Chauvet Q-Wash 419Z-LED Bedienungsanleitung

Quick Reference Guide

English EN

Español ES

Français FR

Q-Wash™ 419Z-LED QRG EN

About this

Guide

The Q-Wash™ 419Z-LED Quick Reference Guide (QRG) has basic

product information such as connection, mounting, menu options,

and DMX values.

For more information on the product, download the user manual at

www.chauvetpro.com .

Disclaimer

The information and specifications contained in this QRG are subject

to change without notice.

Safety Notes

•Do not open this product. It contains no user-serviceable parts.

•Do not look at the light source when the product is on.

•Caution: This product’s housing may be hot when lights are

operating.

•Mount this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

•Do not leave any flammable material within 50 cm of this

product while operating or connected to power.

•Use a safety cable when mounting this product overhead.

•Do not operate this product outdoors or in any location where

dust, excessive heat, water, or humidity may affect it.

•Do not operate this product if the housing, lenses, or cables

appear damaged.

•Do not connect this product to a dimmer or rheostat.

•Only connect this product to a grounded and protected circuit.

•Only use the hanging/mounting bracket or the handles to carry

this product. Do not carry the product by the moving head.

•In the event of a serious operating problem, stop using

immediately.

•The maximum ambient temperature is 104 °F (40 °C). Do not

operate this product at higher temperatures.

EN Q-Wash™ 419Z-LED QRG

What Is

Included

•Q-Wash™ 419Z-LED

•Power input cord

•2 Omega brackets

•Safety cable

•Warranty card

•Quick Reference Guide

AC Power

This product has an auto-ranging power supply that can work with

an input voltage range of 100 to 240 V, 50/60 Hz.

Power Linking

You can link up to 5 Q-Wash™ 419Z-LED products at 120 V or

9 at 230 V. Never exceed this number. Power linking cords can be

purchased separately.

AC Plug

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow/Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Replacing

the

Fuse

Disconnect this product from power.

1. Using a Phillips #2 head screwdriver, unscrew the fuse holder

cap from the housing.

2. Using the same type and rating, remove the blown fuse and

replace it with a good fuse.

3. Screw the fuse holder cap back into place and reconnect power.

DMX Linking

The Q-Wash™ 419Z-LED will work with a DMX controller using a

regular DMX serial connection. For more information on how to

configure for DMX operation, see DMX Primer from

www.chauvetpro.com.

DMX

Connection

The Q-Wash™ 419Z-LED uses a regular DMX data connection for

its DMX personalities: PERSON1, PERSON2, PERSON3,

PERSON4, and PERSON5. See the user manual to connect and

configure for DMX operation.

Master/Slave

Connection

The Q-Wash™ 419Z-LED uses the DMX data connection for its

Master/Slave mode. See the user manual to connect and configure

for master/slave operation.

Q-Wash™ 419Z-LED QRG EN

Mounting Procedures

Control

Panel

Description

Button

Function

Exits from the current menu or function

ENTER

Enables the currently displayed menu or sets the currently

selected value into the selected function

UP Navigates upwards through the menu list and increases the

numeric value when in a function

DOWN Navigates downwards through the menu list and decreases

the numeric value when in a function

Password

If you are prompted to enter a password on the product, press the

buttons in the following order: UP > DOWN > UP > DOWN >

ENTER.

The product’s password cannot be changed and must be entered

whenever you are prompted. For more information on how to set a

password for your product, see the user manual at

www.chauvetlighting.com.

Overhead Mounting

Floor Mounting

Safety Cable

Clamp

EN Q-Wash™ 419Z-LED QRG

Menu Options

Main Level

Programming Levels

Description

ADDRESS

000-512

Sets the DMX starting address

PERSON

PERSON1

10-Channel mode

PERSON2

21-Channel mode

PERSON3

8-Channel mode

PERSON4

21-Channel mode

PERSON5

34-Channel mode

SETTINGS PERFORM

FANS

SLOW

Selects the fan’s operation mode.

NORM

FAST

AUTO

PT SPEED

FAST

Defines the speed of the pan/tilt

SLOW

PAN INVERT

NORM

Defines the direction of the pan fader

INVERT

TILT INVERT

NORM

Defines the direction of the tilt fader

INVERT

OPTICS

SPEED

FAST

Defines the speed of the zoom

SLOW

BLACKOUT

DELAY

Activates the move-in black delay

(3 sec)

INSTANT

DIMMER

DIM4

Slow (DIM4) to fast (DIM1) dimmer

curves

DIM3

DIM2

DIM1

OFF

Linear dimmer/no dimmer function

CURV

CURV3

Slow (CURV3) to fast (CURV1)

dimmer curves

CURV2

CURV1

OFF

No dimmer

Q-Wash™ 419Z-LED QRG EN

Menu Options (cont.)

Main Level

Programming Levels

Description

SETTINGS

(cont.)

PERFORM

(cont.)

DIM INVERT

NORM

Defines the direction of the dimmer

fader

INVERT

COLOR

Universal color balance

RGBtoW

RGB set to “255” = balanced white

OFF

RGB set to “255” = max. output

DMX ERROR SAVE

Continues with last command upon

loss of DMX control

BLACK

Blacks out fixture upon loss of DMX

signal

DMX RESET

DMX

The DMX controller resets the product

DISPLAY

The control panel resets the product

DISPLAY ON

LONG

Determines how long the backlight of

the display will stay on after last

command button pressed

SHORT

ALWAYS

HOME

SCREEN

DMX

Displays DMX address

NAME

Displays what is programmed via

SERVICE > CONTENT level

DISPLAY

INVERT

NORM

Allows the display on the control panel

to be inverted

INVERT

ZOOM POS.

NORMAL

Zoom lens is set to factory default

BOOST

Sets the zoom lens to perform better at

longer distances

RANGE

P.START

000~255

Sets the pan start point

(pan range)

P.END Sets the pan end point

(pan range)

T.START Sets the tilt start point

(tilt range)

T.END Sets the tilt end point

(tilt range)

USE

Activates the changes

YES

DISPLAY

LOCK

OFF

Activates/deactivates the main level

password

DEFAULT ****

(Enter Password) Resets fixture to factory default

settings

SEND

Sends ALL settings of the 1st product

to all other Q-Wash™ 419Z-LEDs

connected to the DMX output

YES

EN Q-Wash™ 419Z-LED QRG

Menu Options (cont.)

Main Level

Programming Levels

Description

STAND ALONE

RUN

DMX 512

Selects DMX running mode

AUTO1

Selects the first automatic program

AUTO2

Selects the second automatic program

CUSTOM

Selects a user customizable program

TEST

Starts the product’s test sequence

SLAVE

Selects the Slave running mode

EDIT

STEP

01~49

Selects the program step

PAN

000~255

Selects the pan position

TILT

Selects the tilt position

RED

Combines red, green, blue, and white

to obtain a custom color

GREEN

BLUE

WHITE

DIMMER

Selects the dimmer value

STROBE

Selects the strobe frequency

ZOOM

Select the zoom position

TIME

Selects the step duration

USE

Activates the changes

YES

SEND NO Sends CUSTOM settings of the 1st

product to all other Q-Wash™ 419Z-

LEDs connected to the DMX output

YES

INFO

SOFTWARE

V.X.X

Shows the version of software installed

MANUAL RESET

ALL RESET

Resets fixture to home settings

YES

PT.RESET

Resets the Pan/Tilt to home settings

YES

OPTIC RESET

Resets the Zoom to home settings

YES

Q-Wash™ 419Z-LED QRG EN

Menu Options (cont.)

Main Level

Programming Levels

Description

MANUAL

(cont.) MANUAL

PAN

000~255 Allows manual control of all settings

from control panel

TILT

RED

GREEN

BLUE

WHITE

DIMMER

STROBE

ZOOM

SERVICE

CALIB.M

PAN

000~255 Calibrates the start position of the

motors

TILT

ZOOM

CALIB.C

3200K

RED

000~255

Sets color temperature for White 1

GREEN

BLUE

WHITE

3400K

RED

Sets color temperature for White 2

GREEN

BLUE

WHITE

4200K

RED

Sets color temperature for White 3

GREEN

BLUE

WHITE

4900K

RED

Sets color temperature for White 4

GREEN

BLUE

WHITE

5600K

RED

Sets color temperature for White 5

GREEN

BLUE

WHITE

5900K

RED

Sets color temperature for White 6

GREEN

BLUE

WHITE

EN Q-Wash™ 419Z-LED QRG

Menu Options (cont.)

Main Level Programming Levels Description

SERVICE

(cont.)

CALIB.C

(cont.)

6500K

RED

000~255

Sets color temperature for White 7

GREEN

BLUE

WHITE

7200K

RED

Sets color temperature for White 8

GREEN

BLUE

WHITE

8000K

RED

Sets color temperature for White 9

GREEN

BLUE

WHITE

8500K

RED

Sets color temperature for White 10

GREEN

BLUE

WHITE

10000K

RED

Sets color temperature for White 11

GREEN

BLUE

WHITE

RGBTOW

RED

Defines the color temperature used

when COLOR is set to RGBTOW

GREEN

BLUE

ACCESS

SETTINGS

LOCK

OFF

Activates/deactivates the

SETTINGS

main level password

SERVICE

LOCK

OFF

Activates/deactivates the

SERVICE

main level password

CONTENT

DISPLAY1

*********

Allows 16 characters of text to be

displayed on control panel

DISPLAY2

*********

SEND NO

Sends CONTENT settings of the 1st

product to all other Q-Wash™ 419Z-

LEDs connected to the DMX output

YES

Service Recovery

****

(Enter Password)

Resets all custom modes to default

values

Q-Wash™ 419Z-LED QRG EN

DMX Values

PERSON1

Channel

Function

Value

Percent/Setting

Pan

000 ó255

0~100%

Tilt

000 ó255

0~100%

Red

000 ó255

0~100%

Green

000 ó255

0~100%

Blue

000 ó255

0~100%

White

000 ó255

0~100%

Dimmer

000 ó255

0~100%

8 Strobe

000 ó009

010

255

No Function

0~100%

Zoom

000 ó255

0~100%

10 Control

000 ó019

020 ó039

040 ó059

060 ó079

080 ó099

100 ó119

120 ó139

140 ó149

150 ó159

160 ó169

170 ó179

180 ó199

200 ó219

220 ó235

236 ó239

240 ó243

244 ó247

248 ó251

252 ó255

No Function

Pan/tilt black activation

Pan/tilt black deactivation

Automatic fan speed

Slow fan speed

Normal fan speed

High fan speed

Auto program 1 (3 s activation delay)

Auto program 2 (3 s activation delay)

Test (3 s activation delay)

Custom program (3 s activation delay)

No Function

Reset (3 s activation delay)

No Function

DIM0 (3 s activation delay)

DIM1 (3 s activation delay)

DIM2 (3 s activation delay)

DIM3 (3 s activation delay)

DIM4 (3 s activation delay)

Andere Handbücher für Q-Wash 419Z-LED

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Leuchte Handbücher

Chauvet

Chauvet Q-Spot 250 Bedienungsanleitung

Chauvet

Chauvet LED-BAR Handbuch

Chauvet

Chauvet Vue III Handbuch

Chauvet

Chauvet Legend 1200E Wash Bedienungsanleitung

Chauvet

Chauvet LED-BANK4 Bedienungsanleitung

Chauvet

Chauvet PAR56 Bedienungsanleitung

Chauvet

Chauvet MiN Spot Handbuch

Chauvet

Chauvet MiN Spot Bedienungsanleitung

Chauvet

Chauvet Q-Wash 36 Bedienungsanleitung

Chauvet

Chauvet Q-Wash LED Bedienungsanleitung

Chauvet

Chauvet Stepper Bedienungsanleitung

Chauvet

Chauvet Intimidator Color DMX-500 Bedienungsanleitung

Chauvet

Chauvet LEG-5000 Handbuch

Chauvet

Chauvet LED-PALET Handbuch

Chauvet

Chauvet LED Splash LED-PAR196 Bedienungsanleitung

Chauvet

Chauvet Vue II Handbuch

Chauvet

Chauvet S-Mover Bedienungsanleitung

Chauvet

Chauvet LX 5 Bedienungsanleitung

Chauvet

Chauvet PAR56 Bedienungsanleitung

Chauvet

Chauvet LEG-5000 Bedienungsanleitung

Chauvet

Chauvet Intimidator Spot DMX-680 Bedienungsanleitung

Chauvet

Chauvet Vue I Handbuch

Chauvet

Chauvet Lrgrnd 300E Beam Bedienungsanleitung

Chauvet

Chauvet COLORsphere LED-CS8 Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung