Chauvet COLORado Batten 144 Tour Bedienungsanleitung

Quick Reference Guide

English EN

Español ES

Français FR

Nederlands NL

COLORado™ Batten 144 Tour QRG EN

About this Guide

The COLORado™ Batten 144 Tour Quick Reference Guide (QRG) has basic

product information such as connection, mounting, menu options, and DMX

values. Download the User Manual from www.chauvetprofessional.com

for

more details.

Disclaimer

The information and specifications contained in this QRG are subject to change

without notice.

Safety Notes

•DO NOT open this product. It contains no user-serviceable parts.

•DO NOT look at the light source when the product is on.

•

To eliminate unnecessary wear and improve its lifespan, during periods

of non-use completely disconnect the product from power via breaker

or by unplugging it.

•CAUTION: When transferring product from extreme temperature

environments, (e.g. cold truck to warm humid ballroom) condensation

may form on the internal electronics of the product. To avoid causing a

failure, allow product to fully acclimate to the surrounding

environment before connecting it to power.

•CAUTION! This product’s housing is hot when lights are operating.

•Mount this product in a location with adequate ventilation, at least

20 in (50 cm) from adjacent surfaces.

•DO NOT leave any flammable material within 50 cm of this product

while operating or connected to power.

•USE a safety cable when mounting this product overhead.

•DO NOT operate this product outdoors or in any location where dust,

excessive heat, water, or humidity may affect it.

•DO NOT operate this product if the housing, lenses, or cables appear

damaged.

•DO NOT connect this product to a dimmer or rheostat.

•ONLY connect this product to a grounded and protected circuit.

•ONLY use the hanging/mounting bracket to carry this product.

•In the event of a serious operating problem, stop using immediately.

•The maximum ambient temperature is 104 °F (40 °C). Do not operate

this product at higher temperatures.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your

distributor to request support or return a product. Vi

sit

www.chauvetprofessional.com for contact information.

What Is

Included

•COLORado™ Batten 144 Tour

•Power Input Cord

•Glare Shield

•Warranty Card

•Quick Reference Guide

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100–240 VAC, 50/60 Hz.

To eliminate unnecessary wear and improve its lifespan, during periods of

non-use completely disconnect the product from power via breaker or by

unplugging it.

COLORado™ Batten 144 Tour QRG EN

Power Linking

You can link up to 3 COLORado™ Batten 144 Tour products at 120 VAC or

5 at 230 VAC. Power linking cords can be purchased separately.

AC Plug

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

Fuse

Replacement

1. Disconnect the product.

2. With a Phillips #2 head screwdriver, unscrew the fuse holder cap.

3. Remove the blown fuse and replace it with a good fuse of the same type

and rating.

4. Screw the fuse holder cap back in its place and reconnect power.

DMX Linking

The COLORado™ Batten 144 Tour will work with a DMX controller using a

regular DMX serial connection.

A DMX Primer is available from

www.chauvetprofessional.com.

DMX

Connection

The COLORado™ Batten 144 Tour uses a regular DMX data connection for its

DMX personalities: TOUR, BLOCK1, BLOCK2, ARC1, ARC1

+ D, ARC3,

ARC3 + D, ARC3 + S, and HSV

. See the User Manual to connect and configure

for DMX operation.

Master/Slave

Connection

The COLORado™ Batten 144 Tour uses the DMX data connection for its

Master/Slave mode. See the User Manual to connect and configure for

Master/Slave operation.

Mounting

Before mounting this product, read the Safety Notes. Make sure the mounting

clamp is capable of supporting the weight of the product. For our Chauvet line of

mounting clamps, go to trusst.com/productcategory/base-plates-accessories-

clamps/.

Product

Mounting

Diagram

Overhead Mounting

Floor Mounting

Mounting Clamp

Safety Cable

COLORado™ Batten 144 Tour QRG EN

Glare Shield

The COLORado™ Batten 144 Tour comes with a glare shield already mounted

on the side of the product. To extend the glare shield: First, loosen the glare

shield screw; next slide the shield until it is free; then reinsert the glare shield

into either slot so it

projects itself over the LEDs lens cover and retighten the

glare shield screw.

Control Panel

Description

Button Function

<MENU>

Exits from the current menu or function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function

<UP>

Navigates upwards through the menu list and increases the

numeric value when in a function

<DOWN>

Navigates downwards through the menu list and decreases

the numeric value when in a function

Passcode

After being prompted, enter the following passcode by pressing:

This passcode cannot be changed and must be used whenever prompted.

Folded Position

LEDs Lens Cover

Glare Shield

(extended)

LEDs Lens Cover

Glare Shield Slot

Extended Position

Glare Shield

(folded)

COLORado™ Batten 144 Tour QRG EN

Menu Options

Main Level Programming Levels Description

STATIC

RED

000–255 Combines red, green, blue, white, and

amber to make a custom color

GREN

BLUE

WHIT

AMBE

STRB

00–20

Selects the strobe frequency (0–20 Hz)

AUTO

01–10 Sp. 000–255

10 automatic programs

CUSTOM

10 customizable programs

ADDRESS

ADDR

001–512

Selects the DMX starting address

RUN

DMX

DMX mode

SLAVE

Master/Slave mode

PERSON

TOUR

10-channel: R/G/B, dimmer, strobe, color

macro, auto/custom, dimmer speed, auto

speed, ID addressing

ARC1

3-channel: R/G/B control

ARC1 + D

4-channel: R/G/B, dimmer

ARC 3

5-channel: RGBWA

ARC3 + D

6-channel: RGBWA + D

ARC3 + S

7-channel: RGBWA + D + S

BLOCK1

9-channel: RGB per block

BLOCK2

15-channel: RGBWA per block

HSV

3-channel: HSV control

EdIT CUSTOM

–

SCENE

–

RED

000–

255 Combines red, green, blue, white, and

amber, as well as strobe and timers to

create the scenes of a custom program

GREN

BLUE

WHIT

AMBE

STRB

00–

TIME

000–

255

FADE

SETTINGS

UPLOAD. ….

(Enter Passcode) Uploads custom programs to other

COLORado™ Batten 144 Tour

RESET

….

(Enter Passcode)

Defaults product to factory settings

DERR SAVE

All LEDs stay on the last command used

when the DMX signal is lost

BLAC

All LEDs turn off when DMX signal is lost

COLOR

OFF

RGB set to 255 = max. output

RGbw.

RGB set to 255 = balanced white

UC.

Universal color balance

DIMMER

OFF

No dimmer

dIM1.

Dimmer curve

dIM2.

dIM3.

dIM4.

COLORado™ Batten 144 Tour QRG EN

Menu Options (Cont.)

Main Level Programming Levels Description

CALIB1 WHITE 01–11

RED

000–255 Modifies the color macros used in the TOUR

personality

BLUE

GREN

WHIT

AMBE

CALIB2 RGB TO W

RED

000–255 Defines the color temperature used when

COLOR is set to RGbw.

GREN

BLUE

FANS

OFF

Selects the fan speed

LOW

NORMAL

HIGH

AUTO

KEY ON Turns the passcode on or off

OFF

DMX Values

TOUR

Channel

Function Value Percent/Setting

Dimmer

000 ó255

0–100%

Red

000 ó255

0–100% (Step Time if Auto 1–10 active)

Green

000 ó255

0–100% (Fade Time if Auto 1–10 active)

Blue

000 ó255

0–100%

White

000 ó255

0–100%

Amber

000 ó255

0–100%

7 Color Macro +

White Balance

000 ó010

011 ó030

031 ó050

051 ó070

071 ó090

091 ó110

111 ó130

131 ó150

151 ó170

171 ó200

201 ó205

206 ó210

211 ó215

216 ó220

221 ó225

226 ó230

231 ó235

236 ó240

241 ó245

246 ó250

251 ó255

No function

R: 100% G: 0–100% B: 0

R: 100%–0 G: 100% B: 0

R: 0 G: 100% B: 0–100%

R: 0 G: 100%–0 B: 100%

R: 0–100% G: 0 B: 100%

R: 100% G: 0 B: 100%–0

R: 100% G: 0–100% B: 0–100%

R: 100%–0 G: 100%–0 B: 100%

R/G/B/W/A: 100%

White 1

White 2

White 3

White 4

White 5

White 6

White 7

White 8

White 9

White 10

White 11

8 Strobe

000 ó009

010 ó255

No function

0–20 Hz

COLORado™ Batten 144 Tour QRG EN

TOUR

(Cont.)

Channel

Function Value Percent/Setting

9 Programs

000 ó010

011 ó020

021 ó030

031 ó040

041 ó050

051 ó060

061 ó070

071 ó080

081 ó090

091 ó100

101 ó110

111 ó120

121 ó130

131 ó140

141 ó150

151 ó160

161 ó170

171 ó180

181 ó190

191 ó200

201 ó210

211 ó220

221 ó230

231 ó240

241 ó250

251 ó255

No function

Fans off (stays on value for 3 sec)

Fans low (stays on value for 3 sec)

Fans high (stays on value for 3 sec)

Fans normal (stays on value for 3 sec)

Fans auto (stays on value for 3 sec)

Auto 1

Auto 2

Auto 3

Auto 4

Auto 5

Auto 6

Auto 7

Auto 8

Auto 9

Auto 10

Custom 1

Custom 2

Custom 3

Custom 4

Custom 5

Custom 6

Custom 7

Custom 8

Custom 9

Custom 10

Auto Speed

000 ó255

0–100% (only when using Auto/Custom)

11 Dimmer Speed

000

009

010 ó029

030 ó069

070 ó129

130 ó189

190 ó255

Preset dimmer speed from display menu

Linear dimmer

Nonlinear dimming curve 1 (fastest)

Nonlinear dimming curve 2

Nonlinear dimming curve 3

Nonlinear dimming curve 4 (slowest)

12 Block Selection

000 ó004

005 ó034

035 ó064

065 ó094

095 ó124

125 ó154

155 ó184

185 ó214

215 ó255

Blocks 1, 2 & 3

Block 1

Block 2

Block 3

Blocks 1 & 2

Blocks 2 & 3

Blocks 1 & 3

Blocks 1, 2 & 3

No function

COLORado™ Batten 144 Tour QRG EN

BLOCK1

Channel

Function Value Percent/Setting

Block 1 Red

000 ó255

0–100%

Block 1 Green

000 ó255

0–100%

Block 1 Blue

000 ó255

0–100%

Block 2 Red

000 ó255

0–100%

Block 2 Green

000 ó255

0–100%

Block 2 Blue

000 ó255

0–100%

Block 3 Red

000 ó255

0–100%

Block 3 Green

000 ó255

0–100%

Block 3 Blue

000 ó255

0–100%

BLOCK2

Channel

Function Value Percent/Setting

Block 1 Red

000 ó255

0–100%

Block 1 Green

000 ó255

0–100%

Block 1 Blue

000 ó255

0–100%

Block 1 White

000 ó255

0–100%

Block 1 Amber

000 ó255

0–100%

Block 2 Red

000 ó255

0–100%

Block 2 Green

000 ó255

0–100%

Block 2 Blue

000 ó255

0–100%

Block 2 White

000 ó255

0–100%

Block 2 Amber

000 ó255

0–100%

Block 3 Red

000 ó255

0–100%

Block 3 Green

000 ó255

0–100%

Block 3 Blue

000 ó255

0–100%

Block 3 White

000 ó255

0–100%

Block 3 Amber

000 ó255

0–100%

ARC1

Channel

Function Value Percent/Setting

Red

000 ó255

0–100%

Green

000 ó255

0–100%

Blue

000 ó255

0–100%

ARC1 + D

Channel

Function Value Percent/Setting

Dimmer

000 ó255

0–100%

Red

000 ó255

0–100%

Green

000 ó255

0–100%

Blue

000 ó255

0–100%

ARC3

Channel

Function Value Percent/Setting

Red

000 ó255

0–100%

Green

000 ó255

0–100%

Blue

000 ó255

0–100%

White

000 ó255

0–100%

Amber

000 ó255

0–100%

COLORado™ Batten 144 Tour QRG EN

ARC3 + D

Channel

Function Value Percent/Setting

Master Dimmer

000 ó255

0–100%

Red

000 ó255

0–100%

Green

000 ó255

0–100%

Blue

000 ó255

0–100%

White

000 ó255

0–100%

Amber

000 ó255

0–100%

ARC3 + S

Channel

Function Value Percent/Setting

Master Dimmer

000 ó255

0–100%

Red

000 ó255

0–100%

Green

000 ó255

0–100%

Blue

000 ó255

0–100%

White

000 ó255

0–100%

Amber

000 ó255

0–100%

7 Strobe

000 ó009

010

255

No function

0–20 Hz

HSV

Channel

Function Value Percent/Setting

Hue

000 ó255

0–100%

Saturation

000 ó255

0–100%

Value

000 ó255

0–100%

COLORado™ Batten 144 Tour GRR ES

Acerca de Esta

Guía

La Guía de Referencia Rápida (GRR) del COLORado™ Batten 144 Tour

contiene información básica sobre el producto, como montaje, opciones de

menú y valores DMX. Descargue el Manual de U

suario de

www.chauvetprofessional.com para una información más detallada.

Exención de

Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin previo aviso.

Notas de

Seguridad

•NO abra este producto. No contiene piezas reparables por el usuario.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Para evitar un desgaste innecesario y alargar su vida útil, desconecte

complemente el producto de la alimentación, mediante el interruptor o

desenchufándolo, durante los periodos en los que no se use.

•Cuidado: cuando transfiera el producto desde ambientes con

temperatura extrema (p. ej., del remolque frío de un camión a una sala

de baile con calor y humedad), puede formarse condensación en la

electrónica interna del producto. Para evitar que se produzca una avería,

deje que el producto se aclimate completamente al ambiente antes de

conectar la alimentación.

•¡CUIDADO! La carcasa de este producto está caliente cuando las luces

están en funcionamiento.

•Monte este producto en una ubicación con ventilación adecuada, al

menos a 20'' (50 cm) de superficies adyacentes.

•

NO deje ningún material inflamable a menos de 50 cm de este producto

mientras esté funcionando o conectado a la alimentación.

•USE un cable de seguridad cuando monte este producto en lo alto.

•NO ponga en funcionamiento este producto en el exterior o en

cualquier ubicación en la que el polvo, calor excesivo, agua o humedad

puedan afectarlo.

•

NO ponga en funcionamiento este producto si sospecha que la carcasa,

lentes o cables están dañados.

•NO conecte este producto a un atenuador o reostato.

•Conecte este producto SOLO a un circuito con toma de tierra y

protegido.

•Use SOLAMENTE los soportes de colgar/montar para mover este

producto.

•En caso de un problema grave de funcionamiento, deje de usarlo

inmediatamente.

•La máxima temperatura ambiente es de 104 °F (40 °C). No haga

funcionar este producto a temperaturas más altas.

Contacto

Fuera de EE.UU, Reino Unido, Irlanda, México, o Benelux, póngase en

contacto con su distribuidor para solicitar asistencia o devolver el producto.

Visite www.chauvetprofessional.com para información de contacto.

Andere Handbücher für COLORado Batten 144 Tour

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Scheinwerfer Handbücher

Chauvet

Chauvet Rogue R1 FX-B Bedienungsanleitung

Chauvet

Chauvet LED-RAIN36 Bedienungsanleitung

Chauvet

Chauvet COLORdash Accent Series Bedienungsanleitung

Chauvet

Chauvet Hurricane 700 Bedienungsanleitung

Chauvet

Chauvet SlimPAR HEX 3 IRC Bedienungsanleitung

Chauvet

Chauvet Cyborg CH-258 Bedienungsanleitung

Chauvet

Chauvet PowerStream 4 Bedienungsanleitung

Chauvet

Chauvet Colorado 1-Quad Tour Bedienungsanleitung

Chauvet

Chauvet COLORrail IRC IP Bedienungsanleitung

Chauvet

Chauvet Pocketspot LED Bedienungsanleitung

Chauvet

Chauvet HURRICANE 1100 Bedienungsanleitung

Chauvet

Chauvet The Intimidator Scan LED 200 Bedienungsanleitung

Chauvet

Chauvet COLORado 4 IP Bedienungsanleitung

Chauvet

Chauvet SlimBANK Bedienungsanleitung

Chauvet

Chauvet Nexus Bedienungsanleitung

Chauvet

Chauvet Q-WASH 560Z-LED Bedienungsanleitung

Chauvet

Chauvet LXW Bedienungsanleitung

Chauvet

Chauvet COLORband PiX Bedienungsanleitung

Chauvet

Chauvet SX Mix Bedienungsanleitung

Chauvet

Chauvet COLORado Panel Bedienungsanleitung

Chauvet

Chauvet Colordash Par-Tri Bedienungsanleitung

Chauvet

Chauvet COLORado Ridge IP Bedienungsanleitung

Chauvet

Chauvet LEDRain 56C Bedienungsanleitung

Chauvet

Chauvet Rogue R1 FX-B Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung