Chauvet Professional REM-RB100CMIP Bedienungsanleitung

Model ID: REMRB100CMIP

User Manual

REM-RB100CM IP User Manual Rev. 1

Edition Notes

The REM-RB100CM IP User Manual includes a description, safety precautions, installation, programming,

operation and maintenance instructions for the REM-RB100CM IP as of the release date of this edition.

Trademarks

Chauvet, Chauvet Professional, the Chauvet logo, and REM are registered trademarks or trademarks of

Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.

Other company and product names and logos referred to herein may be trademarks of their respective

companies.

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com.

Document Revision

This is revision 1 of the REM-RB100CM IP User Manual. Go to www.chauvetprofessional.com for the

latest version.

REM-RB100CM IP User Manual Rev. 1

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

Safety Notes.................................................................................................. 2

2. Introduction ................................................................................ 3

Description .................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 3

3. Setup ........................................................................................... 4

Mounting ....................................................................................................... 4

Orientation.......................................................................................................... 4

Rigging ............................................................................................................... 4

Overhead Mounting............................................................................................ 4

Clamp Attachment Bracket ............................................................................................. 5

Removing the Hoist Rings .............................................................................................. 5

Stacking ............................................................................................................. 6

Stacking with Ground Support 2 Kit................................................................................ 7

Adjusting the Height ...................................................................................... 8

Inspecting for Faults...................................................................................... 8

4. Technical Specifications ........................................................... 9

Warranty & Returns....................................................................................... 10

Before You Begin

REM-RB100CM IP User Manual Rev. 1

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate a claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

•REM-RB100CMIP

• 2x Clamp attachment bracket (DRB-CTC)

• 2x Clamp bolt for TRUSST CTC-50HC

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function correctly

if this information is not used.

Useful information.

REM-RB100CM IP User Manual Rev. 1

Before You Begin

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

• ALWAYS:

• Take environmental aspects into account when using outdoors. The performance or structural

integrity of LED video panels and rigging hardware may be affected by sunlight, rain, or

especially, wind.

• Consult with a professional structural engineer for any Temporary Demountable Structure

(temporary indoor or outdoor stage) designs to ensure this product can be used safely in each

application.

•DONOT:

• Submerge this product (adhere to standards for the published IP rating). Regular outdoor

operation is fine.

• Permanently install outdoors in locations with extreme environmental conditions. This includes,

but is not limited to:

• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).

• Locations where normal temperatures exceed the temperature ranges in this manual.

• Locations that are prone to flooding or being buried in snow.

• Other areas where the product will be subject to extreme radiation or caustic substances.

• In the event of a serious operating problem, stop using immediately.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If a Chauvet product requires service, contact Chauvet Technical Support.

Introduction

REM-RB100CM IP User Manual Rev. 1

2. Introduction

Description

The REM-RB100CM IP is a dual-function rig bar which can be used to hang video panels overhead and for

ground-stacking purposes with the Ground Support 2 Kit. With an IP65 rating, use in combination with

REM IP video panels for versatile and easy video wall setups almost anywhere.

Features

• REM Rig Bar, used for both overhead hanging and ground stacking

•Works with Chauvet REM video panels

•Equipped hoist ring supports standard rigging hardware for overhead hanging (1/2” and 5/8”

shackles)

•Included Clamp attachment bracket (DRB-CTC) allows for direct connection using M12 bolts in

clamps using TRUSST CTC-50HC

Product Overview

Product Dimensions

Bottom

Alignment hole (x4)

Horizontal alignment pins

Light-blocking foam

Alignment magnet (x4)

TR16 screw jack mounts

Top

Back

Sides

Receivers

(for stacking)

Vertical alignment conical (x4) Hoist assembly

Receivers

(For use with

Ground Support 2 Kit)

Latch (x5)

Alignment hole (x4)

Alignment holes

Height adjustment bolt (x2)

Hoist assembly

Receiver

2.36 in

60 mm

39.35 in

999.6 mm

4.72 in

120 mm

REM-RB100CM IP User Manual Rev. 1

Setup

3. Setup

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,

configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product.

• Before deciding on a location for the product, make sure there is easy access for maintenance.

• Make sure that the structure and attachment points can support the weight before hanging the

product and attaching REM video panels to it. See the Technical Specifications for weight

information, and download the User Manuals for REM video panels from

www.chauvetprofessional.com.

• When rigging the product onto a truss, use mounting hardware of appropriate weight capacity.

Overhead Mounting

1. Insert alignment conicals into the alignment holes and allow magnets to connect.

2. Insert the rig bar latch locking bars into the receivers on the REM video panel.

3. Twist the spring knob on the rig bar latch by 90°, until it locks into place.

4. Twist the tightening knob clockwise until REM video panel is secure to the rig bar.

5. To detach the rig bar from the REM video panel, reverse the previous steps.

Warning! The magnetic attachments are not load-bearing, and are intended for alignment

assistance only. Do not release the video panel until the hanging hardware has been fully

secured.

Latch (x5)

Tightening knob

Spring knob

Locking bar

Rig Bar Latch

Vertical alignment

conical (x5)

Setup

REM-RB100CM IP User Manual Rev. 1

Clamp Attachment Bracket

To mount the REM-RB100CM IP overhead with standard Trusst clamps, follow the instructions under

Removing the Hoist Rings and replace the hoist rings with the included clamp attachment brackets.

For the Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.

Removing the Hoist Rings

To remove a hoist ring from the REM-RB100CM IP:

1. Remove the safety clip from the hoist pin.

2. Slide the hoist pin out of the hoist assembly.

3. To re-install the hoist ring or to install the included Clamp Attachment Bracket, reverse the

previous steps.

Take special care of the washers when removing and installing the hoist pin and hoist

ring. The fit between the assembly, washers, and ring is very tight.

Warning! Replacing the hoist ring with other hardware may change the load capacity of

the product!

Clamp

attachment

bracket

Mounting clamp

Hoist pin

Hoist ring

Safety clip

Washer (x2)

REM-RB100CM IP User Manual Rev. 1

Setup

Stacking

Stack video panels upon the REM-RB100CM IP when using with the Ground Support 2 Kit from Chauvet.

1. Insert alignment conicals into the alignment holes and allow magnets to connect.

2. Close the levers of the latches on the REM video panel.

3. To detach the rig bar from the REM video panel, reverse the previous steps.

Warning! The magnetic attachments are not load-bearing, and are intended for alignment

assistance only. Do not release the video panel until the hanging hardware has been fully

secured.

Vertical

alignment

conical (x4)

Latch

(x4)

Receivers

(For use with Ground Support 2 Kit)

TR16 screw jack

(10 included with

Ground Support 2 Kit)

Setup

REM-RB100CM IP User Manual Rev. 1

Stacking with Ground Support 2 Kit

For more information on how to use the REM-RB100CM IP with the Ground Support 2 Kit, download the

User Manual for the Ground Support 2 Kit from www.chauvetprofessional.com.

LatchesReceiver

TR16 screw jack

(10 included with

Ground Support 2 Kit)

Latch

Ground Support 2 Kit

*REM-RB50CM IP Curve shown for illustrative purposes

Andere Handbücher für REM-RB100CMIP

Inhaltsverzeichnis

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional ROGUEOUTCAST2HYBRID Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H18X Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAirPanel1IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional MAVERICK STOM 2 PROFILE Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir IP Panel 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H7X Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Panel Q40 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H12XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK3 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELL Gobo Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Q12 IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION-F-915-VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 FX-B Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Vesuvio RGBA Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional 91LEDs Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELL STX 360 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung