CIS Vision:mini VCC-F22U29APCL Kurzanleitung
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
UXGA Color Camera
49MHz Pixel Clock PoCL/PoCL-Lite
VCC-F22U29APCL
Product Specification
& Operational Manual
CIS Corporation
En
g
lish
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
2
Table of Contents
1. Scope of Application...............................................................................................................................3
2. Handling Precautions .............................................................................................................................3
3. Product Outline......................................................................................................................................4
4. Specification..........................................................................................................................................5
4.1. General Specification .......................................................................................................................5
4.2. Camera Output Signal Specification.....................................................................................................7
4.3. CCD Spectral Response (Representative value).....................................................................................8
5. Function Settings...................................................................................................................................9
6. External Connector Pin Assignment ....................................................................................................... 11
7. Timing Chart........................................................................................................................................ 12
7.1. Horizontal Synchronous Signal Timing................................................................................................ 12
7.2. Vertical Synchronous Signal Timing.................................................................................................... 12
7.2.1. Normal Shutter Mode (Trigger Shutter Mode OFF) ........................................................................... 12
7.2.2. Trigger Shutter Mode..................................................................................................................... 13
8. Remote Interface Function ................................................................................................................... 14
9. Initial Settings ..................................................................................................................................... 15
10. CCD Optical Axis Accuracy .................................................................................................................. 16
11. Dimensions........................................................................................................................................ 17
12. Cases for Indemnity (Limited Warranty)............................................................................................... 18
13. CCD Pixel Defect ................................................................................................................................ 19
14. Product Support................................................................................................................................. 19
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
3
1. Scope of Application
This is to describe VCC-F22U29APCL Power Over Camera Link color CCD Camera. All specifications contained
herein are subject to change without prior notice. Reproduction in whole or in part is prohibited.
2. Handling Precautions
The camera must not be used for any nuclear equipments or aerospace equipments with which mechanical
failure or malfunction could result in serious bodily injury or loss of human life. Our warranty does not apply to
damages or defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
zDo not use or store the camera in the following extreme conditions:
¾Extremely dusty or humid places.
¾Extremely hot or cold places (operating temperature –5 to +45 )℃℃
¾Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
¾Places subject to fluorescent light reflections.
¾Places subject to unstable (flickering, etc.) lighting conditions.
¾Places subject to strong vibration.
zRemove dust or dirt on the surface of the lens with a blower.
zDo not apply excessive force or static electricity that could damage the camera.
zDo not shoot direct images that are extremely bright (e.g., light source, sun, etc.), and when camera
is not in use, put the lens cap on.
zFollow the instructions in Chapter 6, “External connector pin assignment” for connecting the camera.
Improper connection may cause damages not only to the camera but also to the connected devices.
zConfirm the mutual ground potential carefully and then connect the camera to monitors or computers.
AC leaks from the connected devices may cause damages or destroy the camera.
zDo not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera.
zThe voltage ripple of camera power DC +12V±10% shall be within ±50mV. Improper power
supply voltage may cause noises on the video signals.
zPlease avoid noises like chattering when rising power.
In case of abnormal operation, contact the distributor from whom you purchased the product.
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
4
3. Product Outline
VCC-F22U29APCL is a high-resolution industrial color digital video camera module utilizing a 1/1.8 type PS IT
CCD. 2M pixels CCD image sensor with on-chip micro-lenses realizes high sensitivity and high resolution.
At Full Frame Scan Mode, entire pixels can be read out within approx. 1/20s. Interface of F22U29APCL
complies with camera link standard.
Key Features
□ Either PoCL or PoCL-Lite interface output can be selectable.
□ Camera settings can be changed via serial communications.
□ Selectable RAW and RGB 8 bit or 10 bit.
□ 1/20～1/40,000s shutter speeds can be set per 1H.
□ Full frame scan mode and three different partial scan modes are available.
□ Approx. 20 fps at full frame scan mode.
□ Only 29mm cubic in size (excluding projection), light weight 50g, and speed makes it a best match for
use in embedded systems.
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
5
4. Specification
4.1. General Specification
Item Specification
Pickup device
Device Type 1/1.8 type Interline Transfer color CCD, Sony ICX274AQ
Effective Pixel Number 1628(H) x 1236 (V)
Recommended Pixels 1620(H) x 1200(V)
Unit Cell Size 4.40μm (H) x 4.40μm (V)
Chip Size 8.50mm (H) x 6.80mm (V)
Video output frequency
Pixel Clock 49.0908 MHz
Horizontal Frequency 25.568KHz Pixel Clock: 1920 CLK
Vertical Frequency
Full Frame Scan Mode: 1252H, approx 20 Hz
Partial Scan Mode 1: 1029H, approx 25 Hz
Partial Scan Mode 2: 837H, approx 30 Hz
Partial Scan Mode 3: 629H, approx 40 Hz
Sync. system Internal Sync. System
Video output standard PoCL or PoCL-Lite
Resolution 1000 TV lines
Resolving power 8bit / 10bit at RAW data output. 8 bit at RGB data output.
Sensitivity F5.6 2000 lx (Shutter 1/20s, Gain 0dB)
Minimum illumination F1.4 20.0 lx (Shutter 1/20s, Gain +12dB)
Dust or stains in
optical system
No dust or stain shall be detected on the testing screen with setting the camera
aperture at F16.
Power requirements DC +12V ±10% (Max voltage not to exceed 15V)
Power consumption 2.7 W (DC +12V IN)
Dimension Refer to overall dimension drawing (Clause 11)
29mm x 29mm x 29mm (excluding projection)
Mass Approx. 50 g
Lens mount C mount (Refer to overall dimension drawing )
Optical axis accuracy Refer to drawing for CCD Optical Axis Accuracy (Clause 10)
Gain variable range -1～+12dB
Shutter speed
variable range
OFF (1/20), 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/18000,
1/40000s
Trigger shutter mode ・Fixed Trigger Shutter Mode ・Pulse Width Trigger Shutter Mode
*Trigger pulse width shall be over 1H and less than 1/2s.
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
6
Item Specification
Safety/Quality
standards
UL: Conform to UL Standard including materials and others.
RoHS: Conform to RoHS
CE: Conform to EN55022:2006 (Class A): Emission
Conform to EN61000-6-2:2005: Immunity
FCC: To be applied to FCC Class A digital Device
This device complies with Part 15 of the FCC Rules. Operation is subject to the
followin
g
two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, includin
g
interference that
may cause undesired operation.
Durability
Vibration
Acceleration 98 m/s2(10.0G)
Frequency 20～200 Hz
Direction XYZ 3 directions
Testing time 120 min for each direction
Shock No malfunction shall be occurred with 490m/s2(50G) for ±X, ±
Y, and ±Z, 6 directions. (without package)
Operation environment
Temperature Operation guaranteed: -5℃～+45℃
Performance guaranteed: 0℃～+40℃
Humidity RH 20～80% with no condensation
Storage environment Temperature -25℃～+60℃
Humidity RH 20～80% with no condensation
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
7
4.2. Camera Output Signal Specification
Item Specification
Video
output data
Video out 1628 (H) x 1236 (V) At Full Frame Scan Mode
Recommended 1600 (H) x 1200 (V)
Sync.
Signal I/O
LVAL output LVDS Camera Link connector
FVAL output LVDS
DVAL output LVDS
HD/VD input None
Trigger
input
Polarity POSI/NEGA Selectable
Min. Trigger Pulse width Over 1 HD
Camera Link input LVDS: CC1 input Camera Link connector
Video
output
signal
White Clip Level Digital 8bit : FFh
Digital 10bit : 3FFh
Setup Level Digital 8bit : 08 ±03h
Digital 10bit : 020 ±00Ch
【RAW Data Output Details】
DVAL(Horizontal)
DVAL(Vertical)
RGRGRGRG
GBGBGBGB
RGRGRGRG
GBGBGBGB
RGRGRGRG
5 seconds shall be waited after turning on power to get proper camera operation.
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
8
4.3. CCD Spectral Response (Representative value)
※ Lens characteristics and illuminant characteristics are not considered.
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
9
5. Function Settings
Camera functions can be set with serial data communications.
Gain 001
0: -1 dB
1: 0 dB
2: +6 dB
3: +12 dB
4: Manual Gain (Refer to Address 008)
E-Shutter 002
0: 1/20s (Off)
1: 1/50s
2: 1/100s
3: 1/250s
4: 1/500s
5: 1/1000s
6: 1/2000s
7: 1/4000s
8: 1/10000s
9: 1/18000s
10: 1/40000s
11～
15: 1/20s (Off)
16: Manual Shutter (Refer to Address 009&010)
White Balance 003
0: RAW data output (through) 5: RGB data output (through)
1: RAW data output (3200K) 6: RGB data output (3200K)
2: RAW data output (spare) 7: RGB data output (spare)
3: RAW data output (spare) 8: RGB data output (spare)
4: RAW data
manual white balance 9: RGB data
manual white balance
Trigger Mode 004
0: Normal Shutter Mode (Trigger Shutter Mode Off)
1: Fixed Trigger Shutter Mode
(Shutter speed can be set with address 002.)
2: Pulse Width Trigger Shutter Mode
(Shutter speed can be set with trigger pulse width.)
Scan Mode 005
0: Full Frame Scan Mode
1: Partial Scan Mode 1
2: Partial Scan Mode 2
3: Partial Scan Mode 3
Manual White Balance
R Gain Control 006 0～255 Covers variable range 2600～9000K.
Manual White Balance
B Gain Control 007 0～255 Covers variable range 2600～9000K.
VCC-F22U29APCL Rev.900-675-31-00
©2009 CIS Corporation. All rights reserved.
10
Manual Gain Control 008 0～
255: -1dB～+12dB ※Set the data of address 001 to 004.
Manual Shutter Control 009&
010
0～
1251:
1/20s～1/40000s
※Set the data of address 002 to 016.
Address 009 MSB and address 010 LSB makes 10bit in total.
Shutter Speed = (1251.6-Data) x 39.11μs
Max Data = 4E3h = 1251
Trigger Polarity 011 0: Positive Input
1: Negative Input
No Function 012 0: Fixed. Do not change.
Output Data Selection 013
0: *Set the data of Address 003 to 000～004.
RAW 8 bit output data 8 bit output data
1: RAW 10 bit output data
2: PoCL-Lite RAW 8 bit output data
3: PoCL-Lite 10 RAW bit output data
Trigger Reset Mode 014 0: H-Synchronous Mode
1: CLK-Synchronous Mode
Data Save 015 Input 083 to save address 000～014 into EEP-ROM.
Note: Please note the followings when using trigger shutter mode.
Re-triggering at H-Synchronous Mode shall be after 2H of CCD read out signal.
Re-triggering at CLK-Synchronous Mode shall be after completion of video output.
Trigger pulse width shall be within the range of over 1HD to less than 1/2 sec.
Inhaltsverzeichnis
Andere CIS Überwachungskamera Handbücher
CIS
CIS VCC-SXCL3R Kurzanleitung
CIS
CIS NDI DCC-4KNDI Montageanleitung
CIS
CIS VCC-HD5 Kurzanleitung
CIS
CIS DCC-HD3 Kurzanleitung
CIS
CIS VCC-HD1000A Kurzanleitung
CIS
CIS VCC-HD3N Kurzanleitung
CIS
CIS DCC-4KZM Kurzanleitung
CIS
CIS VCC-FC21U19OP Kurzanleitung
CIS
CIS VISION:mini VCC-F22S29APCL Kurzanleitung
CIS
CIS VISION:mini VCC-F22S29ACL Kurzanleitung
Beliebte Überwachungskamera Handbücher anderer Marken
CCTV Center
CCTV Center 27Z540 Series Bedienungsanleitung
VHD
VHD DA-S36 Bedienungsanleitung
Eagleye
Eagleye IS-NIPHB40NSC130 Series Bedienungsanleitung
JAI
JAI LQ-201CL Bedienungsanleitung
Uniq
Uniq UP-1800CL-12B Bedienungsanleitung
Hitachi Kokusai Electric
Hitachi Kokusai Electric SK-HD1200 Bedienungsanleitung
