Cisco CTS-SX10-K9 Bedienungsanleitung

Cisco TelePresence SX10 Quick Set

Getting Started Guide

Cisco TelePresence SX10 Quick Set

Software version TC7.1

MAY 2014

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Cisco TelePresence SX10 Quick Set Getting Started Guide

Table of contents

Introduction............................................................................. 3

User documentation ................................................................. 4

Software ................................................................................... 4

Configuration .......................................................................... 5

User interfaces.......................................................................... 6

How to configure your system .................................................. 6

User roles, user accounts and password ................................. 7

Setup assistant ......................................................................... 8

Provisioning set-up ................................................................ 9

IP settings..............................................................................10

Web interface ..........................................................................11

Provisioning set-up ...............................................................12

Configuring IP........................................................................13

SIP configuration ...................................................................14

Setting the date, time and location .......................................15

Setting the system/codec password ....................................16

Appendices............................................................................17

On-screen menu and remote control ......................................18

Access Setup assistant ...........................................................19

Access the web interface....................................................... 20

How to use the web interface..................................................21

The System Configuration page ............................................. 22

Cisco VCS provisioning ......................................................... 23

User documentation on the Cisco web site............................ 24

Intellectual property rights ...................................................... 25

Cisco contacts ...................................................................... 25

Thank you for choosing Cisco!

Your Cisco product has been designed to give you many

years of safe, reliable operation.

May we recommend that you visit the Cisco web site

regularly for updated versions of this guide.

The user documentation can be found on

http://www.cisco.com/go/sx-docs

How to use this guide

The top menu bar and the entries in the table of contents are

all hyperlinks. You can click on them to go to the topic.

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Contents

Cisco TelePresence SX10 Quick Set Getting Started Guide

Chapter 1

Introduction

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Introduction

Cisco TelePresence SX10 Quick Set Getting Started Guide

This document goes through the basic configuration of your

video conference system. In this guide, we also explain how

to use the remote control and the web interface.

You can find the information about system assembly and

installation in the Installation guide for your product.

Products covered in this guide

• Cisco TelePresence SX10 Quick Set

User documentation

The user documentation for the Cisco TelePresence systems

running the TC software includes several guides suitable for

various user groups.

• Installation guides:

How to install the products

• Getting started guide:

Initial configurations required to get the system up and

running

• Administering TC Endpoints on CUCM:

Tasks to perform to start using the product with the Cisco

Unified Communications Manager (CUCM)

• Administrator guide (this guide):

Information required to administer your product

• Quick reference guides:

How to use the product

• User guides:

How to use the product

• Knowledge base articles

• Video conferencing room primer:

General guidelines for room design and best practice

• Video conference room acoustics guidelines:

Things to do to improve the perceived audio quality

• Software release notes

• Regulatory compliance and safety information guide

• Legal & license information

Downloading the user documentation

We recommend you visit the Cisco web site regularly for

updated versions of the user documentation. Go to:

http://www.cisco.com/go/sx-docs

Guidelines how to find the documentation

on the Cisco web site are included in the

User documentation on the Cisco web site appendix.

Software

You can download the software for your product from the

Cisco web site. Go to:

http://software.cisco.com/download/navigator.html

We recommend reading the Software Release Notes (TC7),

go to:

http://www.cisco.com/c/en/us/support/collaboration-

endpoints/telepresence-quick-set-series/products-

release-notes-list.html

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Introduction

Cisco TelePresence SX10 Quick Set Getting Started Guide

Chapter 2

Configuration

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Configuration

Cisco TelePresence SX10 Quick Set Getting Started Guide

User interfaces

The principal operating device for your Cisco TelePresence

SX10 Quick Set is the TRC6 remote control.

Additionally, you can configure your system through its web

interface, provided that the system is already connected to a

network and you know the IP address. In the appendices we

describe how to use the remote control and the on-screen

menu. We also describe how to navigate and use the web

interface.

How to configure your system

Before you can start using your SX10 you must set the basic

configurations as described in this chapter.

Using a provisioning system, or configuring each

video conference system individually

Provisioning allows video conferencing network administrators

to manage many video systems simultaneously. In general, you

only have to put in the credentials of the provisioning server

to each video system; the rest of the configuration is done

automatically.

Without a provisioning system, you must configure each video

system individually. As a minimum, you must set the IP and SIP

parameters. You should also set the correct time and date.

Basic configuration with or without a provisioning system is

described in the remainder of this chapter.

Getting started

How to wake up the system and start using one of the user

interfaces.

 Setup assistant

 Web interface

Provisioning

(when using a provisioning system)

Your system may be configured by an external provisioning

system. This way a number of settings are provisioned

automatically, and you most likely do not have to set the IP, SIP

and Time and Date settings.

 Setup assistant

 Web interface

IP parameters

(when not set by a provisioning system)

Your video conference system must be connected to an IP

network. Both IP version 4 (IPv4) and IP version 6 (IPv6) are

supported. In both cases, the IP parameters can be assigned

automatically by the network, or you can set everything

manually.

 Setup assistant

 Web interface

SIP parameters

(when not set by a provisioning system)

To get online and ready to place and receive calls, your system

must be set up properly. Your system uses the SIP protocol for

video calls, and is on by default.

 Web interface

Date and time

(when not set by a provisioning system)

When setting up your video conference system, you should

check that the date and time settings are correct. Among

other things this information is used to time stamp messages

transmitted to gatekeepers and other network elements.

 Web interface

The codec/system password

To restrict access to system configuration, we strongly

recommend that you set a password for your video conference

system.

This password is used when you sign in to the web and

command line interfaces for your system.

 Web interface

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Configuration

Cisco TelePresence SX10 Quick Set Getting Started Guide

User roles, user accounts and

password

You need ADMIN rights to configure the system via web

interface.

User roles: A user must possess one or a combination of

several user roles. Three user roles exist, representing

different rights: ADMIN, USER and AUDIT. It is important to note

that these roles have non-overlapping rights.

A complete administrator user account with full access rights,

like the default admin user, must possess all three roles.

You can read more on how to create and manage user

accounts in the administrator guide for your product.

NOTE: Initially, no password is set for the default admin user.

We strongly recommend that you set a password for this user,

and any other users possessing an ADMIN role, to restrict

access to system configuration.

A warning on the screen of your video system indicates if no

administrator password is set. To remove the warning you must

set an administrator password.

Make sure to keep a copy of the password in a safe place.

You have to factory reset the unit if you have forgotten the

password.

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Configuration

Setup assistant

When you start the system for the first time, the Setup

assitant runs automatically.

Start the Setup assistant

Navigate to the upper left corner on the home screen and

press OK on the remote control.

Navigate to Settings and press OK. Navigate to Setup

assistant and press OK. Follow the instructions on screen.

If the system does not show a menu on screen:

• Make sure the monitor is connected and has been

switched on.

• Make sure the remote control has batteries installed.

• Make sure the system is switched on.

If the system has just been switched on, wait a few minutes

to allow the system to start up.

If there is still no menu on screen, make sure the monitor

cable is connected to the video output connector. If in doubt,

see the installation guide for your product.

On-screen display

Cisco TelePresence SX10 Quick Set Getting Started Guide

Configuration

Back to task overview

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Provisioning set-up

(When using a provisioning system)

Start the Setup assistant

Navigate to the user name in the upper left corner, and select

Settings. Select Setup assistant. Navigate to Provisioning.

NOTE: When you start up the SX10 for the first time, the Setup

assistant starts automatically.

Choose provisioning infrastructure

Choose one of the following supported provisioning systems:

• Cisco VCS (Video Communication Server)

• Cisco UCM (Unified Communications Manager)

Cisco VCS

Contact your VCS provider to get the information needed.

Have a look at the Cisco VCS provisioning appendix for more

information on VCS provisioning.

Cisco UCM

Contact your UCM provider to get the information needed.*

You can find more details about setting up Cisco UCM

provisioning in the Administering TC endpoints on CUCM

guide

* The DHCP server can be set up to provide the External Manager address

automatically (DHCP Option 150). Any input set up here overrides the setting

provided by DHCP.

VCS

1. Enter IP address or DNS name of the Cisco

VCS and select ⎷to confirm the change.

2. Enter the Username, and Password, if

required, for authenticating the video system

with the provisioning server. Select ⎷to

confirm the change

CUCM

Enter IP address or DNS name, and select ⎷to

confirm the change. Select Apply to save.

3. Enter SIP Domain and select ⎷to confirm the

change.

4. Select Apply to confirm the changes.

Cisco TelePresence SX10 Quick Set Getting Started Guide

Configuration

Back to task overview

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

IP settings

(When not set by a provisioning system)

On the Setup assistant, you can select the IPv4 settings for the

system. If you wish to change the IP settings from the default

dual stack setting to either IPv4 or IPv6, you can do that on the

web interface.

The system’s IP configuration is by default set to dual stack.

This means that the network interface can operate on both

IP versions, and has both an IPv4 and an IPv6 address at the

same time. The IP parameters can be assigned automatically

by the network, or you can set everything manually.

If you want to set the parameters manually, please contact your

network administrator to obtain the required parameters.

If your system is provisioned automatically, these IP settings

may be overridden by the provisioning system.

If an IPv4 or IPv6 address is already assigned to the system,

you will find it under Settings: Navigate to the user name in the

upper left corner and select Settings.

To change the IPv4 settings for the call, navigate to the user

name in the upper left corner and select Settings. Select Setup

Assistant, and proceed to the IPv4 section.

Choose automatic or manual IP assignment

Select DHCP in the IP Assignment section if you

want automatic IP assignment; or Static if you

want to set the IP addresses manually.

If IP Assignment is Static: Set the IP addresses

Enter the IP Address, Subnet Mask and Gateway

address. A soft keyboard appears when you

select an input field. Select ⎷to confirm the

change

Select Next to save the changes.

Cisco TelePresence SX10 Quick Set Getting Started Guide

Configuration

Back to task overview

Contents

Introduction

Configuration

Appendices

Contact

SX10 Quick Set

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence DX70 Service-Handbuch

Cisco

Cisco TelePresence SX20 Einrichtungshandbuch

Cisco

Cisco TelePresence System Codec C60 Bedienungsanleitung

Cisco

Cisco Profile Series Montageanleitung

Cisco

Cisco EX Series Bedienungsanleitung

Cisco

Cisco 3515 MCU12 Installations- und Betriebshandbuch

Cisco

Cisco MXP Series Bedienungsanleitung

Cisco

Cisco Aironet 3500 Series Referenzhandbuch

Cisco

Cisco Webex Room 70D Bedienungsanleitung

Cisco

Cisco Cius Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Originalbetriebsanleitung

Cisco

Cisco TelePresence SX20 Service-Handbuch

Cisco

Cisco TelePresence Codec C-series Bedienungsanleitung

Cisco

Cisco EX90 Bedienungsanleitung

Cisco

Cisco Webex Room Kit Bedienungsanleitung

Cisco

Cisco Spark Room 70 Single Bedienungsanleitung

Cisco

Cisco MCU 5300 series Bedienungsanleitung

Cisco

Cisco Catalyst 3000 Bedienungsanleitung

Cisco

Cisco SX80 Bedienungsanleitung

Cisco

Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung

Cisco

Cisco TelePresence MX Series Service-Handbuch

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco Aironet 1000 Series Installations- und Betriebshandbuch

Cisco

Cisco 8865 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung