Child Craft F50001 Bedienungsanleitung

AB20030_G1A

AB20030_G2B

Assembled as a Crib

Assembled as a Twin Size Bed

Foundations®Worldwide, Inc.

5216 Portside Dr, Medina Oh 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.childcraftbaby.com

London Euro Compact Size Crib

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations®strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.childcraftbaby.com or Call Foundations

®for

assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through

Friday, 9:00 a.m.– 4:00 p.m. Eastern Time). Please

have the model number and manufacture date

available when you call or write us at:

Foundations®, 5216 Portside Dr. Medina Oh. 44256

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR FEDERAL SAFETY STANDARD

COMPLIANCE CERTIFICATES, PLEASE VISIT

OUR WEBSITE AT

www.foundations.com

Record the information for your product here:

Model number:

Manufacture date:

PO number:

• Adult assembly required.

• Read all instructions BEFORE assembly and USE

of product. KEEP INSTRUCTIONS FOR FUTURE

USE.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

AB20030E

Models Covered: F50001

A. 4mm Allen Wrench

B. Flat Washer

C. Spring Bracket (Left)

D. Spring Bracket (Right)

E. Flat Head Machine Screw

F. 6mm Connector Nut

G. 6mm x 40mm Allen Head Bolt

H. 6mm x 14mm Allen Head Bolt

I. 6mm Connector Nut

J. 6mm x 70mm Allen Head Bolt

K. Stationary Side Assy

L. End Panel Footboard

M. End Panel Headboard

N. Spring

O. Mattress

AB20030_G3A

BCD

Hardware Package

AB20030_G4A

Crib Parts

PARTS LIST

Part Description Part Number Quantity

11200070

11200081

11200074

11200075

11200356

11200331

11200362

11200328

11200330

11200332

22300903

22300910

22300998

11200345

21100037

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list. Construct

Note: during the assembly process whenever

using screws or bolts, Check each with the parts list

or bolt on the diagram of the item which is sketched

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly

DO NOT return your product to the dealer.

Please identify the London Euro crib by the model

the Stationary Sides Assemblies when you call or

write to Foundations®. Make note of all

identification numbers and include this information

with your request.

DO NOT Substitute Parts!

Note:

Do Not discard spare parts as they may be used for

Note: Items I and J will only be needed if Crib is

converted to a Twin Bed after the Crib is no longer

needed. Save for future use.

SUGGESTED TOOLS

#2 Medium Straight Screwdriver

STEP 1

Figure 1

Attach Spring Bracket-Right (D) and Spring

Bracket-Left (C) to Spring (N) using a Flat Head

Machine Screw (E), a Flat Washer (B) and a

Connector Nut (F).

Note: Each Flat Head Machine Screw (E) has a

friction enhancing patch applied to the thread which

will cause some resistance during the tightening

process.

Tighten each bracket until it is secure, but allows

the bracket to be easily rotated by hand. Place each

bracket at a 45º angle as shown.

See Figure 1.

AB20030_G5A

Pouches are on top

surface with printed

text facing up.

Top surface

shown up.

Bottom surface

shown up.

See enlarged

view.

45°

Figure 3

STEP 3

AB20030_G7

Assembly

from Step 2.

Attach an End Panel Footboard (L) to the opposite

side of Stationary Side Assembly (K) using two (2)

of Connector Nuts (F) and two (2) Allen Head Bolts

(G) as shown in diagram. Tighten securely using

Allen Wrenches (A).

See Figure 3.

STEP 2

Figure 2

AB20030_G6A

Attach an End Panel Headboard (M) to a Stationary

Side Assembly (K) using two (2) of Connector Nuts

(F) and two (2) Allen Head Bolts (G) as shown in

diagram. Tighten securely using Allen Wrenches

(A).

See Figure 2.

STEP 4

Figure 4 AB20030_G8

Gand Fare

shown installed

on this assembly.

Attach the second Stationary Side Assembly (K)

following the same process described in earlier

steps. Use a total of four (4) Connector Nuts (F)

and a total of four (4) Allen Head Bolts (G). Tighten

all areas securely using Allen Wrenches (A).

See Figure 4.

Figure 5

STEP 5

AB20030_G9A

Follow this

process to

install an

Allen

Bolt H

at each

of the four

corners of

Spring

Assembly N.

Pouches are on top

surface with printed

text facing up.

Assistance by a second person is recommended for

this step.

There are two (2) possible height locations for

Spring Assembly (N). Select the height which is

appropriate for the child. Refer to warning before

installation for additional information. Angle Spring

Assembly (N) (from Step 1) carefully down into crib

as shown in upper diagram.

Attach all four (4) Brackets (C) and (D) at the same

height as shown in lower diagram. Allen Head Bolts

(H) will thread into a factory installed threaded

insert. Tighten each Allen Head Bolts (H) securely

with Allen Wrenches (A).

To adjust height of Spring Assembly (N), remove

all four (4) Allen Head Bolts (H). Then move Spring

(N) to the other height adjustment location. Reinstall

Allen Head Bolts (H) at this location following the

same process outlined in this step above.

See Figure 5.

Figure 7

STEP 7

AB20030_G11A

Before installing Mattress (O), read all warning and

information on maintenance on pages 7 and 8.

Crib is now ready for use.

Figure 6

STEP 6

AB20030_G10

Install two (2) Connector Nuts (F) and two (2) Allen

Head Bolts (H) in each post on End Panel (L) as

shown. Tighten securely using Allen Wrenches (A).

See Figure 6.

Twin Bed Conversion

Figure 8

AB20030_G12A

End Panel Headboard M

(now becomes

Twin Bed Headboard)

Flat edge will face

outward.

Bed Rail Kit

(purchased separately)

End Panel Footboard L

(now becomes

Twin Bed Footboard)

Curved edge will face

outward.

Allen Bolt Hand

Connector Nuts F

can be used to fill the

empty holes where

Stationary Side Assembly

Khad been attached.

Install one of each item

from opposite sides of

posts and thread items

together securely with

Allen Wrenches A.

Allen Bolts Jwill attach

Bed Rails (two (2) at

each post).

These bolts will thread into

Joint Connector Nuts Iwhich

will be installed inside face

of Bed Rail.

If the crib is no longer needed for the child, then

this crib can be converted to a Twin Size Bed. To

complete the conversion, a Bed Rail kit must be

purchased from Foundations.

The crib should be disassembled with all parts

stored away except for the following:

1 End Panel Footboard (L)

1 End Panel Headboard (M)

8 Joint Connector Nuts - 6 mm (I)

8 6mm Allen Head Bolts (J)

Follow the assembly process outlined in the

assembly instructions included with the Bed Rail kit.

Maintenance Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure.

Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after

assembly and frequently during use.

DO NOT use crib if any parts are missing or broken.

If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.

Call Foundations® at 330.722.5033 and include model identication numbers recorded on page 1.

DO NOT substitute parts.

CLEANING:

Mix a mild solution of gentle dish washing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a

soft dry cloth.

DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s

skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne

furniture.

STORAGE:

When storing crib use Caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away

from any wood furniture item.

After completing the assembly the user is advised to read and be aware of

ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these

directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the

crib spring for the permanent storage of the assembly directions. Please place the complete set of

assembly directions into the pouch for future referral. We caution the user to Not place excess

hardware in the pouches as it could present danger to the child if retrieved.

Meets CPSC

Safety Requirements

5216 Portside Dr.

Medina Ohio 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.childcraftbaby.com

Failure to follow these warnings and the instructions could result in serious injury or death!

WARNING:Infants can suffocate.

•

In gaps between a mattress too small or too thick and sides of crib.

•

On soft bedding.

•

NEVER add a mattress, pillow, comforter or padding.

• The crib, including side rails, must be fully erected prior to use.

• Make sure latches are secure (if your crib either folds for storage or transport or has a moveable side for

easy access to child).

• Strings can cause strangulation! NEVER place items with a string around a child’s neck such as hood

• Discontinue use of the crib when child is able to climb out or reaches the height of 35 inches (89 cm).

• Child can become entrapped and die when improvised netting or covers are placed on top of product.

NEVER add such items

• When child is able to pull to standing position, set mattress to lowest adjustment position and remove

bumper pads, large toys, and other objects that could serve as steps for climbing out.

• NEVER place crib near window where cords from blinds or drapes can strangle a child.

• Replace teething rail if damaged, cracked or loose (if equipped with teething rails).

•

Use ONLY the mattress provided by the manufacturer (which must be at least 37-3/4 inches (96 cm) long by 23-3/4

inches (60.4 cm) wide and not more than 3 inches (7.6 cm) thick.

• Always provide the supervision necessary for the continued safety of your child. When used for playing,

NEVER leave child unattended.

• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep,

unless otherwise advised by your physician.

• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn

mesh/fabric. Check before assembly and periodically during use. Contact Foundations for replacement

parts. Never substitute parts.

• NEVER leave child in crib with side lowered. Be sure side is in raised and locked position whenever child

is in product (if your crib has a moveable side).

•

purpose. They can cause suffocation.

• NEVER use a water mattress with this crib.

•

• DO NOT use crib near objects that child could reach or pull into crib and cause injury such as lamps,

•To avoid injuries, do not allow children to climb or play on or under the crib.

WARNINGS

Inhaltsverzeichnis

Andere Child Craft Inneneinrichtung Handbücher

Child Craft

Child Craft Kieran F03209 Bedienungsanleitung

Child Craft

Child Craft Penelope F06916 Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic Deux Nesting F09306 Bedienungsanleitung

Child Craft

Child Craft Surrey Hill F07009 Bedienungsanleitung

Child Craft

Child Craft Rustic Barn F28801 Bedienungsanleitung

Child Craft

Child Craft Forever Eclectic Halo Accent F09303 Bedienungsanleitung

Child Craft

Child Craft Legacy 12701 Bedienungsanleitung

Child Craft

Child Craft Atwood F01809 Bedienungsanleitung

Child Craft

Child Craft Denman F03602 Bedienungsanleitung

Child Craft

Child Craft Rockport F01402 Gebrauchsanweisung

Child Craft

Child Craft F04116 Bedienungsanleitung

Child Craft

Child Craft Redmond F02838 Bedienungsanleitung

Child Craft

Child Craft Universal Select F09428 Bedienungsanleitung

Child Craft

Child Craft F02816 Bedienungsanleitung

Child Craft

Child Craft Rockport F01409 Bedienungsanleitung

Child Craft

Child Craft Soho F04026 Bedienungsanleitung

Child Craft

Child Craft Cranbrook Chest F03302 Bedienungsanleitung

Child Craft

Child Craft Soho F03960 Bedienungsanleitung

Child Craft

Child Craft Kieran 5 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic F09009 Bedienungsanleitung

Child Craft

Child Craft Universal Select F09402 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic F09017 Bedienungsanleitung

Child Craft

Child Craft FOREVER Eclectic Geo Nesting F09305 Bedienungsanleitung

Child Craft

Child Craft ROCKPORT F01428 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung