Chauvet Professional ROGUE R3 SPOT Bedienungsanleitung

USER MANUAL

TABLE OF CONTENTS

Rogue R3 Spot User Manual Rev. 2

TOC 1 of 2

TABLE OF CONTENTS

1. Edition Notes .............................................................................. 1

Trademarks ................................................................................................... 1

Document Printing......................................................................................... 1

Intended Audience ........................................................................................ 1

Disclaimer ..................................................................................................... 1

Document Revision....................................................................................... 1

2. Before You Begin ....................................................................... 2

What Is Included ........................................................................................... 2

Claims ........................................................................................................... 2

Manual Conventions ..................................................................................... 2

Symbols ........................................................................................................ 2

Expected LED Lifespan................................................................................. 2

Safety Notes.................................................................................................. 3

Operation ...................................................................................................... 3

3. Introduction ................................................................................ 4

Description .................................................................................................... 4

Features........................................................................................................ 4

Product Overview.......................................................................................... 4

Product Dimensions ...................................................................................... 5

4. Setup ........................................................................................... 6

AC Power...................................................................................................... 6

Power Linking................................................................................................ 6

DMX Linking.................................................................................................. 6

DMX Personalities.......................................................................................................... 6

Remote Device Management (RDM) ............................................................ 7

Mounting ....................................................................................................... 7

Orientation...................................................................................................................... 7

Rigging ........................................................................................................................... 7

Procedure....................................................................................................................... 7

Gobo Wheels............................................................................................... 8

Color 1............................................................................................................................ 9

Color 2............................................................................................................................ 9

5. Operation ................................................................................... 10

Control Panel Operation ...............................................................................10

Control Options ............................................................................................10

Programming ................................................................................................10

Menu Map ..................................................................................................11

DMX Value ...................................................................................................13

Address ........................................................................................................20

Run Mode .....................................................................................................20

DMX Personality ..........................................................................................20

Auto Test ....................................................................................................20

Manual Test ................................................................................................20

Setup.............................................................................................................21

Tilt Reverse.................................................................................................21

Screen Reverse ...........................................................................................21

Pan Angle ...................................................................................................21

Tilt Angle ....................................................................................................21

Rogue R3 Spot User Manual Rev. 2

TABLE OF CONTENTS

TOC 2 of 2

Pan and Tilt Blackout ....................................................................................21

Color Movement Blackout ..............................................................................21

Gobo Movement Blackout .............................................................................21

Pulse Width Modulation ................................................................................21

Reset Function ............................................................................................22

Factory Reset Function .................................................................................22

System Information ......................................................................................22

Offset Mode ..................................................................................................22

6. Technical Information ............................................................... 24

Product Maintenance ...................................................................................24

7. Technical Specifications .......................................................... 25

Returns ........................................................................................... 26

Page 1 of 27

EDITION NOTES

Rogue R3 Spot User Manual Rev. 2

1. Edition Notes

The Rogue R3 Spot User Manual includes a description, safety precautions, installation, programming,

operation and maintenance instructions for the Rogue R3 Spot as of the release date of this edition.

Trademarks

CHAUVET, the Chauvet logo and Rogue R3 Spot are registered trademarks or trademarks of Chauvet &

Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company

and product names and logos referred to herein may be trademarks of their respective companies.

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com

Document Revision

This Rogue R3 Spot User Manual is the 2nd edition of this document. Go to www.chauvetprofessional.com

for the latest version.

Page 2 of 27

Rogue R3 Spot User Manual Rev. 2

BEFORE YOU BEGIN

2. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Symbols

Expected LED Lifespan

LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in

clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered

LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this

lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by

improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting

the overall projection intensity may extend the LEDs’ lifespan.

• Rogue R3 Spot

• Neutrik® powerCON® power cord

• 2 Omega brackets

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

<SET> A button on the product’s control panel

Settings A product function or a menu option

Symbol Meaning

Electrical warning. Not following these instructions may cause electrical damage to

the product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of

Seetronic IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A

digital data transmission protocol.

Page 3 of 27

BEFORE YOU BEGIN

Rogue R3 Spot User Manual Rev. 2

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Always disconnect the product from the power source before cleaning or replacing the fuse.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

• The product is intended for professional use only.

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to

rain or moisture. (IP20).

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,

humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a

failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent

surfaces.

• Make sure there are no flammable materials close to the product when operating.

• Always carry this product by the handles. Do not carry from the head.

• When hanging this product, always secure to a fastening device using a safety cable.

• The product should be positioned so that prolonged staring into it at a distance closer than 2.3 m is

not expected.

Power and Wiring

• Always make sure you are connecting the product to the proper voltage in accordance with the

specifications in this manual or on the product’s specification label.

• Never connect the product to a dimmer pack or rheostat.

• Never disconnect this product by pulling or tugging on the power cable.

• If the external flexible cable or cord of this product is damaged, it shall be replaced with a special

cable or cord exclusively available from the manufacturer or its service agent.

Operation

• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged

parts replaced by an authorized technician at once.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• Do not aim this product toward the sun. The lenses could concentrate the solar energy and cause internal

overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.

• In the event of a serious operation problem, stop using this product immediately!

This product contains no user-serviceable parts. Any reference to servicing in

this User Manual will only apply to properly trained, certified technicians. Do not

open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this

product.

If your Chauvet product requires service, contact Chauvet Technical Support.

Page 4 of 27

Rogue R3 Spot User Manual Rev. 2

INTRODUCTION

3. Introduction

Description

Rogue R3 Spot delivers intense output, crisp optics, and sharp focus, and maintains a value proposition

designed to maximize ROI. This moving spot has a bright 300 W LED light engine that produces an even

field of light, a rotating and a static gobos, (2) 8-position and split-color-enabled color wheels, and three-

facet prism to create stunning looks. A quick moving zoom range of 13°–37° adds to its flexibility of use by

giving the Rogue R3 Spot the ability to cover large areas.

Features

• Intense 300 W LED light engine for bold beams

• Zoom angle of 13° to 37° to cover stages and surfaces from a distance

• Perfect gobo morphing between gobo wheels

• Two color wheels with 7 colors, split color ability, and continuous variable speed scrolling

• Iris, 3-facet prism, and frost for beam control

• 16-bit LED dimming for fade control

•Neutrik

®powerCON®power input/output connections for power linking

• 3- and 5-pin DMX input/output connections

• RDM enabled for remote addressing and trouble shooting

• Selectable PWM settings to maintain flicker-free operation on camera

• Simple and complex DMX channel profiles for programming versatility

Product Overview

buttons

Power

in/out

Fuse

Handles

DMX

out/in

Display

panel

Power switch

Page 5 of 27

INTRODUCTION

Rogue R3 Spot User Manual Rev. 2

Product Dimensions

14.2 in

360 mm

23.7

601 mm

11 in

282 mm

14.7 in

373mm

Page 6 of 27

Rogue R3 Spot User Manual Rev. 2

SETUP

4. Setup

AC Power

Each Rogue R3 Spot has an auto-ranging power supply that works with an input voltage range of 100 to

240 VAC, 50/60 Hz. To determine the power requirements for each Rogue R3 Spot, refer to the label

affixed to the product. You can also refer to the Technical Specifications chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more

information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.

AC Plug

The Rogue R3 Spot comes with a power input cord terminated with a Neutrik® powerCON® connector on

one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your

product has no plug, or if you need the change the plug, use the table below to wire the new plug.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with a another fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

Power Linking

The product supports power linking. You can power link up to 3 products at 120 V; up to 5 at 208 V; or up

to 6 at 230 V. This product comes with a power input cord. Power linking cables are available from Chauvet

for purchase.

DMX Linking

You can link the Rogue R3 Spot to a DMX controller using a 3- or 5-pin DMX connection. If using other

DMX-compatible products with this product, you can control each individually with a single DMX controller.

DMX Personalities

The Rogue R3 Spot uses a 3- or 5-pin DMX data connection for its 19-channel or 25-channel DMX

personalities.

• Refer to the Introduction for a brief description of each DMX personality.

• Refer to the Operation chapter to learn how to configure the Rogue R3 Spot to work in these

personalities.

• The DMX Values section provides detailed information regarding the DMX personalities.

• Always connect the product to a protected circuit (a circuit breaker or fuse).

Make sure the product has an appropriate electrical ground to avoid the risk of

electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-

use completely disconnect the product from power via breaker or by unplugging

it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

If you are not familiar with or need more information about DMX standards,

Master/Slave connectivity, or the DMX cables needed to link this product to a

DMX controller, download the DMX Primer from the Chauvet website:

www.chauvetprofessional.com.

Page 7 of 27

SETUP

Rogue R3 Spot User Manual Rev. 2

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate

bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the

manufacturer as not all DMX controllers have this capability. The Rogue R3 Spot supports RDM protocol

that allows feedback to make changes to menu map options.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,

configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product.

• Before deciding on a location for the product, make sure there is easy access to the product for

maintenance and programming purposes.

• Make sure that the structure onto which you are mounting the product can support the product’s

weight. See the Technical Specifications for weight information.

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• When power linking multiple products, mount the products close enough for power linking cables to

reach.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the

desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the

knobs.

Procedure

The Rogue R3 Spot comes with a preinstalled mounting surface to which you will be able to attach the

included omega bracket. Make sure the clamps are capable of supporting the weight of this product. Use

at least 2 mounting points per product. In addition, use a safety cable to link the product to the structure.

For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.

Mounting Diagram

Omega bracket

Safety cable

(such as CH-05 from

Chauvet)

Mounting clamp

(such as CLP-15 or CLP-15N

from Chauvet)

Floor Mounting

Overhead Mounting

Andere Handbücher für ROGUE R3 SPOT

Inhaltsverzeichnis

Andere Chauvet Professional DJ-Equipment Handbücher

Chauvet Professional

Chauvet Professional COLORdash Par-Quad 7 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-260CW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Colorado 1 Quad Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE Saber Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation B-2805FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional ONAIRPANEL2IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-415FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Strike P38 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORDASHACCENT3 Bedienungsanleitung

Chauvet Professional

Chauvet Professional VIP DRIVE 10-5 Nova Bedienungsanleitung

Chauvet Professional

Chauvet Professional FD-105WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Colorado 1 Solo Bedienungsanleitung

Chauvet Professional

Chauvet Professional Epix Drive 900 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-910FC IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-415VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir FLEX 12 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Amhaze Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION ED-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Colorado 1 Quad Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-915FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-2FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Hex 12 QRG Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATIONREVEE3IP Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung