Cino FuzzyScan A770 Series Bedienungsanleitung

BARCODE SCANNER

FUZZYSCAN FAMILY

Quick Start Guide

Getting Familiar with Your FuzzyScan

Thank you for choosing Cino FuzzyScan Bar Code Scanner. All FuzzyScan

scanners deliver world-class performance for a broad range of applications to

unleash your productivity with ease.

FuzzyScan family includes Aseries area imager, F series linear imager and L

series laser imager. The Antimicrobial models are available for A770, L780

and F780 series scanners which are equipped with Disinfectant-ready

Housing and Vibrator. More over, the option of Vibrator is available for all

other series upon request. For more details, please visit our web site or

contact your supplier.

This document provides an easy reference for installation and operation

purpose. The complete documentation is available at www.cino.com.tw.

A770 Series F790/F780/L780 Series

F680/L680 Series F560 Series

Power Indicator Scan Window

Status Indicator Beeper Hole

Trigger Switch Cable Release Hole

Connecting to Your Host

FuzzyScan scanners support USB, PS/2(DOS/V) Keyboard Wedge and

RS-232 Serial interfaces. Please choose your desired interface cable, then

plug it into the interface port of scanner and connect it to the desired port of

your host. If you would like to remove the cable, please straighten one end of

a paper clip then insert it into the cable release hole to pull out the cable.

RS232 Serial

PS/2 Keyboard Wedge

USB HID & USB COM

yUSB HID (Human Interface Device)

The scanner works as a generic USB keyboard.

yUSB COM Port Emulation

The scanner works as a legacy RS232 serial device. Please note that you

have to install the USB Virtual COM software driver before using.

Using SmartStand

SmartStand is specifically designed for hand-free applications to maximize

user’s comfort and productivity. You can adjust the scanner holder to desired

position for optimized scanning.

Thanks to the Auto-sense design, the scanner is capable of switching

between presentation scanning and hand-held scanning automatically while

working with SmartStand. But please note that this function is not available

for F560 series scanners.

In presentation mode, the bar code may not be detected by the scanner in an

environment with very dim ambient lighting. You can select higher sensitivity

level through the setting of Presentation Sensitivity to increase scanner’s

detection sensitivity.

Level 3

Level 1 Level 6

Level 4

Level 2 Level 7

Level 5 ◆

For A series area imager, you can enable or disable the presentation

background lighting of scanner according to the ambient light condition in

presentation mode. When the ambient light is dim or dark, you can enable

this function to turn on the scanner’s LED illumination at a dim level. This is

helpful for scanner to detect the motion of scene.

Presentation Background Lighting

On ◆

Presentation Background Lighting

Off

Operation Modes area imager

FuzzyScan family A series array imager supports various operation modes,

including trigger, presentation, alternative, level, force, toggle, diagnostic, low

power and multiple read modes. The details of each operation mode are

listed below for reference.

Trigger Mode

When trigger mode is selected, the scanner goes into standby state after

scanning the bar code. You must press the trigger switch to turn on the light

source of the scanner before scanning the bar code.

Presentation Mode

When presentation mode is selected, the scanner is preset to turn on the

background lighting to detect the bar codes. Once the scanner detects an

image similar to a bar code, it will try to decode the bar code immediately.

Alternative Mode

When alternative mode is selected, the scanner keeps the light source on till

the preset “light source on time” is up. After turning off the light source, you

must press the trigger switch to turn on the light source again. After each

good read, the timer counter of light source on time is reset. You do not have

to press the trigger switch frequently. It is very useful for multiple scanning.

Level Mode

When level mode is selected, the scanner continues to turn on the light

source till a bar code is decoded or preset “light source on time” is up.

When a bar code is decoded successfully, the scanner turns off the light

source immediately. After the scanner turns off the light source, you have to

press the trigger switch to turn on the light source again. If there is no

scanning operation performed during the preset “light source on time”, the

scanner will turn off the light source after the preset light source on time is up.

Force Mode

When force mode is selected, the light source of the scanner is forced on for

continued operation without having to press the trigger switch. This mode is

convenient for high speed bar code reading.

Toggle Mode

When toggle mode is selected, you must press the trigger switch to turn on

the light source of the scanner to start scanning operation. The scanner

keeps the light source on until you press the trigger switch again. This mode

is very similar to alternative mode but without the preset light source on time

concern.

Diagnostic Mode

When diagnostic mode is selected, the light source of the scanner is forced

on without regard for other programmable parameters, such as reread delay,

redundancy, and so on.

Low Power Mode

When low power mode is selected, the scanner goes into idle state after

scanning the bar code. You must press the trigger switch to wake up the

scanner for operation.

Multiple Read Mode

When multiple read mode is selected, the scanner is allowed to decode

multiple bar codes with a single pull of the trigger. When you press and hold

the trigger to aim at a series of bar codes, the scanner will decode each bar

code and beep for each good read. For more precise bar code decoding, you

are recommended to enable Center Alignment function while multiple read

mode is selected. You also can enable Unique Bar Code Reporting function

to report only unique bar code when the scanner trigger is pressed. For the

setting of Center Alignmen and Unique Bar Code Reporing, please refer to

Programming Manual for details.

Operation Modes linear & laser imager

Both F series linear imager and L series laser imager of FuzzyScan family

support various operation modes, including trigger, presentation, alternative,

level, flash, force, toggle, diagnostic and low power modes. But please note

that the laser aiming line of L series is not performed under force, flash,

toggle or diagnostic mode to ensure the longer working life of laser imager.

Trigger Mode

When trigger mode is selected, the scanner goes into standby state after

scanning the bar code. You must press the trigger switch to turn on the light

source of the scanner before scanning the bar code.

Presentation Mode

When presentation mode is selected, the scanner will turn on the light source

and start scanning operation automatically if it detects an image similar to a

bar code. In case the scanner can’t detect a bar code, it will turn off the light

source when the preset light source on time is up.

Alternative Mode

When alternative mode is selected, the scanner keeps the light source on till

the preset “light source on time” is up. After turning off the light source, you

must press the trigger switch to turn on the light source again. After each

good read, the timer counter of light source on time is reset. You do not have

to press the trigger switch frequently. It is very useful for multiple scanning.

Level Mode

When level mode is selected, the scanner continues to turn on the light

source till a bar code is decoded or preset “light source on time” is up.

When a bar code is decoded successfully, the scanner turns off the light

source immediately. After the scanner turns off the light source, you must

press the trigger switch to turn on the light source again. If there is no

scanning operation performed during the preset “light source on time”, the

scanner will turn off the light source after the preset light source on time is up.

Flash Mode

When flash mode is selected, the scanner flashes the light source without

having to press the trigger switch. If the scanner detects an image which is

similar to a bar code, it forces on the light source automatically and scans the

bar code.

Force Mode

When force mode is selected, the light source of the scanner is forced on for

continued operation without having to press the trigger switch. This mode is

convenient for high speed bar code reading.

Toggle Mode

When toggle mode is selected, you must press the trigger switch to turn on

the light source of the scanner to start scanning operation. The scanner

keeps the light source on until you press the trigger switch again. This mode

is very similar to alternative mode but without the preset light source on time

concern.

Diagnostic Mode

When diagnostic mode is selected, the light source of the scanner is forced

on without regard for other programmable parameters, such as reread delay,

redundancy, and so on.

Low Power Mode

When low power mode is selected, the scanner goes into idle state after

scanning the bar code. You must press the trigger switch to wake up the

scanner for operation.

Keyboard Interface Quick Set

- Record Suffix -

None

RETURN ◆

TAB

SPACE

ENTER

- Keyboard Layout -

USA ◆

France

Germany

United Kingdom-UK

Canadian French

Spain (Spanish)

Spain (Latin America)

Nertherlands

Japan

Sweden/Finland

Serial Interface Quick Set

- Record Suffix -

None TAB

CR ◆SPACE

CRLF

- Baud Rate –

115.2K BPS 4800 BPS

19.2K BPS

57.6K BPS 2400 BPS

9600 BPS ◆

38.4 BPS 1200 BPS

- Data Frame -

8, None, 1 ◆7, None, 2

8, None, 2

8, Odd, 1 7, Odd, 2

7, Odd, 1

8, Even, 1 7, Even, 2

7, Even, 1

8, Space, 1 7, Space, 2

7, Space, 1

8, Mark, 1 7, Mark, 2

7, Mark, 1

Andere Handbücher für FuzzyScan A770 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cino Barcode-Lesegerät Handbücher

Cino

Cino F430 Series Bedienungsanleitung

Cino

Cino FuzzyScan F700 Series Bedienungsanleitung

Cino

Cino FuzzyScan F700BT Series Bedienungsanleitung

Cino

Cino Fuzzyscan MBC6890 series Bedienungsanleitung

Cino

Cino FuzzyScan A770 Series Bedienungsanleitung

Cino

Cino FUZZYSCAN F680 Series Bedienungsanleitung

Cino

Cino Fuzzyscan Bedienungsanleitung

Cino

Cino Fuzzyscan Bedienungsanleitung

Cino

Cino Fuzzyscan Bedienungsanleitung

Cino

Cino FuzzyScan F400 Series Betriebsanleitung

Cino

Cino FuzzyScan S680 Bedienungsanleitung

Cino

Cino FuzzyScan A780 Series Betriebsanleitung

Cino

Cino Fuzzyscan Bedienungsanleitung

Cino

Cino FuzzyScan F400 Series Bedienungsanleitung

Cino

Cino FuzzyScan F790WD Bedienungsanleitung

Cino

Cino FuzzyScan FM400 Programming Betriebsanleitung

Cino

Cino Fuzzyscan MBC6890 series Bedienungsanleitung

Cino

Cino FuzzyScan F400 Series Bedienungsanleitung

Cino

Cino Fuzzyscan Bedienungsanleitung

Cino

Cino FuzzyScan Fixed Mount 400 Series Gebrauchs- und Pflegehandbuch

Cino

Cino FUZZYSCAN F760 Series Bro Bedienungsanleitung

Cino

Cino FuzzyScan Series Bedienungsanleitung

Cino

Cino Fuzzyscan MBC6890 series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung