Pulse Width Modulation ..................................................................................... 20

Table of Contents

Rogue Outcast 1L Beam User Manual Rev. 2

Fan Mode ........................................................................................................... 20

USB Update ....................................................................................................... 20

Reset Function ................................................................................................... 20

Factory Reset Function ...................................................................................... 21

System Information ....................................................................................... 21

Offset Mode................................................................................................... 21

5. Maintenance................................................................................ 22

Product Maintenance .................................................................................... 22

6. Technical Specifications ........................................................... 23

Warranty & Returns....................................................................................... 24

Rogue Outcast 1L Beam User Manual Rev. 2

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate a claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

• Rogue Outcast 1L Beam

• Seetronic Powerkon IP65 power cable

• 2 Omega brackets with mounting hardware

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic

IP-rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Before You Begin

Rogue Outcast 1L Beam User Manual Rev. 2

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

• The luminaire is intended for professional use only.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord

or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or its service

agent or a similar qualified person.

• CAUTION:

• This product’s housing may be hot when operating. Mount this product in a location with adequate

ventilation, at least 20 in (50 cm) from adjacent surfaces.

•

When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure,

allow the product to fully acclimate to the surrounding environment before connecting it to power.

• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding

notification of strobe use.

• ALWAYS:

• Disconnect from power before cleaning the product or replacing the fuse.

• When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power

and data cable.

• Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in

use.

• Replace the fuse with the same type and rating.

• Use a safety cable when mounting this product overhead.

• Connect this product to a grounded and protected circuit.

•DO NOT:

• Open this product. It contains no user-serviceable parts.

• Look at the light source when the product is on.

• Leave any flammable material within 20 cm of this product while operating or connected to power.

• Connect this product to a dimmer or rheostat.

• Operate this product if the housing, lenses, or cables appear damaged.

• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation

is fine.

• Permanently install outdoors in locations with extreme environmental conditions. This includes, but

is not limited to:

• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).

• Locations where normal temperatures exceed the temperature ranges in this manual.

• Locations that are prone to flooding or being buried in snow.

• Other areas where the product will be subject to extreme radiation or caustic substances.

• ONLY use the handles or the hanging/mounting brackets to carry this product.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If a Chauvet product requires service, contact Chauvet Technical Support.

Rogue Outcast 1L Beam User Manual Rev. 2

Before You Begin

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than

single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is

40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit

the overall intensity..

Introduction

Rogue Outcast 1L Beam User Manual Rev. 2

2. Introduction

Description

The Rogue Outcast 1L Beam is an IP65 moving head that outputs an intensely bright 140 W beam with

14-position, individually controllable color wheel for solid and split hues. The outdoor-ready unit raises the

bar in dynamic effect options with its ability to focus down to a pencil-thin 1.4° beam for tight aerials,

overlapping 8- and 5-facet prisms, frost for even light distribution, and 14 rotating and static gobos for even

more creative options. Control is over DMX and RDM.

Features

• Fully featured, high powered, IP65-rated LED beam fixture with a single color wheel, single gobo

wheel, rotating and static gobos, and layerable prisms in a lightweight and durable aluminum /

magnesium casing.

• Fast and precise movement of pan and tilt functions.

• Individually controllable and layerable 5- and 8-facet prisms.

• Frost for even light distribution.

• 5-pin DMX input/output connections.

• Tight 1.4° beam for extremely focused areal effects.

• RDM enabled for remote addressing and troubleshooting.

• 7 rotating and 7 static gobos on one wheel for dynamic gobo effects.

• Easy to read OLED display with simple, effective menu options.

• Simple and complex DMX channel profiles for programming versatility.

• USB-C port for uploading software.

Product Overview

Menu buttons

Handles

Power input/

output

Fuse

5-pin DMX in/out

Display screen

Condensation

Valve

Rogue Outcast 1L Beam User Manual Rev. 2

Introduction

Product Dimensions

12.56 in

319mm

13.58 in

345mm

19.88 in

505mm

11.93 in

303mm

11.93 in

303mm

8.58 in

218 mm

7.56 in

192mm

8.82 in

224mm

3.03 in

77mm

Setup

Rogue Outcast 1L Beam User Manual Rev. 2

3. Setup

AC Power

The Rogue Outcast 1L Beam has an auto-ranging power supply, and it can work with an input voltage

range of 100 to 240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

AC Plug

The Rogue Outcast 1L Beam comes with a power input cord terminated with a Seetronic Powerkon IP65

connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came

with the product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with another fuse of the same type and rating (T 5 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

Power Linking

This product comes with a power input cord. Power-linking cables are available from Chauvet for

purchase.

It is possible to power link Rogue Outcast 1L Beam products. See the table below for the current

draw at each voltage and frequency:

Never exceed 12 A on a single circuit. Power-linking cables can be purchased separately

DMX Linking

The Rogue Outcast 1L Beam can be linked to a DMX controller using a 5-pin DMX connection. If using

other DMX-compatible products with this product, each can be controlled individually with a single DMX

controller.

DMX Personalities

The Rogue Outcast 1L Beam uses a 5-pin DMX data connection for the 17- and 19-channel DMX personalities.

• Refer to the Introduction for a brief description of each DMX personality.

• Refer to the Operation chapter to learn how to configure the Rogue Outcast 1L Beam to work in

these personalities.

•The DMX Values section provides detailed information regarding the DMX personalities.

Remote Device Management

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate

bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the

manufacturer, as not all DMX controllers have this capability. The Rogue Outcast 1L Beam supports RDM

protocol that allows feedback to make changes to menu map options.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

Make sure to disconnect the product’s power cord before replacing a blown fuse.

Always replace the blown fuse with another of the same type and rating.

100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz

Current Draw 2.45 A 2.08 A 1.15A 1.04 A 1.01 A

Andere Handbücher für Rogue Outcast 1L Beam

Inhaltsverzeichnis

Andere Chauvet Professional DJ-Equipment Handbücher

Chauvet Professional

Chauvet Professional Ovation F-915VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue R1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional EPIX STRIP TOUR Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Range IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-910FC IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Epix Drive 900 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-415FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R2X SPOT Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 1-Quad Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-415FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation C-805FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-910FC IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir Flex Drive 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Strom 1 Spot Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE Saber Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R2X SPOT Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H7XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION E-910FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-260WW IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 1 Wash Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Solo Batten 4 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par H18X Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation FD-165WW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung