SVG200SP+ SIP/IAX ATA Quick Start Guide
陈泽科技有限公司 www.stephen-tele.c m
Configure SVG200SP+ to make VoIP calls
WAN Config
Enter Network
WAN Config t set the WAN setting:
SVG200SP+ supp rts three different IP types: Static IP, Dynamic btain IP (DHCP) and PPP E. Y u can use either f these IP
types t c nnect the internet.
se Static IP:
----Select “Static”;
----Enter the SVG200SP+’s IP address in the “IP address” field.
----Set the “Netmask”, default 255.255.255.0
----Enter the SVG200SP+’s upper gateway IP address(f r example:R uter) in the “Gateway” field
----Key in the DNS inf rmati n in the “Primary DNS” and “Alter DNS” fields.
se DHCP:
----Select DHCP
If y u have a DHCP server in y ur netw rk, SVG200SP+ will aut matically btain the netw rk inf rmati n fr m y ur DHCP
server.
se PPPoE:
----Select PPP E
----Type y ur PPP E dialup inf rmati n in the PPP E setting fields:PPP E server( pti n), Username and passw rd.
Then the SVG200SP+ will c nnect t the internet thr ugh PPP E , and aut matically btain the
则
IP address , Netmask,
Gateway, Primary DNS and Alter DNS inf rmati n.
