Cisco WPC54G Original Betriebsanleitung
Wireless-G Adapter
Model: WPC54G
WPC54GS
WPC54GR
WUSB54G
WUSB54GR
WUSB54GC
WUSB54GSC
QUICK INSTALLATION
Package Contents
Wireless-G Notebook Adapter or
Wireless-G Notebook Adapter
with SpeedBooster or
Wireless-G Notebook Adapter
with RangeBooster
Wireless-G USB Network Adapter or
Wireless-G USB Network Adapter
with RangeBooster or
Compact Wireless-G USB Adapter or
Compact Wireless-G USB Network
Adapter with SpeedBooster
Setup Wizard CD-ROM
User Guide on CD-ROM
Quick Installation
•
•
•
•
INSTRUCTIONS FOR
WINDOWS VISTA™
USERS ONLY
The Adapter is installed and set up using the Setup Wizard on the
enclosed Setup Wizard CD.
This Quick Installation is for Windows Vista users only. If you have
Windows XP or 2000, use the other enclosed Quick Installation.
IMPORTANT: Do not install the Adapter in your computer
until you are instructed to do so, or the Adapter will not install
correctly.
Insert the Setup Wizard CD into
your CD-ROM drive.
NOTE: Windows Vista or other personal rewalls may ask for
permission to run the software or program. You will need to allow
the software to run in order to continue.
The Welcome screen appears on
your monitor.
NOTE: If asked, select your preferred
language. Then click Next or
Install.
Click the Click Here to Start
button.
A.
B.
Insert the CD-ROMInsert the CD-ROM
Click Here to StartClick Here to Start
Installation1�
Read the License Agreement,
and click Next to continue the
installation.
Follow the instructions for the
Adapter you have:
Wireless-G Notebook Adapter,
Wireless-G Notebook Adapter with SpeedBooster, or
Wireless-G Notebook Adapter with RangeBooster
Locate an available CardBus or
PCMCIA slot on your notebook
computer.
With the connector pin end facing
the slot and the label facing up,
slide the Adapter into the slot until
it locks into place.
Click Next and proceed to step E.
C.
D.
1.
2.
3.
License AgreementLicense Agreement
Insert the Wireless-G Notebook AdapterInsert the Wireless-G Notebook Adapter
Wireless-G USB Network Adapter or
Wireless-G USB Network Adapter with RangeBooster
Locate an available USB port on
your computer.
Connect the included USB cable
to the Adapter. Then connect the
other end to the computer.
Click Next, and proceed to step E.
Compact Wireless-G USB Adapter or
Compact Wireless-G USB Network Adapter with SpeedBooster
Locate an available USB port on
your computer.
Insert the Adapter into the USB
port.
Click Next, and proceed to step E.
1.
2.
3.
1.
2.
3.
Connect the Wireless-G USB Network
Adapter
Connect the Wireless-G USB Network
Adapter
Connect the Compact Wireless-G USB
Adapter
Connect the Compact Wireless-G USB
Adapter
After you install the Adapter
correctly, the Congratulations
screen appears.
Click Finish.
The first Windows Vista Wireless
Network Configuration utility
screen appears. Select your
network, and then click Connect.
If your network has no wireless
security, this screen appears. If your
network has wireless security, go to
step H.
To connect to your unsecured
network, click Connect Anyway
and go to step I.
E.
F.
G.
CongratulationsCongratulations
Select NetworkSelect Network
Unsecured NetworkUnsecured Network
If your network has wireless
security, this screen appears. Enter
the security key or passphrase (also
known as pre-shared key or WEP
key, depending on your type of
security).
Click Connect.
This screen appears while the
Adapter connects to your network.
Do not cancel, unless you want to
end the installation.
This screen appears when you are
connected to your network.
Select Save this network, if you
want to save your settings.
Click Close.
H.
I.
J.
Secured NetworkSecured Network
Connecting to NetworkConnecting to Network
Connected to NetworkConnected to Network
The Set Network Location screen
may appear to help apply the
correct settings for your type of
location. If it doesn’t appear, go to
step M.
Select Home, Work, or Public
location.
This screen varies according to the
selected location.
Click Close.
The Windows Vista Wireless
Network Configuration utility icon
appears on your desktop’s system
tray.
You can use this utility to configure
or change your wireless settings.
K.
L.
M.
Select Network LocationSelect Network Location
Network Settings SavedNetwork Settings Saved
Windows Vista Wireless Network
Configuration Utility Icon
Windows Vista Wireless Network
Configuration Utility Icon
Wireless Connection StatusWireless Connection Status
Website
http://www.linksys.com/international
For additional information or troubleshooting help, refer to the User Guide on the CD-ROM.
Additional support is also available via e-mail or by phone.
Linksys is a registered trademark or trademark of Cisco Systems,Inc.and/or its
affiliates in the U.S..and certain other countries. Copyright © 2007 Cisco Systems, Inc.
All rights reserved.Other brands and product names are trademarks or registered
trademarks of their respective holders.
Product Registration
http://www.linksys.com/registration
70815NC-JL
NOTE: For help with the Windows Vista Wireless Network
Configuration utility, refer to Windows Vista Help and Support, by
clicking Vista’s Start button > Help and Support.
Congratulations! Setup is complete.
Adaptador Wireless-G
Modelo: WPC54G
WPC54GS
WPC54GR
WUSB54G
WUSB54GR
WUSB54GC
WUSB54GSC
INSTALAÇÃO RÁPIDA
Conteúdo da embalagem
Adaptador para notebooks Wireless G ou
Adaptador para notebooks Wireless-G
com SpeedBooster ou
Adaptador para notebooks Wireless-G
com RangeBooster ou
Adaptador de rede USB Wireless-G ou
Adaptador de rede USB Wireless-G com
RangeBooster ou
Adaptador USB Wireless-G
compacto ou
Adaptador USB Wireless-G compacto
com SpeedBooster
CD-ROM do Assistente para configuração
Guia do usuário no CD-ROM
Instalação rápida
•
•
•
•
INSTRUÇÕES APENAS
PARA USUÁRIOS DO
WINDOWS VISTA™
O Adaptador é instalado e configurado usando o Assistente para
configuração incluído no CD do Assistente para configuração
fornecido.
Esta Instalação rápida destina-se apenas aos usuários do Windows
Vista. Se você tiver o Windows XP ou 2000, use a outra Instalação
rápida fornecida.
IMPORTANTE: não instale o Adaptador no computador até ser
instruído a fazer isso, ou o Adaptador não será instalado corretamente.
Insira o CD do Assistente para
configuração em sua unidade de
CD-ROM.
OBSERVAÇÃO: o rewall do Windows Vista ou outros rewalls
pessoais podem solicitar permissão para executar o software ou o
programa. Você deverá permitir que o software seja executado a
m de continuar.
A tela Welcome (Bem-vindo) será
exibida no monitor.
OBSERVAÇÃO: Se for solicitado,
selecione seu idioma preferencial.
Em seguida, clique em Next
(Avançar) ou Install (Instalar).
Clique no botão Click Here to Start
(Clique aqui para iniciar).
A.
B.
Insira o CD-ROMInsira o CD-ROM
Click Here to StartClick Here to Start
Instalação1�
Andere Handbücher für WPC54G
2
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Sprachen:
Andere Cisco Adapter Handbücher
Cisco
Cisco Linksys WUSB600N Bedienungsanleitung
Cisco
Cisco PA-2JT2 Bedienungs- und Wartungsanleitung
Cisco
Cisco PA-100VG Bedienungs- und Wartungsanleitung
Cisco
Cisco ATA 191 Technisches Datenblatt
Cisco
Cisco SPA112 Bedienungsanleitung
Cisco
Cisco ATA 190 Bedienungsanleitung
Cisco
Cisco AIR-CB21AG-W-K9 Bedienungsanleitung
Cisco
Cisco Small Business SPA8800 Bedienungsanleitung
Cisco
Cisco ATA 191 Bedienungsanleitung
Cisco
Cisco SPA112 Bedienungsanleitung
Cisco
Cisco Linksys PCM1000 Bedienungsanleitung
Cisco
Cisco ATA 191 Bedienungsanleitung
Cisco
Cisco PA-2CT1 Bedienungs- und Wartungsanleitung
Cisco
Cisco Small Business SPA2102 Bedienungsanleitung
Cisco
Cisco WUSB54GC-RM - Refurb Wireless-g Compact USB Bedienungsanleitung
Cisco
Cisco PA-2E3 Bedienungs- und Wartungsanleitung
Cisco
Cisco Small Business Pro SPA3102 Bedienungsanleitung
Cisco
Cisco WUSB100 Bedienungsanleitung
Cisco
Cisco WPC54GX Bedienungsanleitung
Cisco
Cisco ATA 186 Installationsanleitung
