CHIEF PSMH-2046 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com PN: 8805-000020 Rev. B

Figure 2

PSMH-2046

PLASMA DISPLAY STATIC MOUNT

(4) PSM-2042 Static Wall Mount for 42” NEC (4) PAC-126 36” Lateral Shift Accessory

PSM-2042 (each)

(1) Plasma Static Mount (1) 10-24 x .5 FH Undercut Screw

(1) Latching Flag (1) 10-24 Nylock Nut

(8) Mounting Buttons-Yellow (8) M4 x 25mm Phillips Head Cap Screws

(1) Nylon Washer

PAC-126 (each)

(2) Lateral Shift Extrusion (4) Hex Nut, 5/16-18

(4) Washer, 5/16 (4) T-slot Nut, 5/16-18

(4) Lock Washer, 5/16 (4) Panhead Screw, self tapping #8 x .25

(4) Threaded Stud, 5/16-18

BEFORE PROCEEDING: Unpack each carton; verify contents shown

in Figure 1. If you are missing any of the listed components, please contact

Customer Service at 1-800/582-6480. Disregard individual installation

instructions in PSM-2042s and PAC-126s. Follow this instruction manual for

installation of PSM-2046 for your NEC 84” screen array.

PLASMA DISPLAYS ARE EXTREMELY FRAGILE.

WARNING!

For each of your NEC 42” Plasma Displays.

1. Attach latching flag to PSM (see Figure 2) and tighten the nut and screw until friction will hold the flag

in place.

2. Attach mounting buttons to display using one Phillips head screw per mounting button (see Figure 3).

CAUTION!

Figure 1

Your mounting structure must be capable of supporting 4

times the weight of the plasma and the mount.

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7 Figure 8

Installing Lateral Shift Extrusions on Wall

1. Install the top two lateral shift extrusions to the wall; drill about 3” below the level you would like the

top of the screen to sit, making sure both are level and allow a T-slot Nut to slide freely between each

extrusion (see Figure 4). You may use the existing slots located in the extrusions for installation. If

necessary, drill holes in the aluminum extrusion using the grooves located between each slot.

2. Install the remaining six lateral shift extrusions (see Figure 5).

3. Place four T-slot nuts and threaded studs in each extrusion pair (see Figure 6).

4. Install #8 x .25” self-tapping screws in outside holes of extrusions to retain T-slot assemblies in track

(see Figure 7 & Figure 8). Disregard the eight extra screws.

Figure 9 Figure 10

Figure 11

5. Install PSM-2042 brackets using regular and lock washers as well as 5/16-18 nuts, making sure to not

over tighten the nuts since you will want to slide the screens together to form the 84” array (see

Figure 9 & Figure 10).

6. Make sure the latching flags are lowered to the side before attempting to the place display on mount.

7. With the aid of another person, lift the first display up to the lower left mount. Align the mounting

buttons on the display with the teardrop slots in the mount and set the display into place (see

Figure 10).

8. Install remaining displays in order shown in Figure 10.

9. Raise the latching flags to secure displays.

10. Slide displays together to form 84” diagonal array (see Figure 11).

Inhaltsverzeichnis

Andere CHIEF Rack & Stand Handbücher

CHIEF

CHIEF FCA810V Bedienungsanleitung

CHIEF

CHIEF PAC260D Bedienungsanleitung

CHIEF

CHIEF FHP18-110 Bedienungsanleitung

CHIEF

CHIEF CMA-395 Bedienungsanleitung

CHIEF

CHIEF Wall Mount PDWP MB 46 P Bedienungsanleitung

CHIEF

CHIEF CMA450 Bedienungsanleitung

CHIEF

CHIEF FCD100 Bedienungsanleitung

CHIEF

CHIEF Single Stud Wall Arm CTA-025 Bedienungsanleitung

CHIEF

CHIEF CM-7 Bedienungsanleitung

CHIEF

CHIEF CM7W12U Bedienungsanleitung

CHIEF

CHIEF FCC100 Bedienungsanleitung

CHIEF

CHIEF SLMU Bedienungsanleitung

CHIEF

CHIEF Fusion Series Bedienungsanleitung

CHIEF

CHIEF FCA650 Bedienungsanleitung

CHIEF

CHIEF PACCC1 Bedienungsanleitung

CHIEF

CHIEF MSP-DCCUST1 Bedienungsanleitung

CHIEF

CHIEF J Series Bedienungsanleitung

CHIEF

CHIEF PWRSKU Bedienungsanleitung

CHIEF

CHIEF Flexlink KXD220 Bedienungsanleitung

CHIEF

CHIEF MSP-WRTS1 Bedienungsanleitung

CHIEF

CHIEF FRA Bedienungsanleitung

CHIEF

CHIEF CMSZ006 Bedienungsanleitung

CHIEF

CHIEF Kontour KRA226 Bedienungsanleitung

CHIEF

CHIEF MSP-DCCFTP-Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung