Chauvet Rogue R1 Beam Bedienungsanleitung

User Manual

Edition Notes

Rogue™ R1 Beam User Manual Rev. 2

Edition

Notes

The Rogue™ R1 Beam User Manual Rev. 2 covers the description, safety precautions,

installation, programming, operation, and maintenance of the Rogue™ R1 Beam. CHAUVET®

released this edition of the Rogue™ R1 Beam User Manual in June 2014.

Trademarks

CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or

Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted

triangle, and all other trademarks in this manual pertaining to services, products, or marketing

statements are owned or licensed by CHAUVET®. Any other

product names, logos, brands,

company names, and other trademarks featured or referred to within this document are the

property of their respective trademark holders.

CHAUVET® owns the content of this User Manual in its entirety, including but not limited to

pictures, logos, trademarks, and resources.

Electronically published by CHAUVET® in the United States of America.

Manual Use

CHAUVET® authorizes its customers to download and print this manual for professional

information purposes only. CHAUVET® expressly prohibits the u

sage, copy, storage,

distribution, modification, or printing of this manual or its content for any other purpose without

written consent from CHAUVET®.

Document

Printing

For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If

using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.

Intended

Audience

Any person in charge of installing, operating, and/or maintaining this product should completely

read through the guide that shipped with the product, as well as this manual, before installing,

operating, or maintaining this product.

Disclaimer

CHAUVET® believes that the information contained in this manual is accurate in all respects.

However, CHAUVET® assumes no responsibility for any errors or omissions in this document.

CHAUVET® reserves the right to revise and make changes to the content of this document

without obligation that CHAUVET® notify any person or company of such revision or changes.

This does not in any way constitute a commitment by CHAUVET® to make such changes.

CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.

Document

Revision

The Rogue™ R1 Beam User Manual Rev. 2 supersedes all previous versions of this manual.

Discard any older versions of this manual and replace with this version. Go to

www.chauvetprofessional.com for the latest version.

Author Date Editor Date

D. Couppe

6/4/14

A. Leon

6/4/14

Table of Contents

Rogue™ R1 Beam User Manual Rev. 2 -i-

Table of Contents

1. Before You Begin......................................................................................................................................1

What Is Included...........................................................................................................................................................1

Claims..........................................................................................................................................................................................1

Manual Conventions ....................................................................................................................................................................1

Symbols.......................................................................................................................................................................................1

Product At A Glance .....................................................................................................................................................2

Safety Notes .................................................................................................................................................................2

Personal Safety............................................................................................................................................................................2

Mounting And Rigging..................................................................................................................................................................2

Power And Wiring ........................................................................................................................................................................2

Operation.....................................................................................................................................................................................2

2. Introduction...............................................................................................................................................3

Description....................................................................................................................................................................3

Features........................................................................................................................................................................3

Overview.......................................................................................................................................................................4

Dimensions...................................................................................................................................................................5

3. Setup..........................................................................................................................................................6

AC Power......................................................................................................................................................................6

AC Plug........................................................................................................................................................................................6

Fuse Replacement.......................................................................................................................................................................6

DMX Linking..................................................................................................................................................................6

DMX Personalities........................................................................................................................................................................6

Gobo Wheel..................................................................................................................................................................7

Color Wheel..................................................................................................................................................................7

Lamp Replacement.......................................................................................................................................................8

Procedure ....................................................................................................................................................................................8

Procedure (Cont.).........................................................................................................................................................................9

Increasing the Lamp’s Life.........................................................................................................................................................10

Lamp Adjustment........................................................................................................................................................10

Mounting.....................................................................................................................................................................11

Orientation .................................................................................................................................................................................11

Rigging.......................................................................................................................................................................................11

Procedure ..................................................................................................................................................................................11

4. Operation.................................................................................................................................................12

Control Panel Description...........................................................................................................................................12

Control Options..........................................................................................................................................................................12

Programming..............................................................................................................................................................................12

Menu Map...................................................................................................................................................................13

Menu Map (Cont.).......................................................................................................................................................14

Menu Map (Cont.).......................................................................................................................................................15

Address.......................................................................................................................................................................16

Set the DMX Address................................................................................................................................................................16

Run Mode ...................................................................................................................................................................16

DMX Personality ........................................................................................................................................................................16

Auto Test....................................................................................................................................................................................16

Manual Test...............................................................................................................................................................................16

Setup...........................................................................................................................................................................17

Pan Reverse..............................................................................................................................................................................17

Tilt Reverse................................................................................................................................................................................17

Screen Reverse .........................................................................................................................................................................17

Pan Angle ..................................................................................................................................................................................17

Tilt Angle....................................................................................................................................................................................17

Table of Contents

-ii- Rogue™ R1 Beam User Manual Rev. 2

Pan and Tilt Movement BlackOut...............................................................................................................................................17

Color Movement BlackOut.........................................................................................................................................................17

Gobo Movement BlackOut.........................................................................................................................................................17

Lamp Settings............................................................................................................................................................................18

Maintenance Timer ....................................................................................................................................................................19

Reset Function...........................................................................................................................................................................19

Factory Reset Function..............................................................................................................................................................19

System Information.....................................................................................................................................................20

Offset Mode ................................................................................................................................................................20

Pan.............................................................................................................................................................................................20

Tilt..............................................................................................................................................................................................20

Dimmer 1 ...................................................................................................................................................................................20

Dimmer 2 ...................................................................................................................................................................................20

Gobo..........................................................................................................................................................................................20

Color ..........................................................................................................................................................................................20

Prism 1.......................................................................................................................................................................................20

Rotating Prism 1.........................................................................................................................................................................20

Prism 2.......................................................................................................................................................................................20

Rotating Prism 2.........................................................................................................................................................................20

Focus.........................................................................................................................................................................................20

DMX Values................................................................................................................................................................21

DMX Values (Cont.)....................................................................................................................................................22

DMX Values (Cont.)....................................................................................................................................................23

DMX Values (Cont.)....................................................................................................................................................24

DMX Values (Cont.)....................................................................................................................................................25

DMX Values (Cont.)....................................................................................................................................................26

5. Technical Information.............................................................................................................................27

Product Maintenance..................................................................................................................................................27

6. Technical Specifications.........................................................................................................................28

Returns .......................................................................................................................................................................29

Contact Us..................................................................................................................................................29

Before You Begin

Rogue™ R1 Beam User Manual Rev. 2 -1-

1. BEFORE YOU BEGIN

What Is

Included

•Rogue™ R1 Beam

•Neutrik® powerCON® power cord

•2 Omega brackets with mounting hardware

•Warranty Card

•Quick Reference Guide

Claims

Carefully unpack the product immediately and check the box to make sure all the parts are in

the package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from

shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure

to report damage to the carrier immediately may invalidate your claim. In addition, keep the box

and contents for inspection.

For other issues, such as missing components or p

arts, damage not related to shipping, or

concealed damage, file a claim with CHAUVET® within 7 days of delivery.

Manual

Conventions

Convention Meaning

1–512

A range of values in the text

50/60

A set of mutually exclusive values in the text

<SET>

A button on the product’s control panel

Settings

A product function or a menu option

MENU>Settings

A sequence of menu options

1–10

A range of menu values from which to choose in a menu

Yes/No

A set of two mutually exclusive menu options in a menu

A unique value to be entered or selected in a menu

Symbols

Meaning

Critical installation, configuration, or operation information. Failure to

comply with this information may cause the product not to work,

damage third-party equipment, or cause harm to the operator.

Important installation or configuration information. Failure to comply

with this information may keep the product from working.

Useful information.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Before You Begin

-2- Rogue™ R1 Beam User Manual Rev. 2

Product At A

Glance

Use on Dimmer

Auto Programs

Outdoor Use

Auto-Ranging Power

Supply

Sound-Activated

Replaceable Fuse

DMX

User-Serviceable

Master/Slave

Safety Notes

Read all the following Safety Notes before working with this product. These notes include

important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in this

User Manual will only apply to properly trained CHAUVET® certified technicians. Do

not open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

Personal Safety

•Avoid direct eye exposure to the light source while the product is on.

•Always disconnect this product from its power source before servicing.

•Always connect this product to a grounded circuit to avoid the risk of electrocution.

•Do not touch this product’s housing during operation because it may be very hot.

Mounting And

Rigging

•This product is for indoor use only! To prevent risk of fire or shock, do not expose this

product to rain or moisture. (IP20)

•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from

adjacent surfaces.

•This product weighs 38.8 lb (17.6 kg). Always ask for help when mounting this product to

avoid personal injuries or damage to the product.

•Make sure there are no flammable materials close to this product while it is operating.

•Always carry this product by the handles. Do not carry from the head.

•When hanging this product, always secure to a fastening device using a safety cable.

Power And

Wiring

•Always make sure you are connecting this product to the proper voltage in accordance

with the specifications in this manual or on the product’s specification label.

•Never connect this product to a dimmer pack or rheostat.

•Never disconnect this product by pulling or tugging on the power cable.

Operation

•Do not operate this product if you see damage to the housing, lenses, ultraviolet filter, or

cables. Have the damaged parts replaced by an authorized technician at once.

•Do not cover the ventilation slots when operating to avoid internal overheating.

•Do not aim this product toward the Sun. The lenses could concentrate the solar energy

and cause internal overheating.

•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a

higher temperature.

•In case of a serious operating problem, stop using this product immediately!

In the unlikely event that your CHAUVET® product may require service, contact

CHAUVET® Technical Support.

Introduction

Rogue™ R1 Beam User Manual Rev. 2 -3-

2. INTRODUCTION

Description

The Rogue™ R1 Beam is a compact, electronic, moving yoke beam product equipped with a

132-watt HRI lamp. It includes a color wheel with 14 colors plus white. It also includes 2

separate

5- and 8-facet rotating prisms, remote focus, and one gobo wheel with 17 static gobos plus open.

Features

•Compact, moving yoke beam fixture with a 2 prisms and motorized focus

•Uses an Osram Sirius 132-W lamp source with a rated 6,000-hour lamp life

•Precision-designed optics for hard-edged beam effects

•Extremely quiet for operation in any situation

•Fast and precise pan/tilt

•Color wheel:

•14 colors + Open (white)

•CTO - Split/linear colors

•Rainbow color spin at variable speed

•Gobo wheel:

•17 gobos + Open

•Gobo wheel spin at variable speed

•Variable frost

•Two prisms, 5-facet and 8-facet, independently controllable for gobo effects

•DMX channels: 15 or 19

•Pan: 540°

•Tilt: 270°

•Reset over DMX

•Electronic power supply

•Mechanical dimmer

•3- and 5-pin DMX input and output connectors

Introduction

-4- Rogue™ R1 Beam User Manual Rev. 2

Overview

Data In

Power In

Front View

Rear View

Power

Switch

Fuse

Data

Out

Control Panel

Handle

Top View

Side View

DMX In

DMX

Out

Introduction

Rogue™ R1 Beam User Manual Rev. 2 -5-

Dimensions

7.52 in

191 mm

8.27 in

210 mm

13.39 in

340 mm

14.17 in

360 mm

10.87 in

276 mm

11.10 in

282 mm

11.26 in

286 mm

4.53 in

115 mm

17.52 in

445 mm

Setup

-6- Rogue™ R1 Beam User Manual Rev. 2

3. SETUP

AC Power

Each Rogue™ R1 Beam has an auto-ranging power supply that works with an input voltage

range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Rogue™ R1

Beam, refer to the label affixed to the product. You can also refer to the Technical Specifications

chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more

information, you may download Sizing Circuit Breakers from the CHAUVET® website

www.chauvetlighting.com/download/pro.

Always connect this product to a protected circuit with an appropriate electrical ground

to avoid the risk of electrocution or fire.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The Rogue™ R1 Beam comes with a power input cord terminated with a Neutrik® powerCON®

A connector on one end and an Edison plug on the other end (U.S. market). If the power input

cord that came with your product has no plug, or if you need to change the Edison plug, use the

table below to wire the new plug.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live

Black

Brown

Yellow or Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Fuse

Replacement

1. Disconnect this product from the power outlet.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with a another fuse of the same type and rating

(F 5 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing a blown fuse. Always

replace the blown fuse with another of the same type and rating.

DMX Linking

You can link the Rogue™ R1 Beam to a DMX controller using a 3- or 5-pin DMX connection. If

using other DMX-compatible products with the Rogue™ R1 Beam

, you can control each

individually with a single DMX controller.

DMX

Personalities

The Rogue™ R1 Beam uses a 3- or 5-pin DMX data connection for the 15- and 19-channel

DMX personalities.

•Refer to the Introduction chapter for a brief description of each DMX personality.

•Refer to the Operation chapter to learn how to configure the Rogue™ R1 Beam to work in

these personalities.

•The DMX Values section provides you with detailed information regarding the DMX

personalities.

If you are not familiar with or need more information about DMX standards, Master/Slave

connectivity, or the DMX cables needed to link this product to a DMX controller,

download the DMX Primer from the CHAUVET® website:

www.chauvetlighting.com/download/pro.

Inhaltsverzeichnis

Andere Chauvet DJ- und Lichttechnik Handbücher

Chauvet

Chauvet S-PAR 1 Bedienungsanleitung

Beliebte DJ- und Lichttechnik Handbücher anderer Marken

Cameo

Cameo CLSERUM Bedienungsanleitung

Beamz

Beamz Atlas LED Double Derby DMX 6x3W Bedienungsanleitung

Future light

Future light MCF-200 Bedienungsanleitung

BoomToneDJ

BoomToneDJ Hyper Dream LED Bedienungsanleitung

Varytec

Varytec LED Par 64 Floor 5in1 15x10W RGBWA Bedienungsanleitung

EuroLite

EuroLite TG-5 Bedienungsanleitung

Techni-Lux

Techni-Lux BL-400S Bedienungsanleitung

Future light

Future light PLB-130 Pro-Head-Beam Bedienungsanleitung

EuroLite

EuroLite SMD 48 Bedienungsanleitung

ColorKey

ColorKey CKU01-2140 Bedienungsanleitung

Ledj

Ledj Slimline 229 IR Bedienungsanleitung

Techni-Lux

Techni-Lux DL-QUADBOX1630TC Bedienungsanleitung

Future light

Future light PRO Slim PAR-12 QCL RGBW/RGBA Bedienungsanleitung

BoomToneDJ

BoomToneDJ mushroom led Bedienungsanleitung

EuroLite

EuroLite LED TMH FE-1000 Bedienungsanleitung

ColorKey

ColorKey Mover MicroSpot Bedienungsanleitung

Allen + Roth

Allen + Roth 19535-000 Bedienungsanleitung

Robin

Robin Actor 3 ST Bedienungsanleitung