Circuitmess CircuitPet Bedienungsanleitung

Find your way around...

Turn it on!

Hardware test

If this is your first time turning on the CircuitPet, you should see the hardware test

pop up. This is a cool piece of software that will allow you to go through and make

sure that you've assembled your CircuitPet correctly! Follow the on-screen

instructions at each stage, and if you have any problems, double-check your

soldering!

When you turn on the CircuitPet, this is the first thing you'll see. This particular test is

here to ensure all of your buttons are properly soldered.

You should press all four of the CircuitPet's buttons you just soldered. If the

button is working properly, the circle representing it should turn green. If one of

CircuitPet usage guide

the circles does not turn green, one of the buttons is malfunctioning. In that case,

you should check your button's soldering joints.

The RGB LED will light up red, blue, and green after all of the circles on the screen

have turned green.

On the right side of the screen, there is a message that explains what you need to

see and what you should do next.

If you see all three colors coming from the RGB LED, click any of the buttons to

proceed.

And the final step in the hardware test is the sound test. You should hear a beeping

sound coming out of your CircuitPet.

If you hear the sound, click any of the buttons to proceed.

Everything appears to have been soldered correctly, so you can continue playing

with your virtual pet.

Setup

Using the switch located on the upper right side of CircuitPet, turn it on by pushing

the switch up.

Here is the photo that'll explain to you what each button and switch means.

Low battery? Let's charge your CircuitPet!

The USB-C cable is used for charging and programming your device. Insert the

other end of the cable into the power adapter!

After that, connect the power adapter to a power outlet to turn on your CircuitPet.

Settings

When you enter the Settings mode on your CircuitPet's menu, you'll be able to

change the volume and brightness of the LED and run the hardware test that you

should have done at the start of this guide.

If you later suspect that something is wrong with any of the components you

soldered to the board, you can check if everything works properly by enabling the

hardware test.

Click on this icon to access the Settings menu.

The settings menu looks like this:

1. Sleep time -After what time will your screen turn off; it saves energy. You can

adjust the sleep time or turn it off. If your screen goes dark, press any button to

bring it back to life.

2. Brightness -To adjust the brightness of the screen.

3. Sound -You can turn sound on and off.

4. RGB brightness -To adjust the brightness of the LED.

5. Hardware test -Perform this test if you suspect that any component is not

working properly. If you are unable to complete the test, you should check your

soldering joints. If you need assistance with making your CircuitPet work, please

6. Factory reset -Like on your phone, use this setting to delete everything from the

device.

7. Save - To save the changes.

Let the games begin!

Take care of CircuitPet!

CircuitPet, like any other pet, needs to be fed, oiled to keep it rust-free, and played

with.

On your CircuitPet, you'll find six pre-loaded minigames that will help you earn

much-needed XP. XP will help keep your CircuitPet happy and fed. You'll also be

able to level up your character and unlock new games.

When you first turn on your CircuitPet, all of the games will be locked, and you will

see the following:

First, you must oil your duck several times until you have enough XP to unlock the

first game.

This is a preview of what you'll see once you enter the oiling game:

You'll also receive instructions on how to oil the duck on display right away.

Andere Circuitmess Produkt zur naturwissenschaftlichen Bildung Handbücher

Circuitmess

Circuitmess Batmobile Bedienungsanleitung

Circuitmess

Circuitmess Wacky Robot Bedienungsanleitung

Beliebte Produkt zur naturwissenschaftlichen Bildung Handbücher anderer Marken

PASCO

PASCO ES-9080B Bedienungsanleitung

ARBOR SCIENTIFIC

ARBOR SCIENTIFIC 93-3501 Bedienungsanleitung

Alga Science

Alga Science SOLAREXPLORER Bedienungsanleitung

HAKUBUN

HAKUBUN magnet SA Bedienungsanleitung

Aurora

Aurora Plasma Globe Bedienungsanleitung

Dentsply Sirona

Dentsply Sirona Sim Multi Bench Bedienungsanleitung

PASCO

PASCO ME-7018 Bedienungsanleitung

laerdal

laerdal SimBaby Bedienungsanleitung

Einstein

Einstein LabMate+ Bedienungsanleitung

Limbs & Things

Limbs & Things PROMPT FLEX STANDARD Bedienungsanleitung

Horizon Educational

Horizon Educational EDUSTAK JUNIOR Bedienungsanleitung

FUTABA

FUTABA GYC441 Bedienungsanleitung

KMART

KMART Volcano Bedienungsanleitung

Bresser

Bresser Discovery 3-in-1 MicroViewer Bedienungsanleitung

Limbs & Things

Limbs & Things 61141 Bedienungsanleitung

PASCO

PASCO ME-9885A Bedienungsanleitung

BT BT-CSIS Bedienungsanleitung

Bresser

Bresser NATIONAL GEOGRAPHIC 9180850 Bedienungsanleitung