Exit with Save
Random PIN Code
（*）Enable HID
Enter Setup
1
CT10 Barcode Scanner Overview
Power
USB Port
Performance Characteristics:
Appearance:
2
Pairing with Windows xp
USB wired + Bluetooth wireless communication
Built-in FLASH memory, supports breakpoint r esume
Can store 1350 piec es of Code-128 codes under off line state
Supports Windows XP/7/8/CE, Mo bile OS PC and Android , iOS devices
Packing list:
CT10 -> 1 unit
USB cable -> 1 pi ece.
Quick Start G uide
Certifica te of Approval
Warranty Card
CT10 Barcode Scanner
Quick Start Guide
Note: The device is not equipped with a charging device. Please
charge the device via USB output charging equipment.
CT10
CT10 integrates high-performance processor and decoding board, it has fast decoding, high-precision reading ability, and high anti-interference ability. It can easily
read barcodes on paper, goods and other media. The DOF is a great improvement compared with similar products. It also boosts high scanning speed and powerful
reading ability with high accuracy.
Bluetooth Wireless mode USB Wired mode
Functions Setup:
CT10 Barcode Scanner can setup all default
functions through reading the setup barcodes.
Enter Setup
Read function barcode
Exit with Save
Bluetooth
Light Source (Laser)
Decode Capability
Resolution
Nominal Working Distance
Decode Rate
Scan width
Decode mode
Scan mode
Print Contrast Minimum
Scan angles
Cylinder Horizontal Scan
Indication
Radio Range
Interfaces Supported
Processor
EEPROM
Wireless Communication
Battery
Bluetooth class 2.1, Version +EDR
Laser LED 650+/-20nm
3mil
6~30cm
100 decodes per second
30mm
Single-Line Aiming
Auto off mode / Manual mode
30%
Roll 30° Pitch 75° Yaw65°
Diameter 35mm
Beeper, LED
10m Visual range
SPP, HID, USB2.0
ARM 7 72MHz
128K, can store thousands of barcodes
1400mAh lithium battery
Code bar, Code 11, Code 93, MSI, Code 128,
UCC/EAN-128, Code 39, EAN-8, EAN-13,
UPC-A, ISBN, Industrial 25, Interleaved 25,
Standard 25, 2/5 Matrix
HID and SPP dual mode data transmission
under Bluetooth class 2.1 protocol
1.If you want to setup the function of CT10. Read 'Enter Setup' barcode, then 'Function Setup' barcode, and close with the 'Exit with Save' bar code.
2.If the device has been paired with a Bluetooth device and needs to be paired with another Bluetooth devices, please restore factory settings and then re-pair.
Note:
4
Pairing with Android devices 6
Pairing with Windows 7/8
Exit without Save
www.cilico.us
1.Start CT10 barcode scanner.
2.Open Bluetooth panel in the PC, click ‘Add a device…’.
3.Click ‘Next’ to searching for the devices.
4.The computer will search Bluetooth devices automatically, A
few seconds later, you will find CT10 in the available devices list.
5.Double click CT10 device or click ‘Next’, select ‘Enter the
device’s paring code’, and input the pairing code 10010, click
‘Next’.
6.You will find a prompting at the lower right corner of your
computer desktop for adding a device. After around 5 seconds,
you will hear a beep from CT10, and the indicator from red to blue,
click ‘Finish’.
7.Pairing successfully, the indicator of CT10 becomes blue.
3
Pairing with Windows 7/8
1.Start CT10 barcode scanner, the indicator is red.
2.In the PC with Win7 OS, click ‘Start > Devices and printers >
Add a device’, search for CT10.
3.Double click CT10 device, input the paring code 10010 in the
Bluetooth pairing request dialog.
4.Click ‘Next’ or ‘OK’ button, you will hear a beep from CT10,
the paring successfully, and the indicator becomes blue.
(First way: data transmission speed is slower)
1.Start CT10 barcode scanner, the indicator is red.
2.Turn on the Bluetooth in Android devices, search for CT10
3.Input the paring code 10010 in the Bluetooth pairing request
dialog
4.Click ‘Next’ or ‘OK’ button, you will hear a beep from CT10,
the paring successfully. You will find CT10 in the paired devices
and is will show connected. The indicator becomes blue.
5
Pairing with iOS devices
1.Read ‘Enter Setup’ barcode, the
indicator become purple.
Enter Setup
One-click IOS connection Setup
Exit with Save
2.Read ‘One-click iOS Connection’
barcode.
3.Read ‘Exit with Save’ barcode, the
indicator become red.
4.Restart CT10 barcode scanner.
5.Turn on the Bluetooth in iOS devices,
search for CT10.
6.Click CT10 in available devices, it
will popup Bluetooth paring request
dialog with the PIN code
7.Find above mentioned numbers in
following barcodes, read them
continuously, and then read ‘Exit
without Save’ barcode, finish the
pairing. The indicator becomes blue.
(Second way: data transmission speed is faster)
1.Read ‘Enter Setup’ barcode, the indicator become purple.
2.Read ‘enable HID’ barcode.
3.Read ‘Random PIN Code’ barcode.
4.Read ‘Exit with Save’ barcode, the indicator become red.
5.Restart CT10 barcode scanner.
6.Turn on the Bluetooth in Win8, search for CT10.
7.Click CT10 in available devices, it will popup Bluetooth paring
request dialog with the PIN code
8.Find above mentioned numbers in above barcodes, read them
continuously, and then read ‘Confirm’ barcode, finish the pairing.
The indicator becomes blue.
