Chauvet Q-WASH 260-LED Bedienungsanleitung

Quick Reference Guide

Q-Wash 260-LED QRG

Page 2 of 10

About this

Guide

The Q-Wash 260-LED Quick Reference Guide (QRG) only contains

the product’s connection and mounting information, as well as the

menu options and the DMX values.

Disclaimer

This Quick Reference Guide DOES NOT replace the product’s

User Manual.

Make sure to download the latest version of the product’s User

Manual from (www.chauvetlighting.com).

You must read ALL the disclaimers and safety notes in this

document as well as those in the product’s User Manual before

installing, operating, or maintaining this product.

Safety Notes DO NOT open this product unless instructed. It contains no user

serviceable parts.

DO NOT look at the light source when this product is on.

DO NOT touch the product when it is operating because it may

be hot.

DO NOT cover the ventilation slots when the product is

operating to avoid internal overheating.

DO NOT install or operate this product where there is less than

50 cm to the nearest surface to allow adequate ventilation around

it.

DO NOT leave any flammable material within 50 cm from this

product while operating or connected to the power outlet to

minimize the risk of fire.

DO NOT carry this product from the head. Use the handles

instead.

DO NOT mount this product overhead without using a safety

cable.

DO NOT operate this product outdoors or in any location where

dust, excessive heat, water, or humidity may affect it.

DO NOT operate this product if you see damage on the housing,

lenses, or cables. In any of these cases, have the damaged parts

replaced by an authorized technician at once.

DO NOT connect this product to a dimmer or rheostat.

ONLY connect this product to a grounded and protected circuit.

What is

Included

One Q-Wash 260-LED

One locking IEC to Edison plug input power cord (US market)

Two hanging brackets

Four M8 bolts (6 mm head)

One safety cable

One custom cut, removable 1° Color Blending Filter

One Warranty Card

One Quick Reference Guide

Q-Wash 260-LED QRG

Page 3 of 10

Features

Operating modes:

9-channel: Pan, tilt, red, green, blue, color/macros, dimmer,

strobe, control

13-channel: Pan, pan fine, tilt, tilt fine, pan/tilt speed, red,

green, blue, color/macros, dimmer, strobe, and

control

Pan: 540

Tilt: 270

RGB static color mixing with or without DMX control

Electronic strobe (1~20 Hz)

Electronic dimmer (0~100%)

High power setting

Remote product reset and vector speed channel

Auto programs

Sound activated programs

255-step fully customizable program

Recall auto or custom programs via control panel or DMX

Color temperature presets (3,200~10,000 K)

Color calibration

Fan speed control

3-pin DMX input and output connectors

LCD screen with password protection

Product

Description

The Q-Wash 260-LED is an RGB LED wash moving head with

multiple narrow beams. The product consists of a base and a moving

head on a yoke. The LEDs are inside ducts, which, along with

special optics, provide a very narrow beam angle.

ProductOverview

FrontPanel

Rear Panel

PowerSwitch

PowerInput

ControlPanel LCD

DMXIn/Out FuseHolder

Q-Wash 260-LED QRG

Page 4 of 10

AC Power

This product has an auto-ranging power supply that can work with

an input voltage range of 100~240 VAC, 50/60 Hz.

Fuse

Replacement

1. Wedge the tip of a flat head screwdriver into the slot of the fuse

holder and pry the safety cap out of its housing. It will pull the

installed fuse with it.

2. Remove the blown fuse from its safety cap and replace it with a

fuse of the exact same type and rating (F 3.15 A, 250 V).

3. Insert the fuse holder back into its place, and reconnect power.

DMX Linking

The Q-Wash 260-LED can work with a DMX controller using a

regular DMX serial connection.

If you are not familiar with the DMX standard, please download the

DMX Primer document from www.chauvetlighting.com.

DMX Connection

The Q-Wash 260-LED uses a regular DMX data connection for

DMX personalities, BASIC, and ADVANCED.

Download the Q-Wash 260-LED User Manual and refer to the Setup

chapter to learn how to connect this product for DMX operation, and

the Operation chapter to learn in detail how to configure this product

for DMX operation.

Master/Slave

Connection

The Q-Wash 260-LED uses the DMX data connection for its

Master/Slave mode.

Download the Q-Wash 260-LED User Manual and refer to the Setup

chapter to learn how to connect this product for Master/Slave

operation, and the Operation chapter to learn in detail how to

configure this product for Master/Slave operation.

Mounting

Before mounting this product, read the safety notes at the beginning

of this guide and on page 2 of the product’s User Manual. Then,

follow the mounting procedure indicated in the Setup chapter of the

User Manual.

Product

Mounting

Diagram

Safetycable(included)

Cclamps (notincluded)

FloorStandingOverheadMounting

Mountingbrackets(included)

Q-Wash 260-LED QRG

Page 5 of 10

Programming For details on how to program this product, please refer to the

product’s User Manual.

Control Panel

Description

Button Function

<MENU> Exits from the current menu or function

<ENTER> Enables the currently displayed menu or sets the

currently selected value into the selected function

<UP> Navigates upwards through the menu list and

increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list and

decreases the numeric value when in a function

Password After being prompted to enter the password, press:

<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.

Start Address To ensure full access to all channels in each DMX mode, the

highest recommended DMX addresses are as follows:

Mode Address Mode Address

BASIC 504 ADVANCED 500

Editing Notes When in EDIT and CALIB modes, <UP> and <DOWN> only

change the value of the selected option.

To move to the next option press <ENTER> repeatedly. Refer

to the

Q-Wash 260-LED User Manual for more details.

Q-Wash 260-LED QRG

Page 6 of 10

Menu Options

1st Level Programming Levels Description

INTRO

ADDRESS 001~512 Selects a starting DMX address

RESET NO/YES Resets the

roduct’s custom settings

FANS

HIGH Select the fan’s operation mode.

NOTE: Fixture’s controller will force the fan to High if the

product’s internal temperature becomes too high, despite any

manual or DMX setting

NORMAL

LOW

AUTO

RUN

DMX512 Selects DMX running mode

AUTO1 Selects the first automatic program

AUTO2 Selects the second automatic program

CUSTOM Selects the user customizable program

SOUND1 Selects the first sound program

SOUND2 Selects the second sound program

SLAVE Selects the Slave running mode

TEST Starts the product’s test sequence

CHANNELS BASIC Selects the 9-channel DMX mode

ADVANCED Selects the 12-channel DMX mode

DISPLAY 60 CLOSE Turns off the display after 60 seconds

BRIGHT Keeps the display on

KEYLOCK NO/YES Activates/deactivates the control panel password

DIMMER DIMMER 4~1 Slow (DIM 4) to fast (DIM1) dimmer curves

DIMMER 0 Linear dimmer

INFO EDITION Shows the version of the installed S/W

INVERT

PAN NORMAL/

REVERSE

Defines the pan direction

TILT Defines the tilt direction

DIMMER Defines the direction of the dimmer fader

USE NO/YES Activates the changes

RANGE

P/START

000~255

Sets the pan start point (restricted range)

P/FINISH Sets the pan end point (restricted range)

T/START Sets the tilt start point (restricted range)

T/FINISH Sets the tilt end point (restricted range)

USE Activates the changes

SPECIAL

BLACKD NO/YES Activates the move-in black delay (3 s)

RESET DMX The DMX controller can reset the product

SYSTEM The control panel can reset the product

POWER NORMAL/

HIGH

LEDs illuminate at normal or high intensity

NOTE: The product will return to Normal if the internal

temperature becomes too high

COLOR UC White output matches that of older products

RGBTOW White output set by RGB-W

OFF White output defined by RGBW faders

FAN DMX The DMX controller can set the fan speed

SYSTEM The control panel can reset the fan speed

DMXERROR SAVE In case of lost DMX signal, the product will remain in its current

state

BLAK In case of lost DMX signal, the product will blackout

EDIT

STEP

000~255

Selects the program step

PAN Selects the pan position

TILT Selects the tilt position

SPEED Selects the pan/tilt spee

1st Level Programming Levels Description

EDIT (Cont.)

RED

000~255

Combines red, green, blue, and white to obtain a custom color

GREEN

BLUE

IMMER Selects the dimmer value

STROBE Selects the strobe frequency and mode

DIMSPEED Selects the dimmer speed

TIME Selects the step duration

USE NO/YES Activates the changes

XTRA PASSWORD

**** Opens the Extra menu (see below)

Q-Wash 260-LED QRG

Page 7 of 10

Extra Menu

1st Level 2nd Level 3rd Level 4th Level Description

CALIB

3200 K RED 000~255 Sets color temperature for Macro > White 1

GREEN

BLUE

3400 K RED 000~255 Sets color temperature for Macro > White 2

GREEN

BLUE

4200 K RED 000~255 Sets color temperature for Macro > White 3

GREEN

BLUE

4900 K RED 000~255 Sets color temperature for Macro > White 4

GREEN

BLUE

5600 K RED 000~255 Sets color temperature for Macro > White 5

GREEN

BLUE

5900 K RED 000~255 Sets color temperature for Macro > White 6

GREEN

BLUE

6500 K RED 000~255 Sets color temperature for Macro > White 7

GREEN

BLUE

7200 K RED 000~255 Sets color temperature for Macro > White 8

GREEN

BLUE

8000 K RED 000~255 Sets color temperature for Macro > White 9

GREEN

BLUE

8500 K RED 000~255 Sets color temperature for Macro > White 10

GREEN

BLUE

10000 K RED 000~255 Sets color temperature for Macro > White 11

GREEN

BLUE

RGB-W RED 000~255 Sets color temperature for SPECIAL > COLOR >

RGBTOW

GREEN

BLUE

DEFAULT DEFAULT NO/YES N/A Defaults the product to factory settings

Q-Wash 260-LED QRG

Page 8 of 10

DMX Values

BASIC Channel Function Value Percent/Setting

1 Pan 000 255 0~540º

2 Tilt 000 255 0~270º

3 Red 000 255 0~100%

4 Green 000 255 0~100%

5 Blue 000 255 0~100%

6 Power and Color

Macro

000 005

006 010

011 030

031 050

051 070

071 090

091 110

111 130

131 150

151 170

171 200

201 205

206 210

211 215

216 220

221 225

226 230

231 235

236 240

241 245

246 250

251 255

No function

High power

R: 100% G: Up B: 0%

R: Down G: 100% B: 0%

R: 0% G: 100% B: Up

R: 0% G: Down B: 100%

R: Up G: 0% B: 100%

R: 100% G: 0% B: Down

R: 100% G: Up B: Up

R: Down G: Down B: 100%

R: 100% G: 100% B: 100%

White 1: 3200 K

White 2: 3400 K

White 3: 4200 K

White 4: 4900 K

White 5: 5600 K

White 6: 5900 K

White 7: 6500 K

White 8: 7200 K

White 9: 8000 K

White 10: 8500 K

White 11: 10,000 K

7 Dimmer 000 255 0~100%

8 Strobe 000 009

010 255 No function

01~20 Hz

9 Control

000 019

020 039

040 059

060 079

080 099

100 119

120 139

140 149

150 159

160 169

170 179

180 199

200 219

220 255

No function

Pan/tilt black activation

Pan/tilt black deactivation

Automatic fan speed

Slow fan speed

Normal fan speed

High fan speed

Auto program 1 (3 s activation delay)

Auto program 2 (3 s activation delay)

Test (3 s activation delay)

Custom program (3 s activation delay)

No function

Reset (3 s activation delay)

No function

Q-Wash 260-LED QRG

Page 9 of 10

ADVANCED Channel Function

alue Percent/Setting

1 Pan 000 255 0~540º

2 Pan Fine 000 255 Fine movement control

3 Tilt 000 255 0~270º

4 Tilt Fine 000 255 Fine movement control

5 Pan/Tilt Speed 000 255 Fast~Slow

6 Red 000 255 0~100%

7 Green 000 255 0~100%

8 Blue 000 255 0~100%

9 Power and Color

Macro

000 005

006 010

011 030

031 050

051 070

071 090

091 110

111 130

131 150

151 170

171 200

201 205

206 210

211 215

216 220

221 225

226 230

231 235

236 240

241 245

246 250

251 255

No function

High power

R: 100% G: Up B: 0%

R: Down G: 100% B: 0%

R: 0% G: 100% B: Up

R: 0% G: Down B: 100%

R: Up G: 0% B: 100%

R: 100% G: 0% B: Down

R: 100% G: Up B: Up

R: Down G: Down B: 100%

R: 100% G: 100% B: 100%

White 1: 3200 K

White 2: 3400 K

White 3: 4200 K

White 4: 4900 K

White 5: 5600 K

White 6: 5900 K

White 7: 6500 K

White 8: 7200 K

White 9: 8000 K

White 10: 8500 K

White 11: 10,000 K

10 Dimmer 000 255 0~100%

11 Strobe 000 009

010 255 No function

01~20 Hz

12 Control

000 019

020 039

040 059

060 079

080 099

100 119

120 139

140 149

150 159

160 169

170 179

180 199

200 219

220 255

No function

Pan/tilt black activation

Pan/tilt black deactivation

Automatic fan speed

Slow fan speed

Normal fan speed

High fan speed

Auto program 1 (3 s activation delay)

Auto program 2 (3 s activation delay)

Test (3 s activation delay)

Custom program (3 s activation delay)

No function

Reset (3 s activation delay)

No function

Q-Wash 260-LED QRG

Page 10 of 10

CHAUVET®

General Information

Address: 5200 NW 108th Avenue

Sunrise, FL 33351

Voice: (954) 929-1115

Fax: (954) 929-5560

Toll free: (800) 762-1084

United Kingdom and Ireland

CHAUVET® Europe Ltd.

General Information

Address: Unit 1C

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK

NG16 6NT

Voice: +44 (0)1773 511115

Fax: +44 (0)1773 511110

Technical Support

Voice: (954) 929-1115 (Press 4)

Fax: (954) 756-8015

Email: [email protected]

Technical Support

Email: [email protected]

World Wide Web

www.chauvetlighting.com World Wide Web

www.chauvetlighting.co.uk

Q-Wash 260-LED QRG – Rev. 05

Printed in the P. R. C.

Andere Handbücher für Q-WASH 260-LED

Inhaltsverzeichnis

Andere Chauvet Leuchte Handbücher

Chauvet

Chauvet Intimidator Color DMX-500 Technisches Dokument

Chauvet

Chauvet Q-Spot Bedienungsanleitung

Chauvet

Chauvet Legend 412Z Bedienungsanleitung

Chauvet

Chauvet SlimPAR 64 RGBA Bedienungsanleitung

Chauvet

Chauvet Batten 80i Bedienungsanleitung

Chauvet

Chauvet colorstrip mini Bedienungsanleitung

Chauvet

Chauvet Intimidator Color DMX-500 Bedienungsanleitung

Chauvet

Chauvet Q-Wash 36 Bedienungsanleitung

Chauvet

Chauvet LED-PANEL4 Bedienungsanleitung

Chauvet

Chauvet LEG-3000 Handbuch

Chauvet

Chauvet LEG-3000 Bedienungsanleitung

Chauvet

Chauvet Q-Spot 300 Bedienungsanleitung

Chauvet

Chauvet LX 10 Bedienungsanleitung

Chauvet

Chauvet Vue II Bedienungsanleitung

Chauvet

Chauvet LED-BAR Bedienungsanleitung

Chauvet

Chauvet Vue I Handbuch

Chauvet

Chauvet Followspot 1200 Bedienungsanleitung

Chauvet

Chauvet PAR56 Bedienungsanleitung

Chauvet

Chauvet LG-20 Bedienungsanleitung

Chauvet

Chauvet LED-PAR200B Handbuch

Chauvet

Chauvet DMX Abyss DMX-450 Handbuch

Chauvet

Chauvet eclipse Bedienungsanleitung

Chauvet

Chauvet Q-Spot 152 Bedienungsanleitung

Chauvet

Chauvet Rogue r2 Beam Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung