Chipsee EPC-CM3-101 Bedienungsanleitung

Industrial PC

EPC/PPC-CM3-101

PN: CS12800RA101

Revision 1.1

www.chipsee.com

Contents

31. EPC/PPC-CM3-101

41.1. Product Overview

51.2. Ordering Options

51.2.1. Operating System

51.2.2. Optional Features

61.3. Specications

71.4. Power Input

81.5. Touch Screen

91.6. Connectivity

91.6.1. RS232/RS485/CAN

101.6.2. GPIO Port

111.6.3. USB Connectors

121.6.4. LAN Connectors

131.6.5. WiFi & BT Module

131.6.6. 3G/4G/LTE Module

141.7. TF Card Slot

151.8. Audio Connectors

151.9. Boot DIP Switch

161.10. Mounting Procedure

161.10.1. CS12800RA101E

161.10.2. CS12800RA101P

171.11. Mechanical Specications

171.11.1. CS12800RA101E

181.11.2. CS12800RA101P

191.12. Disclaimer

191.13. Technical Support

Chipsee IPC Page 2 of 19

EPC/PPC-CM3-101

Front View

Rear View

EPC/PPC-CM3-101

Chipsee IPC Page 3 of 19

Front View (Embedded Variant)

Rear View (Embedded Variant)

Product Overview

The Cortex -A53 Raspberry Pi series EPC/PPC-CM3-101 (PN: CS12800RA101) is a high-

quality industrial Pi PC. It features a 10.1” ve-point capacitive a touch screen with a

resolution of 1280 x 800 pixels and brightness of 500 cd/m .

Key Applications

Human Machine Interface HMI

Process Control

Process Monitoring

® ®

•

EPC/PPC-CM3-101 Product Overview

Chipsee IPC Page 4 of 19

HMI

IIoT node

Environmental Monitoring

PLC

Automotive applications

ATM…

It is available both as an embedded solution and as a device hosed in a casing with bezels,

thus facilitating dierent installation options:

Installation on an industrial cabinet

Integration with the existing equipment

The EPC/PPC-CM3-101 industrial Pi PC is based around the powerful Raspberry Pi

Compute Module 3, powered by the BCM2837 processor with a processor speed of 1.2GHz

and a 1GB RAM.

Ordering Options

Chipsee products can be customized during the ordering process. The product will be

shipped with the pre-installed factory defaults if no extra requirements are specied. The

table in the Specications section provides information about the default options bundled

with the product.

Operating System

This product comes with a pre-installed Debian OS. Chipsee software engineers have

created all the drivers, so every hardware feature is readily available for any standard

development tool.

If your project requires a dierent OS, please Contact us, and we’ll make a customized

version that suits your needs.

Optional Features

The EPC/PPC-CM3-101 industrial Pi PC does not include the 3G/4G/LTE modules by default.

These modules are optional and can be selected at the Chipsee store during the ordering

process.

•

Note

You can order EPC/PPC-CM3-101 from the ocial Chipsee Store or from your nearest distributor.



EPC/PPC-CM3-101 Ordering Options

Chipsee IPC Page 5 of 19

Specifications

The EPC/PPC-CM3-101 industrial Pi PC oers a board range of performance and connectivity

options for scalable integration, providing expandability according to future needs. Some of

the key features are listed in the table below.

Warning

Installation, repair, and maintenance tasks should be performed by trained personnel only.

Chipsee does not bear any responsibility for damage caused by inadequate handling of the product.



EPC/PPC-CM3-101

CPU Raspberry Pi CM3, CM3 Lite;

Raspberry Pi® CM3+, CM3+ Lite; 1.2GHZ

Storage 2 TF Cards slots2

RAM 1GB DDR

eMMC 8GB

Display 10.1” IPS LCD, 1280 x 800 resolution px, brightness 500 cd/m

Touch 5-point capacitive touch

USB 3 x USB 2.0 Host

LAN 1 x Channel 100M LAN

Audio 3.5mm Audio Out Connector, 2W Speaker Internal

Buzzer Yes

RTC Yes, High Accuracy RTC with Lithium Button Coin battery (lithium battery not

included)

RS232 4 x RS232 (1 debug port)

RS485 2 x RS485 (Optional 4 x RS485 at most)

CAN 1 x CAN1

GPIO 8 Channels, 4 Input, 4 Output

WiFi/BT Onboard WiFi/BT

HDMI 1 Channel

SATA II 1 Channel

3G/4G/LTE Supported, not mounted by default

Camera Yes, not mounted by default

Power Input From 6V to 36V

Current at 12V 700mA Max

Power Consumption 7W Typical

From -20°C to +70°C

EPC/PPC-CM3-101 Specications

Chipsee IPC Page 6 of 19

The CAN channel may be customized to to 2 CAN channels on request.

Chipsee designed one of the TF card slots for Lite version but it does not have an eMMC. We designed the

other one for storage expansion.

Power Input

The EPC/PPC-CM3-101 industrial Pi PC can be powered by a wide range of input voltages:

From 6V to 36V DC. There are two types of power input connectors. One is a 3 Pin, 3.81mm

screw terminal connector, and the other is a 2.1mm DC input head. The polarity and the

pinout is clearly marked on the housing of the CS12800RA101P version, as well as on the

board itself of the CS12800RA101E version, as shown in the gures below.

Figure 891: Power Input (embedded/enclosed version)

EPC/PPC-CM3-101

Working

Temperature

OS Debian

Dimensions

CS12800RA101E: 245 x 155 x 11mm

CS12800RA101P: 280 x 185 x 27.5mm

Weight

CS12800RA101E: 600g

CS12800RA101P: 1500g

Table 210 Key Features

Attention

Chipsee does not install a lithium battery by default, as we cannot ship products with batteries. We recommend you

buy it locally and install it by yourself. The lithium battery part number is CR1220. Please Contact us if you need help.



EPC/PPC-CM3-101 Power Input

Chipsee IPC Page 7 of 19

Note that the “+” sign represents the positive power input, and it is printed both at the

casing and as a silk-screen on the board of the embedded version. The “-” terminal is

shorted to the ground.

Touch Screen

The EPC/PPC-CM3-101 industrial Pi PC uses a 5-point capacitive touch screen. The gure

below shows the capacitive touch screen connected to the motherboard via the FPC

connector.

Figure 892: Capacitive Touch Connector

Power Input Denition

Pin Number Denition Description

Pin 1 Positive Input DC Power Positive Terminal

Pin 2 Negative Input DC Power Negative Terminal

Pin 3 Ground Power System Ground

Table 211 Power Connector

Note

The system ground “G” is connected to power negative “-” on board.

The central pin is positive.



Attention

A capacitive touch screen is susceptible to power noise and Electromagnetic Radiation (EMR). It may cause LCD ripples

or even capacitive touch malfunction. If using a capacitive multi-touch test application, you might notice the touch

points oat erratically across the display. There are several solutions to this problem:

Use a high-quality Power Adapter Unit (PSU) with low EMR. You can also provide power from a battery.

Make sure that the EPC/PPC-CM3-101 Power Input connector (pin 3) is properly connected to the Power System

Ground to provide sucient EMI shielding and eliminate the problem entirely.



EPC/PPC-CM3-101 Touch Screen

Chipsee IPC Page 8 of 19

Connectivity

There are many connectivity options available on the EPC/PPC-CM3-101 industrial Pi PC. It

has 3 x USB 2.0 Host (can be customized to Host or OTG), 1 x Channel 100M LAN (RJ45)

Ethernet connector supporting up to 1 Gbps, and 5 x UART terminals (RS232/RS485).

RS232/RS485/CAN

The serial communication interfaces (RS485, RS482, and CAN) are routed to a 16-pin

3.81mm terminal, as illustrated on the gure below.

Figure 893: Relation between serial pins on embedded vs. enclosed version of the EPC/PPC-CM3-101

Industrial PC

The table below oers more detailed description of every pin and its denition:

Bad GND problem can also be conrmed by touching pin 3 of the Power Input connector with one hand while

operating the capacitive touch screen with the other hand. In this case, the operator’s body acts as the Power

System Ground.

RS232 / RS485 / CAN Pin Denition:

Pin Number Denition Description

Pin 1 CAN1_L USB CAN Channel 1L signal

Pin 2 CAN1_H USB CAN Channel 1H signal

Pin 3 RS485_4+ USB UART4, RS485 +(A) signal

Pin 4 RS485_4- USB UART4, RS485 -(B) signal

EPC/PPC-CM3-101 Connectivity

Chipsee IPC Page 9 of 19

GPIO Port

The EPC/PPC-CM3-101 industrial Pi PC has a 10 Pin 3.81mm GPIO Connector, as shown on

the gure below. The table below gives details about the denition of every Pin.

Figure 894: GPIO Connector

RS232 / RS485 / CAN Pin Denition:

Pin 5 RS485_3+ USB UART3, RS485 +(A) signal

Pin 6 RS485_3- USB UART3, RS485 -(B) signal

Pin 7 RS232_2_RXD USB UART2, RS232 RXD signal

Pin 8 RS232_2_TXD USB UART2, RS232 TXD signal

Pin 9 RS232_1_RXD USB UART1, RS232 RXD signal

Pin 10 RS232_1_TXD USB UART1, RS232 TXD signal

Pin 11 CPU_RS232_1_RXD CPU UART1, CPU RS232 RXD signal

Pin 12 CPU_RS232_1_TXD CPU UART1, CPU RS232 TXD signal

Pin 13 CPU_RS232_0_RXD CPU UART0, CPU RS232 RXD signal

Pin 14 CPU_RS232_0_TXD CPU UART0, CPU RS232 TXD signal

Pin 15 GND System Ground

Pin 16 +5V System +5V Power Output, No more than 1A Current output

Table 212 Connectivity Section

GPIO Connector Pin Denition:

Pin Number Denition Description

Pin 10 VCC Isolated Power +5V Input

Pin 9 GND Isolated Ground

Pin 8 OUT1 Isolated Output 1

EPC/PPC-CM3-101 GPIO Port

Chipsee IPC Page 10 of 19

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chipsee Industrie-PC Handbücher

Chipsee

Chipsee PPC-A72-133-C Bedienungsanleitung

Chipsee

Chipsee PPC-A55-150 Bedienungsanleitung

Chipsee

Chipsee PPC-A55-133 Bedienungsanleitung

Chipsee

Chipsee CS-A55-BOX Bedienungsanleitung

Chipsee

Chipsee EPC/PPC-CM3-070 Bedienungsanleitung

Chipsee

Chipsee EPC-A72-101-C Bedienungsanleitung

Chipsee

Chipsee EPC/PPC-A9-097-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-156-C Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-133 Bedienungsanleitung

Chipsee

Chipsee PPC-A55-190 Bedienungsanleitung

Chipsee

Chipsee EPC-CM3-070 Bedienungsanleitung

Chipsee

Chipsee PPC-A9-121-U-C Bedienungsanleitung

Chipsee

Chipsee PPC-A9-215-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-101-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-173-C Bedienungsanleitung

Chipsee

Chipsee AIO-CM4-156 Bedienungsanleitung

Chipsee

Chipsee PPC-A72-133-P Bedienungsanleitung

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Chipsee

Chipsee PPC-A9-190-C Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-150 Bedienungsanleitung

Chipsee

Chipsee EPC/PPC-A72-070-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-150-C Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-236 Bedienungsanleitung

Chipsee

Chipsee EPC/PPC-A9-101-C Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung