Chauvet Intimidator COLOR LED Bedienungsanleitung

User Manual

Page 2 of 17 Intimidator™ Wash LED 150 User Manual Rev. 5

TABLE OF CONTENTS

1. Before You Begin.............................................................................................................3

Safety Notes ................................................................................................................................4

2. Introduction......................................................................................................................5

Product Overview.........................................................................................................................5

Product Dimensions.....................................................................................................................6

3. Setup.................................................................................................................................7

AC Power.....................................................................................................................................7

Mounting......................................................................................................................................8

4. Operation..........................................................................................................................9

Control Panel Operation...............................................................................................................9

Menu Map....................................................................................................................................9

Hidden Menu Map......................................................................................................................10

Configuration (DMX)...................................................................................................................11

Configuration (Standalone Modes) .............................................................................................11

DMX Channel Assignments and Values......................................................................................13

5. Maintenance...................................................................................................................15

General Maintenance.................................................................................................................15

6. Technical Specifications ...............................................................................................16

Intimidator™ Wash LED 150 User Manual Rev. 5 Page 3 of 17

1.BEFORE YOU BEGIN

What Is

Included

•Intimidator™ Wash LED 150

•Power Cord •Warranty Card

•Quick Reference Guide

Unpacking

Instructions

Carefully unpack the product immediately

and check the container to make sure all the

parts are in the package and are in good condition.

Claims If the box or the contents (the product and

included accessories) appear damaged from

shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®.

Failure to report damage to the carrier immediately may invalidate your claim. In

addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping,

or concealed damage, file a claim with CHAUVET® within 7 days of delivery.

Text

Conventions

Convention Meaning

1–512

A range of values

50/60

A set of values of which only one can be chosen

Settings

A menu option not to be modified

Menu > Settings

A sequence of menu options to be followed

<ENTER>

A key to be pressed on the product’s control panel

A value to be entered or selected

Symbols

Symbol Meaning

Critical installation, configuration, or operation information. Not

following these instructions may make the product not work, cause

damage to the product, or cause harm to the operator.

Important installation or configuration information. The product

may not function correctly if this information is not used.

Useful information.

Disclaimer The information and specifications contained in this User Manual

are subject to change

without notice. CHAUVET® assumes no responsibility or liabil

ity for any errors or

omissions, and reserves the right to revise or recreate this manual at any time.

Download the latest version from www.chauvetlighting.com.

Electronically published by CHAUVET® in the United States of America.

Author

Date

Editor

Date

A. Leon 06/11/13 T.Yeago 06/17/13

Page 4 of 17 Intimidator™ Wash LED 150 User Manual Rev. 5

Safety Notes

These notes include important information about the mounting, usage, and

maintenance of this product; read before using the product.

•

Always connect the product to a grounded circuit to avoid the risk of electrocution.

•Always disconnect the product from the power source before cleaning or replacing the fuse.

•Avoid direct eye exposure to the light source while the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect the product from power by pulling or tugging on the cord.

•If mounting the product overhead, always secure to a fastening device using a safety cable.

•Make sure there are no flammable materials close to the product when operating.

•

Do not touch the product’s housing when operating because it may be very hot.

•Always make sure that the voltage of the outlet to which you are connecting the product is within

the range stated on the decal or rear panel of the product.

•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the

product to rain or moisture.

•Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from

adjacent surfaces.

•Be sure that no ventilation slots on the product’s housing are blocked.

•Never connect the product to a dimmer.

•Make sure to replace the fuse with another of the same type and rating.

•Never carry the product from the power cord or any moving part. Always use the

hanging/mounting bracket or the handles.

•The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher

temperatures.

•In the event of a serious operating problem, stop using the product immediately.

•Never try to repair the product. Repairs carried out by unskilled people can lead to damage or

malfunction. Contact the nearest authorized technical assistance center.

•

This product is not intended for permanent installation.

•Keep this User Manual for future use. If you sell the product to another user, be sure to give this

document to the next owner.

Intimidator™ Wash LED 150 User Manual Rev. 5 Page 5 of 17

2.INTRODUCTION

Product Overview

DMX in

DMX out

Power in

Power out

Fuseholder

Menu Display

Fan

Back Panel

Front Panel

Page 6 of 17 Intimidator™ Wash LED 150 User Manual Rev. 5

Product Dimensions

Intimidator™ Wash LED 150 User Manual Rev. 5 Page 7 of 17

3.SETUP

AC Power

This product has an auto-ranging power supply and it can work with an input voltage

range of 100~240 VAC, 50/60 Hz.

To determine the power requirements for a particular fixture, see the label affixed to

the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s

listed current rating indicates its average current draw under normal conditions.

Always connect this product to a protected circuit

(circuit breaker or fuse),

making sure that it has

an appropriate electrical ground to avoid the risk of

electrocution or fire.

Never connect this product to

a rheostat (variable resistor) or dimmer circuit,

even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Power Linking

This fixture provides power linking via the Edison outlet located in the back of the unit.

Please see the diagram below for further explanation.

Power Linking

Diagram

You can power link up to 12 Intimidator™ Wash LED 150 units on 120 VAC or

up to 21 Intimidator™ Wash LED 150 units on 230 VAC.

The power linking diagram shown above corresponds to the North American

version of this product ONLY! If using this product in other markets, you must

consult with the local CHAUVET® distributor as power linking connectors and

requirements may differ in your country or region.

1st Product

2nd Product

3rd Product

Other fixtures

Page 8 of 17 Intimidator™ Wash LED 150 User Manual Rev. 5

Mounting

Orientation

The Intimidator™ Wash LED 150 may be mounted in any position, provided there is

adequate room for ventilation around it.

Rigging

Be sure that the structure onto which you are mounting this product can support its

weight. Please see the “Technical Specifications” section of this manual for weight

information.

Make sure to mount the fixture securely to a rigging point, whether an elevated

platform or a truss.

When rigging this product onto a truss, you should use a mounting clamp of

appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for

this purpose.

When mounting this product overhead, always use a safety cable.

Before deciding on a location for this product, always make sure that it will be easy to

access the unit for maintenance and programming purposes.

When power linking multiple fixtures, you must

always consider the length of the

power linking cable and mount the fixtures close enough for the cable to reach them.

Mounting Diagram

Bracket

attachment

Rubber feet (4)

Safetybolt

attachment

Bottom of fixture

Intimidator™ Wash LED 150 User Manual Rev. 5 Page 9 of 17

4.OPERATION

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display.

Button

Function

<MODE/ESC> Press to find an operation mode or to

back out of the current menu option

<UP> Press to scroll down the list of options

or to find a higher value

<DOWN> Press to scroll up the list of options or

to find a lower value

<ENTER> Press to activate a menu option or a

selected value

Menu Map

Mode Programming Steps Description

DMX Mode d*** d001~512 Selects the DMX starting address

Operating

Mode

NASL

SLoU

Automatic slow

NAFA FASt Automatic fast

NStS SrUn Sound-active mode

SLAU

SonU

Slave mode

Pan Invert Standard pan PAN Reverse the pan direction

Inverted pan rPAN

Tilt Invert Standard tilt tit Reverse the tilt direction

Inverted tilt

rtit

Display Invert Standard display dis Use this function for hanging the product

upside down

Inverted display rdis

Personality

Advanced

15CH

Select the DMX personality

Basic 6CH

Pan Range

Pan 540° PA54

Select the maximum pan range

Pan 360°

PA36

Pan 180° PA18

Tilt Range

Tilt 270° ti27

Select the maximum tilt range

Tilt 180° ti18

Tilt 90° ti 9

Reset System reset rESt Reset all motors

Load Factory

Defaults Load default LoAd Use this to revert all settings for the fixture

back to the factory-defaults values

Page 10 of 17 Intimidator™ Wash LED 150 User Manual Rev. 5

Hidden Menu Map

This fixture has a hidden menu. The purpose of this menu is to adjust the home position

(electronic adjustment) of the attributes listed below.

Mode Programming Steps Description

Pan adjustment P*** P000~255 Adjust the pan home position

Tilt adjustment t*** t000~255 Adjust the tilt home position

Accessing the Hidden Menu Map

1) Press and hold <MODE/ESC> for at least 10 seconds.

2) Use <UP> or <DOWN> to input the following access code: 2323.

3) Press <ENTER>.

Andere Handbücher für Intimidator COLOR LED

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chauvet Leuchte Handbücher

Chauvet

Chauvet LED-PALET Handbuch

Chauvet

Chauvet eclipse Bedienungsanleitung

Chauvet

Chauvet LEG-5000 Bedienungsanleitung

Chauvet

Chauvet MiN Spot RGBW Bedienungsanleitung

Chauvet

Chauvet ILS-625DCR Bedienungsanleitung

Chauvet

Chauvet LEG-6000 Handbuch

Chauvet

Chauvet LED-PANEL4 Bedienungsanleitung

Chauvet

Chauvet ROGUE RH1 Hybrid Bedienungsanleitung

Chauvet

Chauvet F-40 Bedienungsanleitung

Chauvet

Chauvet Intimidator Wash Zoom 350 IRC Bedienungsanleitung

Chauvet

Chauvet Rogue r2 Beam Bedienungsanleitung

Chauvet

Chauvet intimidator scan led 100 Bedienungsanleitung

Chauvet

Chauvet Intimidator Color DMX-500 Bedienungsanleitung

Chauvet

Chauvet DMX-690 Bedienungsanleitung

Chauvet

Chauvet DMX-685 Bedienungsanleitung

Chauvet

Chauvet SlimPAR 64 RGBA Bedienungsanleitung

Chauvet

Chauvet Elan Bedienungsanleitung

Chauvet

Chauvet MiN Spot Bedienungsanleitung

Chauvet

Chauvet Intimidator Spot DMX-680 Bedienungsanleitung

Chauvet

Chauvet COLORado 6 Bedienungsanleitung

Chauvet

Chauvet LED-BANK4 Bedienungsanleitung

Chauvet

Chauvet Rogue R1 Bedienungsanleitung

Chauvet

Chauvet COLORsplash JR LED-PAR83 Bedienungsanleitung

Chauvet

Chauvet PAR38US Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung