Chroma Sandi 1622 Bedienungsanleitung

SandiTM QSG V2.0 QSG P/N: 1518-0702

Quick Start Guide

Chroma-Q®

Sandi™

For a full product manual please visit https://chroma-q.com

Part Number: CQ1518-1000, CQ1518-1100, CQ1518-1150

Model: 1518-1000, 1518-1100, 1518-1105

Software Version 1.3

SandiTM QSG V2.0 QSG P/N: 1518-0702

Overview

The Chroma-Q®Sandi™ is a cutting-edge white LED light fixture that provides homogenous soft

light. Whether you are attending an online meeting or casting yourself live, Sandi™ is the light

source to be used that can match with any background you might have.

Fig.1: Sandi™1622

Safety

Caution

1. This product is for professional use only. It is NOT intended for outdoor use.

Power Supply and Cabling

The Chroma-Q®Sandi™is powered by USB-C PD. Sandi is supplied with 90W USB C power

supply unit and a 100W rated cable. A phone or a tablet can be charged from the light fixture

through a USB A Port.

Mounting

The Sandi™ is a table top lighting fixture. It comes with a Phone Holder, Tablet / Monitor Holder.

The Phone Holder slides up/down along the slot of Monitor/ Tablet Holder. A VESA 100X100 or

75X75 monitor can be mounted on the monitor holder at five different heights. The maximum

size of the monitor is 22”.

Optics

The Sandi™ is built with a diffuser that provides a homogenized beam spread.

Control

Brightness or light intensity

Color temperature referred in this manual as CCT

2800K is more of a warm yellow tone, 6000K is more of a cold blue tone

Turning On/Off: The unit needs to be connected to a 90W (20V, 4.5A) power supply unit

through its USB-C port. Long Pressing (3 seconds) both knobs will turn off the unit. Pressing any

of the knobs will turn on the unit. The light fixture remembers the last state (Brightness and CCT)

when it was powered off.

Brightness and CCT of the whole Unit: The Sandi™ can be controlled through Front Control

Panel with OLED display. The Left-Knob is for controlling the brightness and the Right Knob is

for controlling the CCT. The knobs can be rotated or pressed.

By rotating the Left Knob clockwise / anti-clockwise, brightness can be increased / decreased by

1%. When the Brightness increase / decrease indicator shows UP (↑), the brightness will go up

by 10%, when the knob is pressed.

SandiTM QSG V2.0 QSG P/N: 1518-0702

The CCT can be increased by rotating the Right knob clockwise, 50K each step. When the CCT

increase / decrease indicator shows UP (↑), the CCT will increase by 500K, when the knob is

pressed.

Fig. 2: Front Control Panel (Balanced Idle mode: both sides have same Brightness and CCT)

Brightness of the Left and Right Side of the Fixture: Long pressing Left Knob will set mode

to Brightness Balance mode. By rotating/pressing the Left Knob, the brightness of the left side

can be controlled. Rotating/Pressing the Right Knob will allow controlling the brightness of the

right side.

Fig. 3: OLED Display at different modes

CCT of the Left and Right Side of the Fixture: Long pressing Right Knob will set CCT Balance

mode. By rotating/pressing the Left Knob the CCT of the left side can be controlled.

Rotating/Pressing the Right Knob will allow controlling the CCT of the right side.

Short Cut Key- Equalizing both Sides: Short Pressing both knobs will bring the Brightness

and the CCT of both sides to an equal value, by averaging their original values.

When the knobs are not turned or pressed for 15 seconds, while it is in Brightness or CCT

Balance mode, it will automatically go back to Idle mode.

Operation:

LEFT-HAND KNOB

RIGHT-HAND KNOB

•Clockwise to increase Intensity Level and to set

the direction of intensity Up (↑) when knob is

pressed

•Counter-clockwise to decrease Intensity Level

and to set the direction of intensity Down (↓)

when knob is pressed

•Press to decrease / increase Intensity by 10%

•Long Press to set Brightness Balance mode

•Clockwise to increase the CCT and to

set the direction of CCT Up (↑) when

knob is pressed

•Counter-clockwise to decrease CCT

and to set the direction of intensity

Down (↓) when knob is pressed

•Press to step up / down CCT by 500K

•Long Press to set CCT Balance mode

•Short Press both knobs for equalizing Brightness and CCT of both sides

•Long Press both knobs to turn off the unit

Further Information

Please refer to the Chroma-Q SandiTM manual for more detailed information. A copy of the manual

can be found at the Chroma-Q website –https://chroma-q.com/support/downloads

Left Knob

Right Knob

Brightness increase

/ decrease indicator

(if knob is Pressed)

Color Temperature

step up / down

indicator (if the knob

is Pressed)

Brightness

level indicator

Color Temperature

level indicator

Brightness

Balance mode

CCT Balance

mode

Unbalanced Idle mode (Left & Right

Side with different CCT/ Brightness)

SandiTM QSG V2.0 QSG P/N: 1518-0702

Approvals & Disclaimer

The information contained herein is offered in good faith and is believed tobe accurate.

However, because conditions and methods of use of our products are beyond our

control, this information should not be used in substitution for customer's tests to ensure

that Chroma-Q products are safe, effective, and fully satisfactory for the intended end

use. Suggestions of use shall not be taken as inducements to infringe any patent.

Chroma-Q sole warranty is thatthe product will meet the Chroma-Q sales specifications

in effect at the time of shipment. Your exclusive remedy for breach of such warranty is

limited to refund of purchase price or replacement of any product shown to be other

than as warranted.

Chroma-Q reserves the right to change or make alteration to devices and their

functionality without notice due to on-going research and development.

The Chroma-Q Sandi has been designed specifically for the lighting industry. Regular

maintenance should be performed to ensure that the products perform well in the

entertainment environment.

If you experience any difficulties with any Chroma-Q products please contact your

selling dealer. If your selling dealer is unable to help please contact

[email protected]. If the selling dealer is unable to satisfy your servicing needs,

please contact the following for full factory service:

Outside North America:

Tel: +44 (0)1494 446000

Fax: +44 (0)1494 461024

support@chroma-q.com

North America:

Tel: +1 416-255-9494

Fax: +1 416-255-3514

support@chroma-q.com

For further information please visit the Chroma-Q website at https://chroma-com.

Chroma-Q is a trademark, for more information on this visit

https://chroma-q.com/trademarks.

The rights and ownership of all trademarks are recognized.

Inhaltsverzeichnis

Andere Chroma Beleuchtungsausrüstung Handbücher

Chroma

Chroma Color Block 2 Bedienungsanleitung

Chroma

Chroma Studio One 100 T Bedienungsanleitung

Chroma

Chroma Color Block 2 Plus Nano Bedienungsanleitung

Chroma

Chroma Plus Bedienungsanleitung

Chroma

Chroma Space Force CQSPFVLR Bedienungsanleitung

Chroma

Chroma Studio Force V12 Bedienungsanleitung

Chroma

Chroma Inspire XT CHINHLRGBWXT Bedienungsanleitung

Chroma

Chroma Color Charge Bedienungsanleitung

Chroma

Chroma Inspire CHINHLRGBW32E Bedienungsanleitung

Chroma

Chroma Space Force 650-9070 Bedienungsanleitung

Chroma

Chroma Inspire XT Bedienungsanleitung

Chroma

Chroma Inspire CHINHLRGBW32A Bedienungsanleitung

Chroma

Chroma Color One 100 Bedienungsanleitung

Chroma

Chroma Studio Force D Phosphor Bedienungsanleitung

Chroma

Chroma Color Force 72 Bedienungsanleitung

Chroma

Chroma Studio Force D Compact Bedienungsanleitung

Chroma

Chroma Color Force Compact Bedienungsanleitung

Chroma

Chroma Color One 100 Bedienungsanleitung

Chroma

Chroma Color One 100X Bedienungsanleitung

Chroma

Chroma Color Split CHCS2 Bedienungsanleitung

Chroma

Chroma Inspire 632-9110 Bedienungsanleitung

Chroma

Chroma Chroma-Q Bedienungsanleitung

Chroma

Chroma Space Force Bedienungsanleitung

Chroma

Chroma Space Force onebytwo LumenRadio Card Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung