Circuitmess Batmobile Bedienungsanleitung

Batmobile Build Guide

The beginning

WELCOME TO CIRCUITMESS BATMOBILE BUILD GUIDE!

By following this build guide, you'll learn how to assemble your DIY autonomous robot car.

With Batmobile, you'll learn about complex mechanisms, such as:

●Artificial Intelligence

●Computer Vision

●Autonomous Driving

●Machine Learning

●Electronics & Coding

AGE GROUP

Like it says on the box, Batmobile is designed for anyone who's at least 7 years old.

You should approach some of the assembly steps carefully, so make sure to have an adult

jump in if you need some help with tightening the bolts later in the process. It's okay to ask

for help.

Don't worry, though! We'll go through the assembly step by step and provide some useful

tips along the way. We'll give you a heads-up if there's something important to keep in mind

while assembling.

ASSEMBLY TIME

It should take you approximately 1 hour to fully assemble your Batmobile.

Of course, the assembly time depends on your previous knowledge and experience.

If you don't have any experience yet, don't worry! It just might take you a little longer to get

into the groove and overcome the challenges in the beginning.

SKILLS

You don't need to have any specific skills before getting your hands dirty with this DIY

project.

The main objective here is to have fun and learn something new.

So hold on tight, read all the instructions, and get ready to have fun!

This is a great opportunity and your first step in your big engineering career.

LEARNING WITH BATMOBILE

As previously mentioned, Batmobile will teach you a few useful things in the following few

hours.

Here's what you'll learn:

●How to assemble your very own electronic device

●Microcomputers and other electronic components

●LED control

●How to control an electromotor using a microcomputer

●How autonomous cars work and how they navigate a road autonomously

●How to recognize and scan a QR code using your robot’s camera

●How to recognize different simple objects using a camera and image

processing algorithms

What's in the box?

LET'S MEET ALL THE COMPONENTS THAT ARRIVED IN

THE BOX!

Open your Batmobile box and check if you have all the components. Make sure to lay it all

on a clean surface where you'll inspect if everything is there according to the photo and the

list below.

In case something is missing, please contact us at contact@circuitmess.com. Send us a

photo of everything that came in the box, and we'll get back to you as soon as possible to

resolve the issue.

Here's the list of components:

1. Ball for tracking

2. Screwdriver

3. Four electromotors with gearboxes and wires

4. Tracking cards

5. USB-C cable for charging and programming the device

6. Batcontroller's PCB and Li-Po battery

7. Acrylic casings for Batcontroller

8. Speaker

9. Four wheels

10. Acrylic casing for Batmobile

11. Batmobile's injection molded plastic chassis

12. Batmobile's motherboard and Li-Po battery

13. LCD Display

14. Headlights board

15. Camera with a ribbon cable

16. Fire board with red LEDs

17. Six pushbuttons

18. Four spacers

19. Eight black bolts for Batcontroller

20. Small screws

21. Six bigger screws

22. Two black bolts for Batmobile

23. Two golden spacers

24. Switch cap

Assembly

Batcontroller

LET'S KICK OFF WITH THE EASIEST PART OF THE

BATMOBILE KIT - THE BATCONTROLLER.

You'll use Batcontroller to drive your Batmobile around, make him dance, and do other cool

things.

These are the parts you'll need to put Batcontroller together:

You can put the rest of the components aside; we won't be needing them yet. We'll let you

know when the remaining components are required.

To begin, you need to peel off the blue and white protective layers.

As you can see, each of the acrylic casing parts has a protective layer on both sides that

needs to be peeled off. They are not yet fully transparent, but they should be once you

finish this step!

Don't forget to remove the foil from the other side too!

The finished product should look like this (it must be completely transparent):

You must now repeat the process for the remaining acrylic casings.

Inhaltsverzeichnis

Andere Circuitmess Produkt zur naturwissenschaftlichen Bildung Handbücher

Circuitmess

Circuitmess CircuitPet Bedienungsanleitung

Circuitmess

Circuitmess Wacky Robot Bedienungsanleitung

Beliebte Produkt zur naturwissenschaftlichen Bildung Handbücher anderer Marken

PASCO

PASCO ES-9080B Bedienungsanleitung

ARBOR SCIENTIFIC

ARBOR SCIENTIFIC 93-3501 Bedienungsanleitung

Alga Science

Alga Science SOLAREXPLORER Bedienungsanleitung

HAKUBUN

HAKUBUN magnet SA Bedienungsanleitung

Aurora

Aurora Plasma Globe Bedienungsanleitung

Dentsply Sirona

Dentsply Sirona Sim Multi Bench Bedienungsanleitung

PASCO

PASCO ME-7018 Bedienungsanleitung

laerdal

laerdal SimBaby Bedienungsanleitung

Einstein

Einstein LabMate+ Bedienungsanleitung

Limbs & Things

Limbs & Things PROMPT FLEX STANDARD Bedienungsanleitung

Horizon Educational

Horizon Educational EDUSTAK JUNIOR Bedienungsanleitung

FUTABA

FUTABA GYC441 Bedienungsanleitung

KMART

KMART Volcano Bedienungsanleitung

Bresser

Bresser Discovery 3-in-1 MicroViewer Bedienungsanleitung

Limbs & Things

Limbs & Things 61141 Bedienungsanleitung

PASCO

PASCO ME-9885A Bedienungsanleitung

BT BT-CSIS Bedienungsanleitung

Bresser

Bresser NATIONAL GEOGRAPHIC 9180850 Bedienungsanleitung