Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung

Phone Guide

Cisco Unified IP Conference Station 7936

License and Warranty

1Getting Started

2Installation

3Features and Functions

4Cisco Unified IP Conference Station 7936 Web Interface

5Using the Cisco Unified IP Conference Station 7936

6General Troubleshooting Information

7Obtaining Documentation

8Documentation Feedback

9Obtaining Technical Assistance

10 Obtaining Additional Publications and Information

11 Cisco One-Year Limited Hardware Warranty Terms

1 Getting Started

This guide helps you quickly set up and use the Cisco Unified IP Conference Station 7936

(Cisco model number CP-7936). The IP Conference Station requires Cisco Unified CallManager, and

your system administrator must prepare the network for the IP Conference Station. Verify with your

system administrator that the network is ready for the IP Conference Station. Be sure to read Release

Notes for Cisco Unified IP Conference Station 7936 and both the “Package Contents” section on

page 2 and the “Safety Notices” section on page 3 before you begin to set up and use the IP Conference

Station.

Note If your IP Conference Station is already set up, skip to the “Features and Functions” section

on page 17.

Introduction

The Cisco Unified IP Conference Station 7936 is an IP-based, hands-free conference room station that

uses Voice over IP (VoIP) technology. The IP Conference Station replaces a traditional analog

conferencing unit by providing business conferencing features—such as Call Hold, Call Resume, Call

Transfer, Call Release, Call Pickup, Group Pickup, Redial, Mute, and Conference—over an IP

network.

The Cisco Unified IP Conference Station 7936 features two outboard microphone jacks to enable the

use of optional, external microphones. Along with its enhanced speaker design, the IP Conference

Station is ideal for use in larger-sized conference rooms to facilitate conference calling. The

Cisco Unified IP Conference Station 7936 can also be ordered without external microphones for use

in smaller offices and conference rooms.

Package Contents

Review the following list to be sure that you have received all of the necessary items to install the

Cisco Unified IP Conference Station 7936.

•One Cisco Unified IP Conference Station 7936

•One 6-foot CAT 5 Cable

•One 25-foot CAT 5 Cable

•One Power Interface Module (PIM)

•One Power Supply Unit (a country-specific power cord must be ordered separately)

•Optional External Microphone Kit (with two external microphones), ordered separately

•One Regulatory Compliance and Safety Information Guide

Safety Notices

These are the safety considerations for using the IP Conference Station. Read these notices before you

install or use the IP Conference Station.

Statement 1071—Warning Definition

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause

bodily injury. Before you work on any equipment, be aware of the hazards

involved with electrical circuitry and be familiar with standard practices for

preventing accidents. Use the statement number provided at the end of each

warning to locate its translation in the translated safety warnings that

accompanied this device.

Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die

lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat

werken, dient u zich bewust te zijn van de bij elektrische schakelingen

betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken

om ongelukken te voorkomen. Gebruik het nummer van de verklaring

onderaan de waarschuwing als u een vertaling van de waarschuwing die bij

het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia

vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien

käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin

ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen

mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta

varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une

situation pouvant entraîner des blessures ou des dommages corporels. Avant

de travaillersur un équipement, soyez conscient des dangers liés auxcircuits

électriques et familiarisez-vous avec les procédures couramment utilisées

pour éviter les accidents. Pour prendre connaissance des traductions des

avertissements figurant dans les consignes de sécurité traduites qui

accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la

fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die

zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit

den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur

Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung

angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den

übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät

ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe

causare infortuni alle persone. Prima di intervenire su qualsiasi

apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti

elettrici e conoscere le procedure standard per la prevenzione di incidenti.

Utilizzareilnumerodiistruzionepresenteallafinediciascunaavvertenza per

individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er ien situasjon som kanføre til skade

på person. Før du begynner å arbeide med noe av utstyret, må du være

oppmerksom på farene forbundet med elektriske kretser, og kjenne til

standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver

advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som

fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Estesímbolo deaviso significaperigo. Você estáemuma situaçãoque poderá

ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer

equipamento, tenha conhecimento dos perigos envolvidos no manuseio de

circuitoselétricosefamiliarize-secomas práticashabituaisdeprevenção de

acidentes. Utilizeo número dainstrução fornecido ao final de cada aviso para

localizar sua tradução nos avisos de segurança traduzidos que acompanham

este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física.

Antes de manipular cualquier equipo, considere los riesgos de la corriente

eléctrica y familiarícese con los procedimientos estándar de prevención de

accidentes.Al final de cada advertenciaencontraráel número que le ayudará

a encontrar el texto traducido en el apartado de traducciones que acompaña

a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan

ledatill personskada.Innan du utförarbete på någonutrustning måstedu vara

medveten om farorna med elkretsar och känna till vanliga förfaranden för att

förebygga olyckor. Använd det nummer som finns i slutet av varje varning för

att hitta dess översättning i de översatta säkerhetsvarningar som medföljer

denna anordning.

SPARA DESSA ANVISNINGAR

Statement 1007—TN and IT Power Systems

Warning

This equipmenthas been designed for connection to TN and IT power systems.

Statement

1007

Waarschuwing

Deze apparatuur is ontworpen voor verbindingen met TN en IT

energiesystemen.

Varoitus

Tämä laitteisto on suunniteltu yhdistettäväksi TN- ja

IT-sähkövoimajärjestelmiin.

Attention

Ce matériel a été conçu pour être connecté à des systèmes d'alimentation TN

et IT.

Warnung

Dieses Gerät ist so konstruiert, daß es an TN- und IT-Stromsysteme

angeschlossen werden kann.

Warning

Read the installation instructions before you connect the system to its power source.

Warning

Onlytrainedandqualifiedpersonnelshouldbeallowedto install,replace,orservicethis

equipment.

Avvertenza

Questa apparecchiatura è stata progettata per collegamenti a sistemi di

alimentazione TN e IT.

Advarsel

Dette utstyret er utformet for å kunne kobles til TN- og IT-strømsystemer.

Aviso

Este equipamento foi criado para ligações a sistemas de corrente TN e IT.

¡Advertencia!

Este equipo se ha diseñado para ser conectado a sistemas de alimentación

tipo TN o IT.

Varning!

DennautrustningharkonstrueratsföranslutningtillelkraftssystemavTN-och

IT-typ.

Warning

Ultimate disposal of this product should be handled according to all national laws and

regulations.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning

activity.

Warning

To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to

telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN

ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use

caution when connecting cables.

Warning

This product relies on the building's installation for short-circuit (overcurrent)

protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15 A U.S.

(240 VAC, 10 A international) is used on the phase conductors (all current-carrying

conductors).

Warning

The plug-socket combination must be accessible at all times because it serves as the

main disconnecting device.

Caution The Cisco Unified IP Conference Station 7936 is inoperable during a power outage if it is

not supported by a UPS (uninterruptible power supply) when using a local power supply

unit. This affects your ability to reach 911.

Caution Using a cell, mobile, or GSM phone, or a two-way radio in close proximity to a

Cisco Unified IP Phone might cause interference. For more information, refer to the

manufacturer’s documentation of the interfering device.

Note To see additional safety warnings and translations of the safety warnings that appear in this

publication, refer to the Regulatory Compliance and Safety Information for the

Cisco Unified IP Phone 7900 Series that is shipped with your Cisco Unified

IP Conference Station 7936.

Using External Devices with Your Cisco Unified IP Phone

The following information applies when you use external devices with the Cisco Unified IP Phone:

•Depending on the quality of these devices and their proximity to other devices such as mobile

phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends

that you take one or more of the following actions:

–

Move the external device away from the source of the RF or AF signals.

–

Route the external device cables away from the source of the RF or AF signals.

–

Use screened cables for the external device, or use cables with a better screen and connector.

–

Shorten the length of the external device cable.

–

Apply ferrites or other such devices on the cables for the external device.

•Cisco cannot guarantee the performance of the system because Cisco has no control over the

quality of external devices, cables, and connectors. The system will perform adequately when

suitable devices are attached using good quality cables and connectors.

Caution In European Union countries, use only external speakers, microphones, and headsets that

are fully compliant with the EMC Directive [89/336/EC].

For more information on regulatory compliance and safety information, refer to the Regulatory

Compliance and Safety Information for the Cisco Unified IP Phone 7900 Series.

Accessibility Features

A list of accessibility features is available upon request.

2 Installation

This section provides basic installation instructions and information about obtaining optimal

performance with the Cisco Unified IP Conference Station 7936.

Andere Handbücher für 7936 - IP Conference Station VoIP Phone

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco Codec C Series Bedienungsanleitung

Cisco

Cisco TANDBERG Quick Set C20 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90 Bedienungsanleitung

Cisco

Cisco Webex Codec Pro Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Bedienungsanleitung

Cisco

Cisco ONS 15454 Series Bedienungsanleitung

Cisco

Cisco Profile Series Bedienungsanleitung

Cisco

Cisco GW 3340 Bedienungsanleitung

Cisco

Cisco TelePresence CE9.13 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90 Bedienungsanleitung

Cisco

Cisco Webex Room Panorama Service-Handbuch

Cisco

Cisco MX200 G2 Bedienungsanleitung

Cisco

Cisco Spark Room 70 Single Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C40 Service-Handbuch

Cisco

Cisco Webex Room 70 Dual Bedienungsanleitung

Cisco

Cisco Quick Set C20 Bedienungsanleitung

Cisco

Cisco Catalyst 3000 Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Bedienungsanleitung

Cisco

Cisco MX200 G2 Bedienungsanleitung

Cisco

Cisco 7937G - Unified IP Conference Station VoIP... Bedienungsanleitung

Cisco

Cisco UC500 series Installationsanleitung

Cisco

Cisco EX90 Service-Handbuch

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung