Christie Link Bedienungsanleitung

User Guide

020-102234-04

Christie Link

NOTICES

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this

document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary

depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on

information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied

warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection

with the performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified.

WARRANTY

Products are warranted under Christie’s standard limited warranty, the complete details of which are available by contacting your Christie dealer or Christie. In

addition to the other limitations that may be specified in Christie’s standard limited warranty and, to the extent relevant or applicable to your product, the

warranty does not cover:

a. Problems or damage occurring during shipment, in either direction.

b. Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras, DVD players, etc., or use

of a product with any non-Christie interface device.

c. Problems or damage caused by misuse, improper power source, accident, fire, flood, lightning, earthquake, or other natural disaster.

d. Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel or a Christie

authorized repair service provider.

e. Problems or damage caused by use of a product on a motion platform or other movable device where such product has not been designed, modified or

approved by Christie for such use.

f. Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product is protected from

precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended ambient temperature set

forth in the specifications for such product.

g. Defects caused by normal wear and tear or otherwise due to normal aging of a product.

The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold

by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or

(ii) the required international warranty fee has been paid.

The warranty does not obligate Christie to provide any on site warranty service at the product site location.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in

accordance with the maintenance schedule specified by Christie, will void the warranty.

REGULATORY

The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at the user’s own expense.

CAN ICES-3 (A) / NMB-3 (A)

이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.

ENVIRONMENTAL

The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical

and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according

to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the

environment we live in!

Content

Introduction...................................................... 5

Product documentation................................................5

Related documentation..............................................5

Important safeguards.................................................6

Installation safety and warning guidelines..................................6

AC power precautions...............................................6

Product overview................................................... 7

Key features...................................................... 7

List of components.................................................. 7

Installation and setup...............................................9

Operating environment................................................9

System overview....................................................9

Christie Link setup...................................................9

Boxer connection diagram.............................................10

Christie Link components..............................................11

Christie Link dashboard...............................................12

Christie Link menu..................................................12

Christie Link web dashboard............................................13

Christie Link LED status indicators........................................14

Christie Link input types..............................................15

Connecting Christie Link to the projector....................................15

Configuring system settings.........................................16

Configuring Christie Link network settings...................................16

Setting the date................................................... 16

Setting the time................................................... 16

Diagnostic tools and upgrading Christie Link............................17

Viewing Christie Link status............................................17

Upgrading the Christie Link software.......................................17

Running the Christie Link interrogator......................................17

Restoring factory default settings.........................................18

Christie Link Specifications......................................... 19

Christie Link User Guide 3

020-102234-04 Rev. 1 (06-2018)

Physical specifications................................................19

Power requirements.................................................19

Accessories...................................................... 19

Fiber specifications..................................................20

Regulatory.......................................................20

Safety....................................................... 20

Electro-magnetic compatibility........................................ 20

Environmental.................................................. 21

Signal connectivity specifications.................................... 22

HDMI 2.0 video formats.............................................. 22

DisplayPort video formats............................................. 23

Dual-input 3D.....................................................23

Content

Christie Link User Guide 4

020-102234-04 Rev. 1 (06-2018)

Introduction

This manual is intended for installers and operators of the Christie Link fiber optic system.

For complete Christie Link product documentation and technical support, go to

www.christiedigital.com.

Product documentation

For installation, setup, and user information, see the product documentation available on the Christie

Digital Systems USA Inc. website. Read all instructions before using or servicing this product.

1. Access the documentation from the Christie website:

• Go to this URL: http://bit.ly/2tlHckq or

https://www.christiedigital.com/en-us/products/accessories/christie-link-transmitter

• Scan the QR code using a QR code reader app on a smartphone or tablet.

2. On the product page, switch to the Downloads tab.

Related documentation

Additional information on this product is available in the following documents.

•Christie Link Product Safety Guide (P/N: 020-102249-XX)

•Christie Link Status System Guide (P/N: 020-02255-XX)

•Christie Link Serial Commands Guide (P/N: 020-102321-XX)

Christie Link User Guide 5

020-102234-04 Rev. 1 (06-2018)

Important safeguards

To prevent personal injury and to protect the device from damage, read and follow these safety

precautions.

Installation safety and warning guidelines

Read all safety and warning guidelines before installing Christie Link.

Warning! If not avoided, the following could result in death or serious injury.

• SHOCK AND FIRE HAZARD! Keep coaxial cables within the building installation, never routing

them to external sites.

• LASER RADIATION HAZARD! Do not exceed a Class 1/1M laser radiation rating for optical

module.

AC power precautions

Learn the safety precautions related to AC power.

Caution! If not avoided, the following could result in minor or moderate injury.

• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,

removing components, or opening any enclosure.

• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage

and current, as specified on the license label.

• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and

power plug meet the appropriate local rating standards.

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or

black and white.

General hazards

Hazard warnings also apply to accessories once they are installed in a Christie product that is

connected to power.

Fire and Shock Hazard

To prevent fire or shock hazards, do not expose this product to rain or moisture.

Do not alter the power plug, overload the power outlet, or use it with extension cords.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Electrical Hazard

Risk of electric shock.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Introduction

Christie Link User Guide 6

020-102234-04 Rev. 1 (06-2018)

General hazard.

Electrocution hazard. To avoid personal injury, always disconnect all power sources before

performing maintenance or service procedures.

Mandatory action

Disconnect all power sources before performing maintenance or service procedures.

Consult the service manual.

Product overview

The Christie Link provides a fully integrated fiber solution for long range video transport.

The Christie Link is intended to be used in conjunction with fiber optic cabling/module options and two

option cards, the CFIC or HBMIC to convert electrical signals to optical for transport across long

distances.

Key features

Understand the important features of the Christie Link.

• Supports HDMI and DisplayPort video input

• Allows HD to full 4K120Hz workflow

• Supports 3D video

• Includes a status LED

• Built-in keypad control interface

• Web user interface

• Ethernet

• Compatible with QSFP+ (40 Gbps) modules

List of components

Verify all components were received with the projector.

• Christie Link module

• Power cord

• User manual

Introduction

Christie Link User Guide 7

020-102234-04 Rev. 1 (06-2018)

For all accessories, refer to the specifications section.

Introduction

Christie Link User Guide 8

020-102234-04 Rev. 1 (06-2018)

Installation and setup

Learn how to install, connect, and optimize the settings.

Operating environment

Provides specifications for operating environment.

• 2 inch clearance from front intake

• 3 inch clearance from rear exhaust

• Ambient temperature (operating) 5 to 35° C (41 to 95° F) up to 1500 ft

• Humidity (non-condensing) 10 to 80%

• Operating altitude: 10,000 ft maximum at 5 to 25° C ambient

System overview

Christie Link transports DisplayPort or HDMI video signals over long distances through fiber optic

cabling using the Christie video over fiber data standard.

Christie Link setup

Understand the setup configuration.

1. Connect the DisplayPort or HDMI video source directly to the Christie Link module using

standard cabling.

2. Configure the Christie Link module and Christie projector with the appropriate QSFP+ modules.

3. Connect the Christie Link module to a Christie projector using a qualified fiber optic cable.

Christie Link User Guide 9

020-102234-04 Rev. 1 (06-2018)

Boxer connection diagram

The following solutions are for Boxer installations.

Install Christie Link to Boxer at 2K/4K 60 Hz and 2K/4K 120 Hz

Installation and setup

Christie Link User Guide 10

020-102234-04 Rev. 1 (06-2018)

Inhaltsverzeichnis

Andere Christie Sender Handbücher

Christie

Christie Terra Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung