Chicago Electric 65766 Bedienungsanleitung

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

ITEM 65766

REV 14g

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Item 65766 For technical questions, please call 1-888-866-5797. Page 2

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

General Power Tool Safety Warnings

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future reference.

The term ″power tool″ in the warnings refers to your mains-operated (corded) power

tool.

Work Area Safety

1. Keep work area clean and well

lit. Cluttered or dark areas invite

accidents.

2. Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust

or fumes.

3. Keep children and bystanders

away while operating a power tool.

Distractions can cause you to

lose control.

Item 65766 For technical questions, please call 1-888-866-5797. Page 3

Electrical Safety

1. Power tool plugs must match

the outlet. Never modify the

plug in any way. Do not use any

adapter plugs with grounded

power tools. Unmodified plugs and

matching outlets will reduce risk of

electric shock.

2. Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.

3. Do not expose power tools to rain

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged

or entangled cords increase the risk

of electric shock.

5. When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

6. If operating a power tool in a damp

location is unavoidable, use a

Ground Fault Circuit Interrupter

(GFCI) protected supply.

Use of a GFCI reduces the risk of

electric shock.

Personal Safety

1. Stay alert, watch what you are

doing and use common sense

when operating a power tool.

Do not use a power tool while you

are tired or under the influence

of drugs, alcohol or medication.

A moment of inattention while

operating power tools may result in

serious personal injury.

2. Use personal protective

equipment. Always wear eye

protection. Protective equipment

such as dust mask, non-skid safety

shoes, hard hat, or hearing protection

used for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting.

Ensure the Trigger is in the

off-position before connecting

to power source, picking up or

carrying the tool.

Carrying power tools with your finger

on the Trigger or energizing power

tools that have the Trigger on invites

accidents.

4. Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

5. Dress properly. Do not wear loose

clothing or jewelry. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewelry or long hair can be caught in

moving parts.

6. If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

Item 65766 For technical questions, please call 1-888-866-5797. Page 4

are connected and properly used.

Use of dust collection can reduce

dust-related hazards.

7. Only use safety equipment

that has been approved by an

appropriate standards agency.

Unapproved safety equipment

may not provide adequate

protection. Eye protection must be

ANSI-approved and breathing

protection must be NIOSH-approved

for the specific hazards in the work

area.

Power Tool Use and Care

1. Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

2. Do not use the power tool if the

Trigger

does not turn it on and off.

Any power tool that cannot be

controlled with the Trigger is

dangerous and must be repaired.

3. Disconnect the plug from the

power source before making

any adjustments, changing

accessories, or storing power

tools. Such preventive safety

measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of

the reach of children and do not

allow persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

5. Maintain power tools. Check

for misalignment or binding of

moving parts, breakage of parts

and any other condition that may

affect the power tool’s operation.

If damaged, have the power

tool repaired before use. Many

accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are

less likely to bind and are easier to

control.

7. Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed.

Use of the power tool for operations

different from those intended could

result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical

replacement parts.

This will ensure that the safety of the power tool is maintained.

Item 65766 For technical questions, please call 1-888-866-5797. Page 5

Reciprocating Saw Safety Warnings

1. Hold power tool by insulated

gripping surfaces when performing

an operation where cutting tool

may contact hidden wiring or its

own cord. Contact with a ″live″ wire

will make exposed metal parts of the

tool ″live″ and shock the operator.

2. Use clamps or another practical

way to secure and support the

workpiece to a stable platform.

Holding the work by hand or against

your body leaves it unstable and may

lead to loss of control.

3. Maintain labels and nameplates on

the tool.

These carry important safety

information.

If unreadable or missing,

contact Harbor Freight Tools for

a replacement.

4. Avoid unintentional starting.

Prepare to begin work before turning

on the tool.

5. Do not lay the tool down until it has

come to a complete stop. Moving

parts can grab the surface and pull

the tool out of your control.

6. When using a handheld power tool,

maintain a firm grip on the tool with

both hands to resist starting torque.

7. Do not leave the tool unattended

when it is plugged into an electrical

outlet. Turn off the tool, and unplug

it from its electrical outlet before

leaving.

8. This product is not a toy.

Keep it out of reach of children.

9. People with pacemakers should

consult their physician(s) before

use. Electromagnetic fields in close

proximity to heart pacemaker could

cause pacemaker interference or

pacemaker failure. In addition,

people with pacemakers should:

• Avoid operating alone.

• Do not use with Trigger locked on.

• Properly maintain and inspect to

avoid electrical shock.

• Properly ground power cord.

Ground Fault Circuit Interrupter

(GFCI) should also be implemented –

it prevents sustained electrical shock.

10. WARNING: Some dust created by

power sanding, sawing, grinding,

drilling, and other construction

activities, contains chemicals known

to the State of California to cause

cancer and birth defects or other

reproductive harm. Some examples

of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and

cement or other masonry products

• Arsenic and chromium from

chemically treated lumber

Your risk from these exposures

varies, depending on how often you

do this type of work. To reduce your

exposure to these chemicals: work in

a well ventilated area, and work with

approved safety equipment, such as

those dust masks that are specially

designed to filter out microscopic

particles. (California Health &

Safety Code § 25249.5, et seq.)

11. WARNING: The cord of this product

contains lead, a chemical known

to the State of California to cause

cancer, and birth defects or other

Item 65766 For technical questions, please call 1-888-866-5797. Page 6

reproductive harm. Wash hands

after handling. (California Health &

Safety Code § 25249.5, et seq.)

12. The warnings, precautions, and

instructions discussed in this

instruction manual cannot cover all

possible conditions and situations

that may occur.

It must be understood by the operator

that common sense and caution are

factors which cannot be built into

this product, but must be supplied by

the operator.

Vibration Safety

This tool vibrates during use.

Repeated or long-term exposure to

vibration may cause temporary or

permanent physical injury, particularly to

the hands, arms and shoulders. To reduce

the risk of vibration-related injury:

1. Anyone using vibrating tools regularly

or for an extended period should

first be examined by a doctor and

then have regular medical check-

ups to ensure medical problems

are not being caused or worsened

from use. Pregnant women or

people who have impaired blood

circulation to the hand, past

hand injuries, nervous system

disorders, diabetes, or Raynaud’s

Disease should not use this tool.

If you feel any symptoms related to

vibration (such as tingling, numbness,

and white or blue fingers), seek

medical advice as soon as possible.

2. Do not smoke during use. Nicotine

reduces the blood supply to the

hands and fingers, increasing the risk

of vibration-related injury.

3. Wear suitable gloves to reduce the

vibration effects on the user.

4. Use tools with the lowest vibration

when there is a choice.

5. Include vibration-free periods each

day of work.

6. Grip tool as lightly as possible (while

still keeping safe control of it). Let

the tool do the work.

7. To reduce vibration, maintain the

tool as explained in this manual.

If any abnormal vibration occurs, stop

use immediately.

SAVE THESE INSTRUCTIONS.

Item 65766 For technical questions, please call 1-888-866-5797. Page 7

Grounding

TO PREVENT ELECTRIC SHOCK AND DEATH FROM

INCORRECT GROUNDING WIRE CONNECTION:

Check with a qualified electrician if you are in doubt as to

whether the outlet is properly grounded. Do not modify the

power cord plug provided with the tool. Never remove the grounding

prong from the plug. Do not use the tool if the power cord or plug is

damaged. If damaged, have it repaired by a service facility before use.

If the plug will not fit the outlet, have a proper outlet installed by a

qualified electrician.

Grounded Tools: Tools with Three Prong Plugs

3-Prong Plug and Outlet

1. Tools marked with “Grounding

Required” have a three wire cord

and three prong grounding plug.

The plug must be connected to a

properly grounded outlet. If the tool

should electrically malfunction or

break down, grounding provides a

low resistance path to carry electricity

away from the user, reducing

the risk of electric shock. (See

“3-Prong Plug and Outlet”.)

2. The grounding prong in the plug is

connected through the green wire

inside the cord to the grounding

system in the tool. The green wire

in the cord must be the only wire

connected to the tool’s grounding

system and must never be attached

to an electrically “live” terminal. (See

“3-Prong Plug and Outlet”.)

3. The tool must be plugged into an

appropriate outlet, properly installed

and grounded in accordance with all

codes and ordinances. The plug and

outlet should look like those in the

preceding illustration.

(See “3-Prong Plug and Outlet”.)

Item 65766 For technical questions, please call 1-888-866-5797. Page 8

Double Insulated Tools: Tools with Two Prong Plugs

Outlets for 2-Prong Plug

1. Tools marked “Double Insulated”

do not require grounding. They

have a special double insulation

system which satisfies OSHA

requirements and complies with the

applicable standards of Underwriters

Laboratories, Inc., the Canadian

Standard Association, and the

National Electrical Code.

2. Double insulated tools may be used

in either of the 120 volt outlets shown

in the preceding illustration.

(See “3-Prong Plug and Outlet”.)

Extension Cords

1. Grounded tools require a three

wire extension cord. Double

Insulated tools can use either a two

or three wire extension cord.

2. As the distance from the supply

outlet increases, you must use a

heavier gauge extension cord. Using

extension cords with inadequately

sized wire causes a serious drop in

voltage, resulting in loss of power and

possible tool damage. (See Table A.)

3. The smaller the gauge number of the

wire, the greater the capacity of the

cord. For example, a 14 gauge cord

can carry a higher current than a 16

gauge cord. (See Table A.)

4. When using more than one extension

cord to make up the total length,

make sure each cord contains at

least the minimum wire size required.

(See Table A.)

5. If you are using one extension cord

for more than one tool, add the

nameplate amperes and use the sum

to determine the required minimum

cord size. (See Table A.)

6. If you are using an extension cord

outdoors, make sure it is marked with

the suffix “W-A” (“W” in Canada) to

indicate it is acceptable for outdoor

use.

7. Make sure the extension cord is

properly wired and in good electrical

condition. Always replace a damaged

extension cord or have it repaired by

a qualified electrician before using it.

8. Protect the extension cords from

sharp objects, excessive heat, and

damp or wet areas.

Item 65766 For technical questions, please call 1-888-866-5797. Page 9

TABLE A: RECOMMENDED MINIMUM

WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD

LENGTH

25´ 50´ 75´ 100´ 150´

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 -

12.1 – 16.0 14 12 10 - -

16.1 – 20.0 12 10 - - -

* Based on limiting the line voltage drop to five volts at

150% of the rated amperes.

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

VVolts

~Alternating Current

AAmperes

n0xxxx/min. No Load Revolutions per Minute

(RPM)

WARNING marking

concerning Risk of Eye Injury.

Wear ANSI-approved safety

goggles with side shields.

Read the manual before set-up

and/or use.

WARNING marking concerning

Risk of Fire.

Do not cover ventilation ducts.

Keepammableobjectsaway.

WARNING marking concerning

Risk of Electric Shock.

Properly connect power cord to

appropriate outlet.

Item 65766 For technical questions, please call 1-888-866-5797. Page 10

SPECIFICATIONS

Electrical Requirements 120 VAC / 60 Hz /

150W (loaded)

Blade Speed 2600 SPM

Blade Stroke 3/8”

Maximum Cutting Capacity 18 Gauge Steel

Sheet

Chuck Capacity 1/2”

4010157

INSTRUCTIONS FOR

PUTTING INTO USE

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before

set up or use of this product.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

tool to its “OFF” position and

unplug the tool from its

electrical outlet before

assembling or making any

adjustments to the tool.

Note: For additional information regarding

the parts listed in the following pages,

refer to the Assembly Diagram

near the end of this manual.

Assembly

1. Use the Hex Wrench (40) to

loosen the Hex Screw (27).

See picture below.

Hex Screw (27)

2. Wearing work gloves, insert the

shank of the Blade (39) into the

front of the Body Saw with the

blade pointed downward.

3. Tighten the Hex Screw to

secure the Blade in place.

Andere Handbücher für 65766

Inhaltsverzeichnis

Andere Chicago Electric Gesehen Handbücher

Chicago Electric

Chicago Electric 68829 Montageanleitung

Chicago Electric

Chicago Electric 40315 Bedienungsanleitung

Chicago Electric

Chicago Electric 40315 Installationshandbuch

Chicago Electric

Chicago Electric 97360 Montageanleitung

Chicago Electric

Chicago Electric 95004 Installationshandbuch

Chicago Electric

Chicago Electric 62800 Montageanleitung

Chicago Electric

Chicago Electric 46737 Bedienungsanleitung

Chicago Electric

Chicago Electric 90891 Installationshandbuch

Chicago Electric

Chicago Electric Professional Series 60608 Bedienungsanleitung

Chicago Electric

Chicago Electric 47003 Bedienungsanleitung

Chicago Electric

Chicago Electric 97360 Bedienungsanleitung

Chicago Electric

Chicago Electric 94596 Stücklistenhandbuch

Chicago Electric

Chicago Electric 14 Industrial Cut-off Saw 68104 Montageanleitung

Chicago Electric

Chicago Electric 96698 Installationshandbuch

Chicago Electric

Chicago Electric 46225 Bedienungsanleitung

Chicago Electric

Chicago Electric 98265 Installationshandbuch

Chicago Electric

Chicago Electric 96697 Installationshandbuch

Chicago Electric

Chicago Electric 94245 Bedienungsanleitung

Chicago Electric

Chicago Electric Double Cut Saw 68316 Montageanleitung

Chicago Electric

Chicago Electric 97200 Installationshandbuch

Chicago Electric

Chicago Electric 90186 Bedienungsanleitung

Chicago Electric

Chicago Electric 96971 Installationshandbuch

Chicago Electric

Chicago Electric 91938 Bedienungsanleitung

Chicago Electric

Chicago Electric 61970 Montageanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung