Cisco Codec C Series Bedienungsanleitung

Software version TC7.0

DECEMBER 2013

VIDEO SYSTEMS GETTING STARTED GUIDE

• Codec C Series

• MX Series

• EX Series

• Profile Series

• Quick Set C20

• SX20 Quick Set

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Thank you for choosing Cisco!

Your Cisco product has been designed to give you many years

of safe, reliable operation.

This part of the product documentation is aimed at admin-

istrators working with the setup of the Cisco TelePresence

products running TC software.

Our main objective with this Getting started guide is to

address your goals and needs. Please let us know how well

we succeeded!

Please visit the Cisco web site regularly for updated versions

of this guide.

The user documentation can be found on

http://www.cisco.com/go/telepresence/docs.

How to use this guide

The top menu bar and the entries in the Table of contents are

hyperlinks. You can click them to go to the topic.

Table of contents

Introduction ......................................................................... 3

About this guide......................................................................4

User interfaces .....................................................................5

User interfaces ...................................................................... 6

Configuration........................................................................7

How to configure your system............................................... 8

About user roles, user accounts and passwords .................. 8

Configuration tasks................................................................ 9

Configuration using the Touch controller..............................12

Provisioning set-up..........................................................13

Configuring IP ..................................................................14

Configuring H.323 and SIP ..............................................15

Setting date, time and location........................................16

Configuration using the remote control and on-screen menu ... 17

Provisioning set-up..........................................................18

Configuring IP ..................................................................19

Configuring H.323 and SIP ............................................. 20

Setting date, time and location........................................21

Setting the Administrator settings menu password ........22

Configuration using the web interface................................. 23

Provisioning set-up..........................................................24

Configuring IP ................................................................. 25

Configuring H.323 and SIP ............................................. 26

Setting the date, time and location..................................27

Setting the system/codec password.............................. 28

Setting the menu password .......................................... 28

Appendices........................................................................ 29

How to use the Touch controller.......................................... 30

The Settings menu on the Touch controller..........................31

How to use the remote control and on-screen menu ..........32

Remote control details......................................................... 34

The on-screen menu system............................................... 36

How to use the web interface ..............................................37

The System Configuration page on the web interface ........ 38

Cisco VCS provisioning ...................................................... 39

User documentation on the Cisco web site ........................ 40

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Contents

CHAPTER 1

Introduction

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Introduction

About this guide

This document goes through the basic configuration of your

video conference system. In this guide, we also explain how

to use the remote control, the Touch controller, and the web

interface.

You can find the information about system assembly and

installation in the Installation guide for your product.

Cisco TelePresence products covered in this guide

• Codec C Series:

Codec C40

Codec C60

Codec C90

• EX Series:

EX90

EX60

• MX Series:

MX200

MX300

MX300 G2

• Profile Series using Codec C Series:

Profile 42”

Profile 52”/55”

Profile 52” Dual / 55” Dual

Profile 65”

Profile 65” Dual

• Quick Set C20 / C20 Plus

• SX20 Quick Set

User documentation

The user documentation for the Cisco TelePresence systems

running TC software includes several guides suitable for

various systems and user groups.

• Video conference room primer

• Video conference room acoustics guidelines

• Installation guides for the TelePresence systems

• Software release notes for the TC software

• Getting started guide for the TelePresence systems

• User guides for the TelePresence systems

- With a remote control

- With a Touch controller

• Quick reference guides for the TelePresence systems

• Administrator guides for the TelePresence systems

• Camera user guide for the PrecisionHD cameras

• API reference guides for the Codec C Series

• TC Console user guide for the Codec C Series

• Physical interfaces guides for the Codec C Series

• Regulatory compliance and safety information guide

•

Legal & licensing information for products using TC

software

Downloading the user documentation

You can download the user documentation from the Cisco

web site, go to: http://www.cisco.com/go/telepresence/docs

Guidelines for how to find the documentation on the Cisco

web site are included in the User documentation on the

Cisco web site appendix.

Software

You can download the software for your product from the

Cisco web site, go to:

http://www.cisco.com/cisco/software/navigator.html

Cisco contact

On our web site you can find an overview of the worldwide

Cisco contacts.

Go to:http://www.cisco.com/web/siteassets/contacts

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Introduction

CHAPTER 2

User interfaces

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

User interfaces

The principal operating device for your Cisco TelePresence

video conference system is either a remote control or a Touch

controller. The remote control is not available for the EX Series

and MX Series.

Additionally, you can configure your system through its web

interface, provided that the system is already connected to a

network and you know the IP address.

In the appendices we describe how to use the Touch control-

ler and the remote control and the on-screen menu. We also

describe how to navigate and use the web interface.

Touch controller

Remote control and on-screen

Web interface

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

User interfaces

CHAPTER 3

Configuration

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration

How to configure your system

Before you can start using your video conference system you

must set the basic configurations as described in this chapter.

Using a provisioning system, or configuring

each video conference system individually

Provisioning allows video conferencing network administrators

to manage many video systems simultaneously. In general,

you only have to put in the credentials of the provisioning

server to each video system; the rest of the configuration is

done automatically.

Without a provisioning system, you must configure each video

system individually. As a minimum, you must set the IP and

SIP/H.323 parameters. You should also set the correct time

and date.

Basic configuration with or without a provisioning system is

described in the remainder of this chapter.

Different user interfaces

We describe how to configure the video system using the

Touch controller, the remote control or the web interface.

We also describe how to set the menu password using the

command line interface.

The descriptions are marked with the following colors.

About user roles, user accounts and passwords

System/codec password

You need ADMIN rights to configure the system via web inter-

face and Touch controller.

User roles: A user must possess one or a combination of

several user roles. Three user roles exist, representing differ-

ent rights: ADMIN, USER and AUDIT. It is important to note

that these roles have non-overlapping rights.

A complete administrator user account with full access rights,

like the default admin user, must possess all three roles.

You can read more on how to create and manage user

accounts in the administrator guide for your product.

NOTE: Initially, no password is set for the default admin user.

We strongly recommend that you set a password for this user,

and any other users possessing an ADMIN role, to restrict

access to system configuration.

A warning on the screen of your video system indicates if no

administrator password is set. To remove the warning you

must set an administrator password.

Make sure to keep a copy of the password in a safe place.

You have to factory reset the unit if you have forgotten the

password.

On-screen menu password

NOTE: Initially, no menu password is set for the Administrator

menu. We strongly recommend that you set a menu password

to restrict access to the Administrator menu on the on-screen

display. The menu password can be set with the remote

control or on the web interface.

After setting the menu password, you need to enter it to

configure the video system when using a remote control.

The menu password, as from software version TC7.0, applies

only to the on-screen Administrator Settings menu. It does

not apply to the Administrator menu on the Touch 8 and

Touch 10 control panels.

Touch controller

Remote control

Web interface

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration

Configuration tasks

The initial configuration tasks are described on the following

pages. Click the Read more... hyperlink for the method you

want to use to find the task description.

Click the Back... button in the task description to go back

to this task overview.

Getting started

Here you can see how to wake up the system and start using

one of the user interfaces:

Touch controller Read more...

Web interface Read more...

Remote control

and on screen menu Read more...

Provisioning set-up

(when using a provisioning system)

Your system may be configured by an external provision-

ing system. This way a number of settings are provisioned

automatically, and you most likely do not have to set the IP,

H.323, SIP and Time and Date settings.

Choose one of the following methods to set-up the provision-

ing parameters:

Remote control

and on screen menu Read more...

Web interface Read more...

Touch controller Read more...

Setting the IP parameters

(when not set by a provisioning system)

Your video conference system must be connected to an IP

network. Both IP version 4 (IPv4) and IP version 6 (IPv6) are

supported. In both cases, the IP parameters can be assigned

automatically by the network, or you can set everything

manually.

Choose one of the following methods to set the IP parameters:

Web interface Read more...

Touch controller Read more...

Remote control

and on screen menu Read more...

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration

Configuration tasks (continued)

Setting the H.323 and SIP parameters

(when not set by a provisioning system)

To get online and ready to place and receive calls, your system

must be set up properly. Your system uses either the H.323

protocol or the SIP protocol for video calls.

Choose one of the following methods to set the H.323 and

SIP parameters:

Web interface Read more...

Touch controller Read more...

Remote control

and on screen menu Read more...

Setting date and time

(when not set by a provisioning system)

When setting up your video conference system, you should

check that the date and time settings are correct. Among

other things this information is used to time stamp messages

transmitted to gatekeepers and other network elements.

Choose one of the following methods to set the date and time:

Web interface Read more...

Touch controller Read more...

Remote control

and on screen menu Read more...

Setting the menu password

We strongly recommend that you set a password for the

Administrator Settings menu.

This menu, which is available on both the Touch controller and

the remote control, gives access to settings that affect the

behavior of the video conference system.

Choose one of the following methods to set-up the menu

password:

Remote control

and on screen menu Read more...

Web interface Read more...

Cisco TelePresence Video Systems

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Confirguration

Andere Handbücher für Codec C Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence DX80 Bedienungsanleitung

Cisco

Cisco MX200 G2 Bedienungsanleitung

Cisco

Cisco CTS 1000 - TelePresence System 1000 Video... Bedienungsanleitung

Cisco

Cisco MCU24 Installations- und Betriebshandbuch

Cisco

Cisco TelePresence MX700 Bedienungsanleitung

Cisco

Cisco UC500 series Installationsanleitung

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Cisco

Cisco TelePresence SpeakerTrack 60 Bedienungsanleitung

Cisco

Cisco 7935 - IP Conference Station VoIP Phone Bedienungsanleitung

Cisco

Cisco CTS-SX10-K9 Bedienungsanleitung

Cisco

Cisco TelePresence Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Gebrauchsanweisung

Cisco

Cisco TelePresence Touch 10 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C60 Bedienungsanleitung

Cisco

Cisco TelePresence CE9.13 Bedienungsanleitung

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence IX5000 Handbuch

Cisco

Cisco Quick Set C20 Service-Handbuch

Cisco

Cisco SX80 Bedienungsanleitung

Cisco

Cisco Aironet 3500 Series Referenzhandbuch

Cisco

Cisco TelePresence System 1100 Bedienungsanleitung

Cisco

Cisco Room Kit EQ Bedienungsanleitung

Cisco

Cisco MX200 G2 Service-Handbuch

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung