Circutor Line-EDS-PS Bedienungsanleitung

INSTRUCTION MANUAL

(M259B01-03-20B)

Energy manager

line-EDS-PS

line-EDS-PSS

line-EDS-PSS-PRO

line-EDS-PSxxx

Instruction Manual

SAFETY PRECAUTIONS

DISCLAIMER

CIRCUTOR, SA reserves the right to make modifications to the device or the unit specifications set

out in this instruction manual without prior notice.

CIRCUTOR, SA on its web site, supplies its customers with the latest versions of the device specifica-

tions and the most updated manuals.

www.circutor.com

CIRCUTOR, recommends using the original cables and accessories that are supplied

with the device.

DANGER

Warns of a risk, which could result in personal injury or material damage.

ATTENTION

Indicates that special attention should be paid to a specific point.

Follow the warnings described in this manual with the symbols shown below.

If you must handle the unit for its installation, start-up or maintenance, the following should be

taken into consideration:

Incorrect handling or installation of the unit may result in injury to personnel as well as damage to the

unit. In particular, handling with voltages applied may result in electric shock, which may cause death

or serious injury to personnel. Defective installation or maintenance may also lead to the risk of fire.

Read the manual carefully prior to connecting the unit. Follow all installation and maintenance in-

structions throughout the unit’s working life. Pay special attention to the installation standards of the

National Electrical Code.

Refer to the instruction manual before using the unit

In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can result

in injury or damage to the unit and/or installations.

CIRCUTOR, SA reserves the right to modify features or the product manual without prior notification.

Instruction Manual

line-EDS-PSxxx

CONTENTS

SAFETY PRECAUTIONS .........................................................................................................................................................3

DISCLAIMER ..........................................................................................................................................................................3

CONTENTS.............................................................................................................................................................................4

REVISION LOG .......................................................................................................................................................................5

SYMBOLS...............................................................................................................................................................................5

1. VERIFICATION UPON RECEPTION....................................................................................................................................6

2. PRODUCT DESCRIPTION ................................................................................................................................................6

3. INSTALLATION OF THE DEVICE ......................................................................................................................................7

3.1.- PRELIMINARY RECOMMENDATIONS ........................................................................................................................7

3.2.- INSTALLATION .........................................................................................................................................................7

3.3.-72 x 72 mm PANEL ADAPTER ..................................................................................................................................8

3.4.- DEVICE TERMINALS.................................................................................................................................................9

3.5.- EXPANSION WITH OTHER DEVICES .........................................................................................................................9

3.5.1.- Line-M-EXT-PS POWER ADAPTER...............................................................................................................10

3.5.2.- INSTALLATION...............................................................................................................................................11

3.6.- CONNECTION DIAGRAM......................................................................................................................................... 13

4. OPERATION .................................................................................................................................................................. 14

4.1.- OPERATING PRINCIPLE .......................................................................................................................................... 14

4.2.- LED INDICATORS................................................................................................................................................... 14

4.3- DIGITAL OUTPUTS ................................................................................................................................................. 16

5. COMMUNICATIONS........................................................................................................................................................ 17

5.1- RS-485 COMMUNICATIONS..................................................................................................................................... 17

5.1.1.- CONNECTIONS............................................................................................................................................... 17

5.2- Wi-Fi COMMUNICATIONS.......................................................................................................................................18

5.2.1.- USAGE ENVIRONMENT AND HEALTH...........................................................................................................18

5.2.2.- Wi-Fi COMMUNICATIONS.............................................................................................................................. 18

6. CONFIGURATION WEBSITE............................................................................................................................................ 19

6.1- NETWORK SETUP................................................................................................................................................... 20

6.2- TIME SETUP............................................................................................................................................................ 21

6.3- ACTIVE MODE ......................................................................................................................................................... 21

6.4- SECURITY SETUP....................................................................................................................................................22

6.5- INFORMATION ........................................................................................................................................................22

7. TECHNICAL FEATURES ..................................................................................................................................................23

8. MAINTENANCE AND TECHNICAL SERVICE ...................................................................................................................25

9. GUARANTEE ..................................................................................................................................................................25

10. CE CERTIFICATE...........................................................................................................................................................26

line-EDS-PSxxx

Instruction Manual

REVISION LOG

Table 1: Revision log.

Date Revision Description

05/20 M259B01-03-19A First Version

07/20 M259B01-03-20A Changes in the following sections:

2.- 3.6. - 4.1.

11/20 M259B01-03-20B Changes in the following sections:

Note: The images on the devices are for illustrative use only and may differ from the original device.

SYMBOLS

Table 2: Symbols.

Symbol Description

In accordance with the relevant European directive.

In accordance with the CMiM directive.

Device covered by European Directive 2012/19/EC. At the end of its useful life, do not leave the

device in a household refuse bin. Follow local regulations on electronic equipment recycling.

Direct current.

~Alternating current.

Instruction Manual

line-EDS-PSxxx

1. VERIFICATION UPON RECEPTION

Upon reception of the device check the following points:

a) The device meets the specifications described in your order.

b) The device has not suffered any damage during transport.

c) Perform an external visual inspection of the device prior to switching it on.

d) Check that it has been delivered with the following:

- An installation guide

If any problem is noticed upon reception, immediately contact the transport com-

pany and/or CIRCUTOR’s after-sales service.

2.- PRODUCT DESCRIPTION

line-EDS-PSxxx is a device that works as connector between field devices with Modbus RTU or Mod-

bus TCP communications and the PowerStudio energy management software.

Circutor has 3 models:

line-EDS-PS, with embedded PowerStudio.

line-EDS-PSS, with embedded PowerStudio SCADA.

line-EDS-PSS-PRO, with embedded PowerStudio SCADA DELUXE.

The device features:

- 5 indication LEDs

- 2 digital outputs.

- RS-485 and Ethernet communications.

- Wi-Fi connection.

The line-EDS-PSxxx features a Web server to set up the device and display the variables of all the

modules or devices connected to it

line-EDS-PSxxx

Instruction Manual

3. INSTALLATION OF THE DEVICE

3.1.- PRELIMINARY RECOMMENDATIONS

In order to use the device safely, personnel operating it must follow the safety meas-

ures that comply with the standards of the country where it is to be installed; operators

must wear the required personal protective equipment (rubber gloves, approved facial

protection and flame-resistant clothing) to prevent injuries from electric shock or arcs

caused by exposure to current-carrying conductors, and they must heed the various

warnings indicated in this instruction manual.

The line-EDS-PSxxx device must be installed by authorised, qualified personnel.

The power supply plug must be disconnected before handling, altering the connections or replacing

the device. It is dangerous to handle the device while it is powered.

Cables must always be kept in perfect condition to avoid accidents or injury to personnel or installa-

tions.

The manufacturer of the device is not responsible for any damage resulting from failure by the user

or installer to heed the warnings and/or recommendations set out in this manual, nor for damage

resulting from the use of non-original products or accessories or those made by other manufacturers.

Do not use the device to perform any operation if you detect any anomaly or malfunction.

Before carrying out maintenance, repair or handling of any of the device’s connections,

the device must be disconnected from all power sources, both from the device’s own

power supply and the measurement’s.

Contact the after-sales service if you detect that the device is not working properly.

3.2.- INSTALLATION

The device must be installed on an electric panel or enclosure, attached to a DIN rail (IEC 60715).

When the device is on, its terminals, opening covers or removing elements may expose

the user to parts that are hazardous to touch. Do not use the device until it is fully

installed.

The device must be connected to a power supply circuit protected by gl type (IEC 269) or M type fuses,

between 0.5 and 2A. It must be fitted with a circuit-breaker or equivalent device to disconnect the

device from the mains supply.

The power supply circuit must be connected with a 1mm² minimum cross-section cable.

Instruction Manual

line-EDS-PSxxx

3.3.- PANEL ADAPTER 72 x 72 mm

Note: The 72 x 72 mm panel adapter is a separately sold accessory.

CIRCUTOR has a panel adapter for the line-EDS-PSxxx devices for their installation in 72 x 72 mm

panels.

Figure 1 illustrates how the panel adapter connects to a line-EDS-PSxxx.

Before installing the adapter, the device must be disconnected from all power and

measurement supplies.

Figure 1: Installation of the panel adapter.

Table 3: Technical characteristics of the Panel Adapter.

Technical Specifications

Protection degree IP40

Casing Self-extinguishing V0 plastic

68 mm

Figure 2: Cut in the panel.



line-EDS-PSxxx

Instruction Manual

3.4.- DEVICE TERMINALS

Ethernet

Figure 3: Device terminals: Upper - Lower.

Table 4: List of terminals.

Device terminals

A1: Power supply 21: 1, Digital output 1

A2: Power supply 20: 2, Digital output 2

24: A+, RS-485 19: C, Common of digital outputs

23: S, GND for RS-485 Ethernet, Ethernet connection

22: B-, RS-485

3.5.- EXPANSION WITH OTHER DEVICES

The line-EDS-PSxxx devices can be expanded with other devices in the line range, the line-CVM and

line-M expansion modules.

The line-EDS-PSxxx and line-CVM devices enable up to 2 expansion modules to be directly connected

to their right-hand side(1).

line-EDS line-M line-M line-M line-M

line-CVM

Figure 4: line-EDS-PSxxx and line CVM expansion module connection.

(1) Expansion module types: line-M-4IO-R, line-M-4IO-T, line-M-4IO-RV and line-M-4IO-A.

In installations with line-EDS-PSxxx devices,a total of up to seven devices may be connected to their

right-hand side.

Instruction Manual

line-EDS-PSxxx

line-EDS line-M line-M line-CVM line-M line-M line-CVM line-CVM

Figure 5: Typical installation of a line-EDS-PSxxx with 7 devices.

Note: An installation may only be fitted with one line-EDS-PSxxx device.

Note: In installations without line-EDS-PSxxx devices, only one line-CVM device may ne installed.

Note: All line-EDS-PSxxx and line-CVM devices must be connected to the auxiliary power supply.

3.5.1.- Line-M-EXT-PS POWER ADAPTER

Line-M-EXT-PS is a power adapter belonging to the line family of devices.The module connects to the

left-hand side of the devices to be fed. It can supply up to 10 VA, allowing it to power a limited number

of devices.

The maximum set it can supply is: 1 line-EDS-PSxxx + 1 line-CVM + 1 line-M (Figure 6).

line-EDS line-M

line-M-EXT-PS line-CVM

Figure 6: Maximum set a line-M-EXT-PS can supply.

Multiple line-M-EXT-PS devices can be connected to supply sets with power above 10VA. Each line-

M-EXT-PS will power the devices connected to its right-hand side (Figure 7).

line-EDS line-M line-M line-CVM line-M line-M line-CVM line-CVM

line-M-EXT-PS line-M-EXT-PS line-M-EXT-PS

Figure 7: Multiple line-M-EXT-PS connection.

Note: None of the line-EDS-PSxxx or line-CVM devices should be connected to the auxiliary power

supply.

line-EDS-PSxxx

Instruction Manual

Andere Handbücher für line-EDS-PS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Circutor Steuereinheit Handbücher

Circutor

Circutor line-M-4IO-R Bedienungsanleitung

Circutor

Circutor EDS-3G Bedienungsanleitung

Circutor

Circutor EDS Bedienungsanleitung

Circutor

Circutor EDS Merkblatt

Circutor

Circutor CDP-0 Bedienungsanleitung

Circutor

Circutor CBS-4 Series Bedienungsanleitung

Circutor

Circutor line-EDS-PS Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung