Chord SYMPHONIC Bedienungsanleitung

Chord Electronics

Product Communication | English

The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB. Great Britain.

+44 (0) 1622 721 444

info@chordelectronics.co.uk

chordelectronics.co.uk

Symphonic

Manual

V.1.0

Chord Electronics

Symphonic | Manual

2 // 28

Contents 0.0

1.0 Safety instructions 03

1.1 Introduction 04

1.2 Protection against liquids & heat 05

1.3 Dismantling & Radio 06

frequency interference

1.4 Connecting your equipment 07

2.0 Warranty 08

2.1 Warranty period & registering 09

your purchase

2.2 Making a claim & warranty exclusions 10

0.0 Contents

3.0 Getting to know Symphonic 11

3.1 Getting to know Symphonic 12

3.2 The top panel 13

3.3 The rear panel 14

4.0 Setting up Symphonic 15

4.1 Placement 16

4.2 Connecting an input to 17

Symphonic

4.3 Connecting Symphonic 18

to a pre ampliﬁer

5.0 How to navigate Symphonic 19

5.1 Basic navigation 20

5.2 Selecting the correct gain 21

5.3 Selecting the correct impedence 22

5.4 Selecting Input 23

5.5 Rumble ﬁlter 24

5.6 The LED window 25

6.0 Special features 26

6.1 Earthing point 27

Chord Electronics

Symphonic| Manual

1.1 Introduction

1.2 Protection against liquids & heat

1.3 Dismantling & Radio Frequency interference

1.4 Connecting your equipment

1.0 Safety

instructions

Safety instructions 1.0

3 // 28

Chord Electronics

USymphonic | Manual

4 // 28

Introduction 1.1

Our Symphonic

phonostage brings

advanced features

and our proprietary technology

to vinyl, enabling the easy

integration of turntables into any

system as our ﬂagship MC phono

stage.

Before operation, we strongly

advise you read this user manual

thoroughly.

We also recommend that you

store this user manual, along with

your original receipt of purchase,

in a safe place should you require

assistance in the future.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

Chord Electronics

Symphonic | Manual

Protection against

liquids & heat

1.2

Symphonic is not

protected against

liquids of any kind.

Never place containers of liquid

on Symphonic. Never allow

Symphonic to come into contact

with moisture or liquids; doing

so could result in electrocution

or damage to the Symphonic’s

internal circuitry.

Be aware that liquids, including

water that has dried, can leave

minerals that can aect the

PCB and other components,

which could eventually lead to

oxidisation and short-circuiting.

If the Symphonic comes into

contact with moisture or liquids,

immediately disconnect from

the mains power supply, and

connected equipment and

contact Chord Electronics for

further advice.

The Symphonic

has internal thermal

protection which will

shut down the unit in the event

of excessive temperatures

being reached. Never operate

the Symphonic near sources

of heat or naked ﬂames as this

will decrease the lifespan of the

internal components. It is advised

that you do not operate the

Symphonic in an area of direct

sunlight or on top of signiﬁcant

heat- producing devices.

Please be aware that it

is entirely normal for the

Symphonic to become warm

during use, particularly within

a stacked conﬁguration. If

you are concerned about the

temperatures, please switch the

device o or consider a dierent

placement.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

5 // 28

Chord Electronics

Symphonic | Manual

6 // 28

There are no user-

serviceable components

within the Symphonic

or its power supply. Dangerous

voltages/currents exist within

the Symphonic and its power

supply, posing a severe risk of

electrocution and/or ﬁre.

Never attempt to

open, dismantle or

apply internal third-

party devices to it or insert

anything other than the listed

interconnects or headphone

adapters within this user manual.

If the Symphonic develops a

fault or the casework becomes

damaged, immediately

disconnect from the mains

power supply and connected

equipment, and contact Chord

Electronics for further advice.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

Dismantling & radio

frequency interference

1.3

With a thick, solid aluminium

chassis, the Symphonic’s

casework largely protects the

sensitive internal circuitry from

radio frequency interference.

However, for optimal

performance, it is recommended

that the following points are

observed:

1. Consider placing the

Symphonic away from

wireless routers.

2. Separate the

Symphonic from

ampliﬁers using

toroidal transformers.

3. Operate mobile

phones at a distance

to avoid interference.

Although the Symphonic

is largely shielded, it

can generate radio

frequency interference that

may have an eect on radio

and television reception. If this

occurs, please reconsider your

placement.

Chord Electronics

Symphonic| Manual

Before connecting the

Symphonic to any equipment,

consult the manufacturer’s user

guide to conﬁrm compatibility.

When connecting the Symphonic

to any equipment, make sure that

all devices are o, including the

Symphonic.

Once connected, switch all

equipment on starting with

the source and ending with the

ampliﬁcation.

Initially, operate the any

connected equipment on its

lowest gain setting and lowest

volume setting, gently increasing

to a comfortable listening level.

Never operate connected

equipment to the Symphonic

at excessive sound levels;

permanent hearing damage and

loss can occur.

The included 16V 4000mA

power supply simply plugs into

the Symphonic.

If the power supply is

prematurely disconnected

Symphonic may still remain

active for up to 15 seconds,

however, this may cause damage

to connected equipment.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

Connecting your equipment 1.4

Never disconnect the

power cable during

operation. Only

disconnect when Symphonic

is o. If the power cable

is disconnected during

operation there is a risk

of damage to connected

equipment.

7 // 28

Chord Electronics

Symphonic | Manual

2.1 Warranty period & registering your purchase

2.2 Making a claim & warranty exclusions

2.0 Warranty

Warranty 2.0

8 // 28

Chord Electronics

Symphonic | Manual

9 // 28

2.1 Warranty period & registering

your purchase

2.2 Making a claim & warranty

exclusions

Warranty period & registering

your purchase

2.1

At point of sale, Chord

Electronics Ltd. provides the

Symphonic with a comprehensive

ﬁve-year warranty* which

covers defects in materials and

workmanship through fair wear

and tear. The warranty will be

void if any other PSU other than

that supplied is used.

*The warranty is transferable

with proof of purchase, however

is not available on

ex-demonstration products.

Please use the form

below to record the

details of your purchase

in the event that these are

required at a later date, we

further advise that all purchases

are registered with Chord

Electronics at: chordelectronics.

co.uk/register-product/

RETAILER:

PURCHASE PRICE:

UNIT COLOUR:

DATE OF PURCHASE:

TRANSACTION ID:

Chord Electronics

Symphonic | Manual

In the unlikely event of a

claim, you must provide Chord

Electronics with the details of

the claim, including your original

proof of purchase and serial

number in order to validate the

nature of the repair.

Upon receipt, Chord Electronics

will make an assessment within

30 days and provide a reasonable

solution.

All warranty repairs must be

carried out by Chord Electronics

or an approved service centre to

guarantee the quality and safety

of the repair.

WARRANTY EXCLUSIONS: The

warranty does not cover connected

equipment, personal injury or

development natural patina of the

metalwork and will be null and void

if the following is applied: wilful

neglect; modiﬁcation or tampering

of the product; improper use of the

product; acts of God; damage caused

by a connected device; mechanical

shock; ﬁre or application of excessive

heat or repair/modiﬁcation by a non-

authorised third-party vendor.

2.1 Warranty period & registering

your purchase

2.2 Making a claim & warranty

exclusions

Making a claim

& warranty exclusions

2.2

10 // 28

Andere Handbücher für SYMPHONIC

Inhaltsverzeichnis

Andere Chord Phono-Vorstufe Handbücher

Chord

Chord SYMPHONIC Gebrauchsanweisung

Beliebte Phono-Vorstufe Handbücher anderer Marken

ANK

ANK L5 Gebrauchsanweisung

Musical Fidelity

Musical Fidelity M3X VINYL Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box S3 B Bedienungsanleitung

Lehmannaudio

Lehmannaudio Black Cube Statement Bedienungsanleitung

T+A

T+A R 2000 Series Bedienungsanleitung

Caledonian Audio

Caledonian Audio Phono Classique Bedienungsanleitung

Clearaudio

Clearaudio Absolute phono Bedienungsanleitung

DSA

DSA Phono III Bedienungsanleitung

Well Tempered Lab

Well Tempered Lab RIAA Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box Design Tube Box DS2 Bedienungsanleitung

Cary Audio Design

Cary Audio Design VT-500 Bedienungsanleitung

ALLNIC AUDIO

ALLNIC AUDIO H-3000V Bedienungsanleitung

Phasemation

Phasemation EA-320 Bedienungsanleitung

RSL

RSL Phono-Stage Bedienungsanleitung

Pro-Ject Audio Systems

Pro-Ject Audio Systems BOX-DESIGN Tube Box S2 Bedienungsanleitung

Aesthetix

Aesthetix IO Bedienungsanleitung

Rega

Rega FONO MM MK5 Bedienungsanleitung

Phasemation

Phasemation EA-300 Bedienungsanleitung