Checkpoint Smart-1 225 Bedienungsanleitung

14 January 2016

Getting Started Guide

Smart-1 225/3050/3150

Appliances

Models: ST-25, ST-50, ST-150

Classification: [Protected] P/N: 706625

and distributed under licensing restricting their use, copying, distribution, and

decompilation. No part of this product or related documentation may be reproduced in

any form or by any means without prior written authorization of Check Point. While

every precaution has been taken in the preparation of this book, Check Point assumes

no responsibility for errors or omissions. This publication and features described

herein are subject to change without notice.

RESTRICTED RIGHTS LEGEND:

Use, duplication, or disclosure by the government is subject to restrictions as set forth

in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software

clause at DFARS 252.227-7013 and FAR 52.227-19.

TRADEMARKS:

Refer to the Copyright page http://www.checkpoint.com/copyright.html for a list of our

trademarks.

Refer to the Third Party copyright notices

http://www.checkpoint.com/3rd_party_copyright.html for a list of relevant copyrights

and third-party licenses.

Important Information

Latest Software

We recommend that you install the most recent software release to stay up-to-date

with the latest functional improvements, stability fixes, security enhancements and

protection against new and evolving attacks.

Latest Documentation

The latest version of this document is at:

http://supportcontent.checkpoint.com/documentation_download?ID=32309

To learn more, visit the Check Point Support Center

http://supportcenter.checkpoint.com.

For more about this release, see the

Smart-1 Appliances home page

http://supportcontent.checkpoint.com/solutions?id=sk98931.

Revision History

Date

Description

14 January 2016 Included Spanish translation of this guide

18 December 2014 Added

Russian Operational Instructions

("Установка и

Конфигурирование (RU)" on page 63)

28 July 2014 Replaced telescopic rails installation procedures with a link

to the

Telescopic Rails installation booklet

("Installing

Telescoping Rails" on page 21)

15 May 2014 First release of this document

Feedback

Check Point is engaged in a continuous effort to improve its documentation.

Please help us by sending your comments

[email protected]?subject=Feedback on Smart-1 225/3050/3150

Appliances Getting Started Guide.

Safety, Environmental, and Electronic Emissions Notices

4| Smart-1 225/3050/3150 Appliances Getting Started Guide

Safety, Environmental, and

Electronic Emissions Notices

Read the following warnings before setting up or using the appliance.

Warning - Do not block air vents. A minimum 1/2-inch (13mm) clearance is

required.

Important - We recommend that only experienced personnel install or remove

hardware components. Installing or removing components incorrectly can

permanently damage the appliance.

Before you install or remove a chassis, or work near power supplies, turn off the

power and unplug the power cord.

To prevent damage to any system board, it is important to handle it with care. The

following measures are generally sufficient to protect your equipment from static

electricity discharge:

•When handling the board, to use a grounded wrist strap designed for static

discharge elimination.

•Touch a grounded metal object before removing the board from the antistatic bag.

•Handle the board by its edges only. Do not touch its components, peripheral chips,

memory modules or gold contacts.

•When handling processor chips or memory modules, avoid touching their pins or

gold edge fingers.

•Restore the communications appliance system board and peripherals back into the

antistatic bag when they are not in use or not installed in the chassis. Some

circuitry on the system board can continue operating even though the power is

switched off.

•Under no circumstances should the lithium battery cell used to power the

real-time clock be allowed to short. The battery cell may heat up under these

conditions and present a burn hazard.

Safety, Environmental, and Electronic Emissions Notices

Smart-1 225/3050/3150 Appliances Getting Started Guide | 5

Warning - DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.

•Disconnect the system board power supply from its power source before you

connect or disconnect cables or install or remove any system board components.

Failure to do this can result in personnel injury or equipment damage.

•Avoid short-circuiting the lithium battery; this can cause it to superheat and cause

burns if touched.

•Do not operate the processor without a thermal solution. Damage to the processor

can occur in seconds.

•Class 1 laser product warning - A totally enclosed laser system containing a class

1 laser.

Rack Mount Instructions

The following or similar rack-mount instructions are included with the installation

instructions:

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,

the operating ambient temperature of the rack environment may be greater than

room ambient. Therefore, consideration should be given to installing the

equipment in an environment compatible with the maximum ambient temperature

specified by the manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the

amount of air flow required for safe operation of the equipment is not

compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits might

have on over current protection and supply wiring. Appropriate consideration of

equipment nameplate ratings should be used when addressing this concern.

Reliable Earthing - Reliable earthing of rack-mounted equipment should be

maintained. Particular attention should be given to supply connections other than

direct connections to the branch circuit (e.g. use of power strips).

Safety, Environmental, and Electronic Emissions Notices

6| Smart-1 225/3050/3150 Appliances Getting Started Guide

For California:

Perchlorate Material - special handling may apply. See

http://www.dtsc.ca.gov/hazardouswaste/perchlorate

The foregoing notice is provided in accordance with California Code of Regulations

Title 22, Division 4.5, Chapter 33. Best Management Practices for Perchlorate

Materials. This product, part, or both may include a lithium manganese dioxide battery

which contains a perchlorate substance.

Proposition 65 Chemical

Chemicals identified by the State of California, pursuant to the requirements of the

California Safe Drinking Water and Toxic Enforcement Act of 1986, California Health &

Safety Code s. 25249.5, et seq. ("Proposition 65"), that is "known to the State to cause

cancer or reproductive toxicity" (see http://www.calepa.ca.gov)

WARNING:

Handling the cord on this product will expose you to lead, a chemical known to the

State of California to cause cancer, and birth defects or other reproductive harm.

Wash hands after handling.

Federal Communications Commission (FCC) Statement:

For a Class A digital device or peripheral

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

For a Class B digital device or peripheral

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

Safety, Environmental, and Electronic Emissions Notices

Smart-1 225/3050/3150 Appliances Getting Started Guide | 7

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Information to user:

The user's manual or instruction manual for an intentional or unintentional radiator

shall caution the user that changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate the

equipment. In cases where the manual is provided only in a form other than paper,

such as on a computer disk or over the Internet, the information required by this

section may be included in the manual in that alternative form, provided the user can

reasonably be expected to have the capability to access information in that form.

Canadian Department Compliance Statement:

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe A est conforme à la norme NMB-003 du Canada.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

Japan Compliance Statement:

Class A

Safety, Environmental, and Electronic Emissions Notices

8| Smart-1 225/3050/3150 Appliances Getting Started Guide

Class B

European Union (EU) Electromagnetic Compatibility Directive

This product is herewith confirmed to comply with the requirements set out in the

Council Directive on the Approximation of the Laws of the Member States relating to

Electromagnetic Compatibility Directive (2004/108/EC). For the evaluation regarding

the Electromagnetic Compatibility (2004/108/EC)

This product is in conformity with Low Voltage Directive 2006/95/EC, and complies with

the requirements in the Council Directive 2006/95/EC relating to electrical equipment

designed for use within certain voltage limits and the Amendment Directive

93/68/EEC.

Product Disposal

This symbol on the product or on its packaging indicates that this product must not be

disposed of with your other household waste. Instead, it is your responsibility to

dispose of your waste equipment by handing it over to a designated collection point for

the recycling of waste electrical and electronic equipment. The separate collection and

recycling of your waste equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects human health and

the environment. For more information about where you can drop off your waste

equipment for recycling, please contact your local city office or your household waste

disposal service.

Safety, Environmental, and Electronic Emissions Notices

Smart-1 225/3050/3150 Appliances Getting Started Guide | 9

Remarques Relatives à la Sécurité,

l'environnement et les Émissions Électroniques

Avant de mettre en place ou d'utiliser l'appareil, veuillez lire les avertissements

suivants.

Avertissement: Ne pas obturer les aérations. Il faut laisser au moins 1,27 cm

d'espace libre.

Avertissement: Nous recommandons que seuls les personnes autorisées et

compétentes, puissent installer et désinstaller les parties matériels/hardware.

L’installation ou la désinstallation de components matériels peuvent

endommager l’appareil.

Avant de manipuler une appliance ou ses blocs d’alimentations, l’éteindre et

débrancher son câble électrique.

Pour éviter d'endommager les cartes système, il est important de les manipuler avec

soin. Les mesures suivantes sont généralement suffisantes pour protéger votre

équipement contre les décharges d'électricité statique:

•Avant de manipuler la carte, portez aux poignet un bracelet antistatique relié à la

terre.

•Touchez un objet métallique relié à la terre avant d'extraire la carte de son sachet

antistatique.

•Ne tenez la carte que par ses bords. Ne touchez aucun composant, puce

périphérique, module mémoire ou contact plaqué or.

•Lorsque vous manipulez des processeurs ou des modules mémoire, évitez de

toucher leurs broches ou les pistes de contact dorées.

•Remettez dans leur sachet antistatique la carte système et les périphériques de

l'appareil de communications lorsqu'ils ne sont pas utilisés ou installés dans le

châssis. Certains circuits sur la carte système peuvent rester fonctionnels même

si l'appareil est éteint.

•Il ne faut jamais court-circuiter la pile au lithium qui alimente l'horloge

temps-réel. Elle risque de s'échauffer et de causer des brûlures.

Safety, Environmental, and Electronic Emissions Notices

10 | Smart-1 225/3050/3150 Appliances Getting Started Guide

Avertissement: DANGER D'EXPLOSION SI LA PILE EST MAL REPLACÉE. NE

REMPLACER QU'AVEC UN TYPE IDENTIQUE OU ÉQUIVALENT,

RECOMMANDÉ PAR LE CONSTRUCTEUR. LES PILES DOIVENT ÊTRE MISES

AU REBUT CONFORMÉMENT AUX INSTRUCTIONS DE LEUR FABRICANT.

•Débrancher l'alimentation de la carte système de sa source électrique avant de

connecter ou déconnecter des câbles ou d'installer ou retirer des composants. À

défaut, les risques sont d'endommager l'équipement et de causer des blessures

corporelles.

•Ne pas court-circuiter la pile au lithium: elle risque de surchauffer et de causer

des brûlures en cas de contact.

•Ne pas faire fonctionner le processeur sans refroidissement. Le processeur peut

être endommagé en quelques secondes.

•Produit laser de classe 1: un système laser totalement clos et contenant un laser

de classe 1.

Instructions de montage en rack

Les instructions d'installation sont livrées avec les instructions de montage en rack

ci-après (ou similaires):

Fonctionnement à température plus élevée: Si l'appareil est installé dans une

armoire fermée ou un rack à plusieurs unités, la température du rack en

fonctionnement peut être supérieure à la température ambiante de la pièce. Avant

d'installer l'équipement, il faut donc s'assurer qu'il sera dans un environnement

compatible avec la température ambiante maximale indiquée par le constructeur.

Circulation d'air réduite: L'installation dans un rack doit s'assurer de ne pas

limiter la circulation de l'air nécessaire au bon fonctionnement de l'équipement.

Charge mécanique: Lors du montage de l'équipement dans le rack, il faut faire

attention à ne pas déséquilibrer l'ensemble. Un rack se remplit en commençant

par le bas.

Surcharge: Pour la connexion de l'équipement au circuit électrique, il faut vérifier

les risques de surcharge et les éventuelles conséquences sur la protection contre

les surtensions et sur le câblage électrique. Dans ce contexte, il faut tenir compte

des informations mentionnées par l’étiquette apposée sur l’équipement.

Mise à la terre: Les équipements montés en rack doivent être en permanence

reliés à un terre fiable. Il faut faire particulièrement attention aux branchements

qui ne vont pas directement à la source électrique (par exemple des multiprises).

Andere Handbücher für Smart-1 225

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Checkpoint Netzwerk-Hardware Handbücher

Checkpoint

Checkpoint 21000 Appliances G-70 Bedienungsanleitung

Checkpoint

Checkpoint Quantum SMART-1 600-M Bedienungsanleitung

Checkpoint

Checkpoint VPN-1 Edge X Series Bedienungsanleitung

Checkpoint

Checkpoint Smart-1 625 Bedienungsanleitung

Checkpoint

Checkpoint UTM-1 U-5 Bedienungsanleitung

Checkpoint

Checkpoint UTM-1 Edge W16 Bedienungsanleitung

Checkpoint

Checkpoint MHO175 Bedienungsanleitung

Checkpoint

Checkpoint 1500 Series Bedienungsanleitung

Checkpoint

Checkpoint 730 Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SMART-1 Bedienungsanleitung

Checkpoint

Checkpoint Smart-1 205 Bedienungsanleitung

Checkpoint

Checkpoint NGX R66 Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SPARK 1530 Bedienungsanleitung

Checkpoint

Checkpoint MHO170 Bedienungsanleitung

Checkpoint

Checkpoint TE2000XN Bedienungsanleitung

Checkpoint

Checkpoint 21000 Series Bedienungsanleitung

Checkpoint

Checkpoint 16000 Bedienungsanleitung

Checkpoint

Checkpoint CPAC-Falcon-10G-B Bedienungsanleitung

Checkpoint

Checkpoint L-71 Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SPARK 1500 Bedienungsanleitung

Checkpoint

Checkpoint 5000 Series Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM FORCE 19000 Bedienungsanleitung

Checkpoint

Checkpoint 1500 Series Bedienungsanleitung

Checkpoint

Checkpoint QUANTUM SMART-1 6000-L/6000-XL Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung