Chauvet Intimidator Barrel LED 300 Bedienungsanleitung

Quick Reference Guide

Intimidator™ Barrel LED 300 QRG EN

Page 2 of 72

About This

Guide

The Intimidator™ Barrel LED 300 Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values. Download

the User Manual from www.chauvetlighting.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change

without notice.

Safety Notes

These Safety Notes include important safety information about installation, usage,

and maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power cord by pulling or tugging on the

cord.

•When mounting this product overhead, use a safety cable.

•DO NOT allow flammable materials close to the unit while operating.

•

DO NOT touch this product when it is operating because it may be hot.

•The voltage of the outlet to which you are connecting this product must be

within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or shock,

do not expose this product to rain or moisture.

•Always mount

this product in a location with adequate ventilation, at least

20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with the same type and rating.

•ONLY use the hanging/mounting bracket or the handles to carry this product.

•The maximum ambient temperature is 104° F (40° C). Do not operate this

product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•DO NOT open this product. It contains no user-serviceable parts.

Contact

Outside the U.S., UK, or Ireland, contact your distributor to request support or

return a product. Visit www.chauvetlighting.com for contact information.

What Is

Included

•One Intimidator™ Barrel LED 300

•One Power Cord

•One Warranty Card

•One Quick Reference Guide

To Begin

Unpack your Intimidator™ Barrel LED 300 and make sure you have received all

parts in good condition. If the box or contents appear damaged, notify the carrier

immediately, not CHAUVET®.

EN Intimidator™ Barrel LED 300 QRG

Page 3 of 72

Product

Description

The Intimidator™ Barrel LED 300 is a bright, compact LED barrel that contains 7

interchangeable, rotating gobos and 8 separate colors. Built-in movement macros

and move-in-

black features minimize programming time. High frequency LED

dimming allows for flicker-free operation, and the motorized focus allows gobos

to be crisp at any distance.

Product Overview

AC Power

This product has a switchable power supply that can work with an input voltage of

120 VAC, 60 Hz or 230 VAC, 50 Hz.

Power Linking

You can link up to 3 Intimidator™ Barrel LED 300 units at 120 VAC and 7 units

at 230 VAC. You should never exceed this number.

Fuse

Replacement

1. Disconnect the product from power.

2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.

3. Remove the blown fuse from the holder and replace with a fuse of the exact

same type and rating.

4. Re-insert the fuse holder and reconnect power.

Power Out

DMX Out

Power In

DMX In

Fuse Holder

Voltage Switch

Intimidator™ Barrel LED 300 QRG EN

Page 4 of 72

Mounting

Before mounting this product, read the SafetyNotes.

Product

Mounting

Diagram

Control Panel

Description

Button Function

<MENU>

Exits from the current menu or function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function

<UP>

Navigates upwards through the menu list and increases the

numeric value when in a function

<DOWN>

Navigates downwards through the menu list and decreases the

numeric value when in a function

Menu Options

Main Level Programming Levels Description

DMX Address

001~512

Sets the DMX starting address

Operation Modes

SLAv (Son)

Slave operating mode

NStS (SrUn)

Sound-Active Mode

NAFA (FASt)

Automatic Mode, Fast Program

NASl (SLoU)

Automatic Mode, Slow Program

Pan

Normal Pan

PAn

Normal Pan operation

Inverse Pan

rPan

Inverse Pan operation

Display

Normal Display

Dis

Change the LCD display text position

Inverse Display

rDis

Channel Mode

11-Channel Mode

11CH

Selects the DMX personality

8-Channel Mode

8CH

Reset

rESt

Resets fixture

Load

LoAd

Load factory defaults

Bracket Adjustment

Knob

Mounting Bracket

EN Intimidator™ Barrel LED 300 QRG

Page 5 of 72

DMX Linking

The Intimidator™ Barrel LED 300 can work with a DMX controller when linked

by DMX serial connections.

Instructions for connecting and configuring this

product for DMX operation are in the User Manual.

If you are not familiar with

DMX, download the DMX Primer from www.chauvetlighting.com.

Starting Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 502.

Master/Slave

Connection

The Intimidator™ Barrel LED 300 uses the DMX data connection for its

Master/Slave mode. Instructions for

connecting and configuring this product for

Master/Slave operation are in the User Manual.

DMX Values

11-CH

Channel

Function Value Percent/Setting

Pan

000 255

0~180°

Tilt

000 255

0~90°

3 Color

000 006

White

007 013

Yellow

014 020

Pink

021 027

Green

028 034

Red

035 041

Light Blue

042 048

Kelly Green

049 055

Orange

056 063

Dark Blue

064 070

White + Yellow

071 077

Yellow + Pink

078 084

Pink + Green

085 091

Green + Red

092 098

Red + Light Blue

099 105

Light Blue + Kelly Green

106 112

Kelly Green + Orange

113 119

Orange + Dark Blue

120 127

Dark Blue + White

128 191

Rotate clockwise (slow to fast)

192 255

Rotate counter clockwise (slow to fast)

4 Shutter

000 003

Closed

004 007

Open

008 215

Strobe effect with increasing speed

216 255

Open

5 Dimmer 000 255 0~100%

Intimidator™ Barrel LED 300 QRG EN

Page 6 of 72

DMX Values(continued)

11-CH

Channel

Function

Value

Percent/Setting

6 Gobo Wheel

064 071

Gobo 7 shake, from slow to fast

072 079

Gobo 6 shake, from slow to fast

080 087

Gobo 5 shake, from slow to fast

088 095

Gobo 4 shake, from slow to fast

096 103

Gobo 3 shake, from slow to fast

104 111

Gobo 2 shake, from slow to fast

112 119

Gobo 1 shake, from slow to fast

120 127

Open

128 191

Cycle effect with increasing speed

192 255

Reverse cycle effect with increasing speed

7 Gobo Rotation

000 015

Indexing

016 127

Rotation effect with increasing speed

128 239

Reverse rotation effect with increasing speed

240 255

Gobo bounce

8 Prism

000 003

Open

004 255

Prism on

Focus

000 255

0~100%

10 Control Functions

000 007

No function

008 015

Blackout while pan/tilt moving

016 023

Disable blackout while pan/tilt moving

024 031

Blackout while moving color wheel

032 039

Disable blackout while moving color wheel

040 047

Blackout while moving gobo wheel

048 055

Disable blackout while moving gobo wheel

056 087

No function

088 095

Disable blackout while moving all options

096 103

Reset pan/tilt

104 111

No function

112 119

Reset color wheel

120 127

Reset gobo wheel

128 135

No function

136 143

Reset prism

144 151

Reset focus

152 159

Reset all

160 255

No function

11 Movement Macro

000 007

No function

008 135

Movement macros 1-8

136 255

Sound-Active programs 1-8

EN Intimidator™ Barrel LED 300 QRG

Page 7 of 72

DMX Values

(continued)

8-CH

Channel

Function Value Percent/Setting

Pan

000 255

0~180°

Tilt

000 255

0~90°

3 Color

000 006

White

007 013

Yellow

014 020

Pink

021 027

Green

028 034

Red

035 041

Light Blue

042 048

Kelly Green

049 055

Orange

056 063

Dark Blue

064 070

White + Yellow

071 077

Yellow + Pink

078 084

Pink + Green

085 091

Green + Red

092 098

Red + Light Blue

099 105

Light Blue + Kelly Green

106 112

Kelly Green + Orange

113 119

Orange + Dark Blue

120 127

Dark Blue + White

128 191

Rotate clockwise (slow to fast)

192 255

Rotate counter clockwise (slow to fast)

4 Shutter

000 003

Closed

004 007

Open

008 215

Strobe effect with increasing speed

216 255

Open

5 Gobo Wheel

064 071

Gobo 7 shake, from slow to fast

072 079

Gobo 6 shake, from slow to fast

080 087

Gobo 5 shake, from slow to fast

088 095

Gobo 4 shake, from slow to fast

096 103

Gobo 3 shake, from slow to fast

104 111

Gobo 2 shake, from slow to fast

112 119

Gobo 1 shake, from slow to fast

120 127

Open

128 191

Cycle effect with increasing speed

192 255

Reverse cycle effect with increasing speed

Intimidator™ Barrel LED 300 QRG EN

Page 8 of 72

DMX Values

(continued)

8-CH

Channel

Function

Value

Percent/Setting

6 Gobo Rotation

000 015

Indexing

016 127

Rotation effect with increasing speed

128 239

Reverse rotation effect with increasing

speed

240 255

Gobo bounce

7 Prism

000 003

Open

004 255

Prism on

Focus

000 255

0~100%

ES Intimidator™ Barrel LED 300 QRG

Page 9 of 72

Acerca de Esta

Guía

La Guía de Referencia Rápida (GRR) del Intimidator™ Barrel LED 300

contiene información básica sobre el producto, como montaje, opciones de

menú y valores DMX. Descargue el Manual de U

suario de

www.chauvetlighting.com para una información más detallada.

Exención de

Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas

a cambio sin previo aviso.

Notas de

Seguridad

Estas Notas de Seguridad incluyen información de seguridad

importante

sobre el montaje, uso y mantenimiento.

•Este producto no está concebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y

protegido.

•Desconecte siempre de la alimentación antes de la limpieza o

sustitución del fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Asegúrese de que el cable de alimentación no está retorcido ni

estropeado.

•Nunca desconecte este producto del cable de alimentación

agarrando o tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la

unidad cuando esté en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues

podría estar caliente.

•La tensión del enchufe al que conecte este producto ha de estar en

el rango establecido en el grabado o en el panel posterior de

producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para

evitar riesgos de incendio o descarga, no exponga este producto a la

lluvia o la humedad.

•Monte siempre este producto en una ubicación con ventilación

adecuada, al menos a 20'' (50 cm) de superficies adyacentes.

•

Asegúrese de que ninguna ranura de ventilación en la carcasa de la

unidad queda bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para

mover este producto.

•La máxima temperatura ambiente es de 104º F (40º C). No haga

funcionar este producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo

inmediatamente.

•NO abra este producto. No contiene piezas reparables por el

usuario.

Intimidator™ Barrel LED 300 QRG ES

Page 10 of 72

Contacto

Fuera de EE.UU, Reino Unido o Irlanda, póngase en contacto con su

distribuidor para solicitar asistencia o devolver el producto. Visite

www.chauvetlighting.com para información de contacto.

¿Qué Va

Incluido?

•Un Intimidator™ Barrel LED 300

•Un cable de alimentación

•Una tarjeta de garantía

•Una Guía de Referencia Rápida

Para Empezar

Desembale su Intimidator™ Barrel LED 300 y asegúrese de que ha recibido

todas las partes en buen estado. Si la caja o los componentes parecen dañados,

notifíqueselo al transportista inmediatamente, no a CHAUVET®.

Descripción

del Producto

El Intimidator™ Barrel LED 300 es un barril LED compacto y brillante que

contiene 7 gobos giratorios intercambiables y 8 colores independientes. Las

características de macros de movimiento integrados y "move-in-black"

minimizan el tiempo de programación La atenuación LED

de alta frecuencia

permite un funcionamiento sin parpadeos, y el foco con motor consigue que los

gobos se vean nítidos a cualquier distancia.

Visión General del

Producto

Salida DMX

Entrada de

Alimentación

Portafusibles

Conmutador de

Tensión

Salida de

Alimentación

Entrada DMX

Andere Handbücher für Intimidator Barrel LED 300

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Scheinwerfer Handbücher

Chauvet

Chauvet GigBAR IRC Bedienungsanleitung

Chauvet

Chauvet Nexus Aq 5x5 Bedienungsanleitung

Chauvet

Chauvet COLORado Ridge IP Bedienungsanleitung

Chauvet

Chauvet Cubix 2.0 Bedienungsanleitung

Chauvet

Chauvet Firebird LED Bedienungsanleitung

Chauvet

Chauvet Q-Spot 560-LED Bedienungsanleitung

Chauvet

Chauvet 4 Bar Flex Bedienungsanleitung

Chauvet

Chauvet Gobo Zoom LED 2.0 Bedienungsanleitung

Chauvet

Chauvet The Intimidator Scan LED 200 Bedienungsanleitung

Chauvet

Chauvet LED PAR 38-18UVB Bedienungsanleitung

Chauvet

Chauvet Abyss Led Bedienungsanleitung

Chauvet

Chauvet COLORdash Par-Quad 18 Bedienungsanleitung

Chauvet

Chauvet ORB Bedienungsanleitung

Chauvet

Chauvet COLORdash Batten-Quad 6 Bedienungsanleitung

Chauvet

Chauvet BEAMSHOT Bedienungsanleitung

Chauvet

Chauvet Intimidator Scan 305 IRC Bedienungsanleitung

Chauvet

Chauvet Colordash Bedienungsanleitung

Chauvet

Chauvet Colorrail IRC Bedienungsanleitung

Chauvet

Chauvet SlimPAR HEX 6 IRC Bedienungsanleitung

Chauvet

Chauvet COLORado 1 Tour Bedienungsanleitung

Chauvet

Chauvet 4 Bar Flex Bedienungsanleitung

Chauvet

Chauvet Rotating Moons CH-208 Bedienungsanleitung

Chauvet

Chauvet Intimidator Barrel LED 300 Bedienungsanleitung

Chauvet

Chauvet Hurricane 700 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung