Chipsee PPC-CM4-070-D Bedienungsanleitung
Contents
31. PPC-CM4-070-D
51.1. Product Overview
61.2. Ordering Options
61.2.1. Pi CM4 Module
61.2.2. Operating System
61.2.3. Optional Features
61.3. 7 inch CM4 Products Comparision
81.4. Specications
101.5. Power Input
111.6. Touch Screen
121.7. Connectivity
121.7.1. RS232/RS485/CAN
131.7.2. GPIO Port
161.7.3. USB Connectors
171.7.4. LAN Connectors
181.7.5. WiFi & BT Module
181.7.6. 3G/4G/LTE Module
201.7.7. Zigbee Module
211.7.8. Camera Connector
231.8. TF Card Slot
241.9. Audio Connectors
251.10. PROG Button
261.11. Mounting Procedure
271.12. Mechanical Specications
271.12.1. PPC-CM4-070-D
271.13. 3D Model
281.14. Disclaimer
281.15. Technical Support
®
Chipsee IPC Page 2 of 28
PPC-CM4-070-D
Front View
Rear View
PPC-CM4-070-D
Chipsee IPC Page 3 of 28
Side View 1
Side View 2
PPC-CM4-070-D
Chipsee IPC Page 4 of 28
Product Overview
The Cortex -A72 Raspberry Pi series PPC-CM4-070-D (PN: CS10600RA4070P-D) is a high-
quality industrial Pi PC. It features a 7” ve-point capacitive touch screen with a resolution of
1024 x 600 pixels and brightness of 500 cd/m .
Key Applications
Human Machine Interface HMI
Process Control
Process Monitoring
HMI
IIoT node
Environmental Monitoring
PLC
Automotive applications
ATM…
It is available both as an embedded solution and as a device hosed in a casing with bezels,
thus facilitating dierent installation options:
Installation on an industrial cabinet
Integration with the existing equipment
The PPC-CM4-070-D industrial Pi PC is based around the powerful Raspberry Pi Compute
Module 4, powered by the Quad Cortex -A72 processor with a processor speed of 1.5GHz.
® ®
2
•
•
•
•
•
•
•
•
•
•
•
®
®
PPC-CM4-070-D Product Overview
Chipsee IPC Page 5 of 28
Ordering Options
Chipsee products can be customized during the ordering process. The product will be
shipped with the pre-installed factory defaults if no extra requirements are specied. The
table in the Specications section provides information about the default options bundled
with the product.
Pi CM4 Module
The Pi Compute Module 4 appears in dierent versions depending on the size of the DDR4
and eMMC.
The PPC-CM4-070-D industrial Pi PC does not include the CM4 Raspberry Pi module by
default. If you would like to purchase it with a CM4, you can select it at the Chipsee store
during the ordering process.
Operating System
This product comes with a pre-installed Debian OS. Chipsee software engineers have
created all the drivers, so every hardware feature is readily available for any standard
development tool.
If your project requires a dierent OS, please Contact us, and we’ll make a customized
version that suits your needs.
Optional Features
The PPC-CM4-070-D industrial Pi PC does not include the 3G/4G/LTE modules by default.
These modules are optional and can be selected at the Chipsee store during the ordering
process.
7 inch CM4 Products Comparision
Chipsee provides two 7 inch Industrial Pi PCs, EPC/PPC-CM4-070 and PPC-CM4-070-D, here
is the comparison:
Note
You can order PPC-CM4-070-D from the ocial Chipsee Store or from your nearest distributor.
®
®
®
Warning
Installation, repair, and maintenance tasks should be performed by trained personnel only.
Chipsee does not bear any responsibility for damage caused by inadequate handling of the product.
PPC-CM4-070-D Ordering Options
Chipsee IPC Page 6 of 28
Product EPC/PPC-CM4-070 PPC-CM4-070-D
LAN 1 x LAN 2 x LAN
USB-A 2 x USB 2.0 2 x USB 3.0
GPIO 8 x Optical Isolated
GPIO
6 x Raspberry Pi CPU GPIO (Compatible with Pi GPIO Software
Libraries) or 8 x Optical Isolated GPIO
Connectors Distributed on
each side Mostly on the bottom side
Dimension 206 x 135 x 30mm 188.05 x 123.11 x 33.20mm, new case, small and compact
Table 248 Comparison Between the 7 inch CM4 Products
PPC-CM4-070-D 7 inch CM4 Products Comparision
Chipsee IPC Page 7 of 28
Specifications
The PPC-CM4-070-D industrial Pi PC oers a broad range of performance and connectivity
options for scalable integration, providing expandability according to future needs. Some of
the key features are listed in the table below.
PPC-CM4-070-D
CPU Raspberry Pi CM4, CM4 Lite; Quad Cortex-A72 at 1.5GHz
Storage Support for 1 x TF Card3
RAM 2/4/8 GB, Based on CM4
eMMC 16/32 GB, Based on CM4
Display 7” IPS LCD, 1024 x 600 resolution px, brightness 500 cd/m
Touch 5-point capacitive touch with 1mm Armored Glass
USB 2 x USB 3.0 Host, 1 x USB Type-C OTG
LAN 2 x Giga LAN
Audio 3.5mm Audio Out Connector, 2W Speaker Internal
Buzzer Onboard Buzzer, driven by GPIO
RTC
High accuracy RTC with farad capacitor, can work 1 week after power o (default).
High accuracy RTC with lithium coin battery, can work 3 years after power o
(optional).
RS232 Default to 2 x RS232, up to 4 x RS232
RS485 Default to 2 x RS4851, these 2 x RS485 can be congured as 2 x RS232
CAN 1 x CAN-BUS
GPIO Option 1: 4 x input, 4 x output from expander IC (optical isolated, DEFAULT).
Option 2: 6 x CM4 CPU GPIO (conict with option 1).
I2C Not Supported
WiFi/BT Supported but depending on the CM4 selected2
ZIGBEE Onboard Zigbee module, not mounted by default
HDMI Yes
SATA II Not Supported
3G/4G/LTE Supported, not mounted by default
Camera Yes, not mounted by default. Available on the board in the embedded PC.
Requires a customized case to be exposed in an enclosed PC.
Power Input From 9V to 36V
Current at 12V 700mA (max); 530mA (maximum backlight, idle); 400mA (minimum backlight, idle)
®
2
PPC-CM4-070-D Specications
Chipsee IPC Page 8 of 28
1
2
3
The RS485 circuit controls the Input and Output direction automatically, there’s no need to control it from
within the software.
The default product without the CM4 does not include a Wi-Fi/BT module. You can include a CM4 that has the
Wi-Fi/BT module at the Chipsee store during the ordering process.
Chipsee designed one TF card slot for CM4 Lite version which has no eMMC to boot OS.
PPC-CM4-070-D
Power
Consumption 8.4W (max); 6.36W (maximum backlight, idle); 4.8W (minimum backlight, idle)
Working
Temperature From 0°C to +60°C
OS Debian
Dimensions PPC-CM4-070-D: 188.05 x 123.11 x 33.20mm
Weight PPC-CM4-070-D: 700g
Table 249 Key Features
PPC-CM4-070-D Specications
Chipsee IPC Page 9 of 28
Power Input
The PPC-CM4-070-D industrial Pi PC can be powered by a wide range of input voltages:
From 9V to 36V DC. There are two types of power input connectors. One is a 3 Pin, 3.81mm
screw terminal connector, and the other is a 2.1mm DC input head. As shown in the
gure below.
Power Input
Note that the “+” sign represents the positive power input, and it is printed both at the
casing and as a silk-screen on the board of the embedded version. The “-” terminal is
shorted to the ground.
Power Input Denition
Pin Number Denition Description
Pin 1 Positive Input DC Power Positive Terminal
Pin 2 Negative Input DC Power Negative Terminal
Pin 3 Ground Power System Ground
Table 250 Power Connector
Note
The system ground “G” is connected to power negative “-” on board.
PPC-CM4-070-D Power Input
Chipsee IPC Page 10 of 28
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Chipsee Industrie-PC Handbücher
Chipsee
Chipsee PPC-A55-050 Bedienungsanleitung
Chipsee
Chipsee PPC-A72-236 Bedienungsanleitung
Chipsee
Chipsee PPC-A72-173-C Bedienungsanleitung
Chipsee
Chipsee PPC-A9-121-U-C Bedienungsanleitung
Chipsee
Chipsee EPC/PPC-A72-070-C Bedienungsanleitung
Chipsee
Chipsee PPC-CM4-236 Bedienungsanleitung
Chipsee
Chipsee PPC-A9-150-C Bedienungsanleitung
Chipsee
Chipsee EPC/PPC-CM3-070 Bedienungsanleitung
Chipsee
Chipsee EPC-A72-101-C Bedienungsanleitung
Chipsee
Chipsee EPC/PPC-A9-101-C Bedienungsanleitung
Chipsee
Chipsee PPC-CM4-101 Bedienungsanleitung
Chipsee
Chipsee EPC-CM3-070 Bedienungsanleitung
Chipsee
Chipsee PPC-A55-101 Bedienungsanleitung
Chipsee
Chipsee PPC-A9-215-C Bedienungsanleitung
Chipsee
Chipsee PPC-A55-156 Bedienungsanleitung
Chipsee
Chipsee PPC-A9-190-C Bedienungsanleitung
Chipsee
Chipsee PPC-A72-121-P Bedienungsanleitung
Chipsee
Chipsee EPC-CM4-050 Bedienungsanleitung
Chipsee
Chipsee PPC-A72-101-C Bedienungsanleitung
Chipsee
Chipsee PPC-A55-190 Bedienungsanleitung
