Cisco SX80 Bedienungsanleitung

Page 1 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

SX80 with Touchpad 10

User Guide

Rev 29Apr2019

Page 2 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

Table of Contents

OVERVIEW .....................................................3

BASIC NAVIGATION ..............................................4

GENERAL USE ..................................................5

Setup ......................................................................5

Camera Controls .............................................................6

Microphone..................................................................8

Volume .....................................................................9

Site to Site Calls ..............................................................9

Connecting to an MBT Site............................................................ 9

Connecting to a site outside the MBT Network ............................................ 10

Far End Control: Site to Site .......................................................... 10

Sharing Presentation: Site to Site ...................................................... 11

Screen Layout: Presentation - Site to Site ............................................... 11

Recent Calls and Favourites ....................................................12

Multi-Site Event Calls (MCU) ....................................................13

Connecting to a Multi Site (MCU) Call ................................................... 13

Screen Layout/Far End: No Presentation - Multi-Site ....................................... 14

Sharing Presentation: Multi Site ....................................................... 14

Screen Layout: Presentation - Multi Site ................................................ 15

Receiving and Ending Video Calls ................................................16

DUAL VIDEO ENABLED EQUIPMENT ................................17

TROUBLESHOOTING .............................................18

ADDITIONAL TRAINING INFORMATION ..............................19

VIDEOCONFERENCING ETIQUETTE ................................19

Page 3 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

This user guide will provide you with an overview and the knowledge to setup and use the SX80

videoconference solution and the Touchpad 10

Camera: high quality imaging device which

transmits images to the screen/monitor. The

camera movements are controlled by a wireless

infra-red (IR) remote control that controls a

variety of functions, both on the near and far

end.

OVERVIEW

The main components included with the SX80 and Touchpad 10 are the Camera, Codec, Ethernet Cable,

Microphone, Screen/Monitor and Touchpad. In some instances there may also be a router.

Codec: central part of the videoconferencing

equipment. The main task of the codec is the

compression of outgoing video, audio and data, the

decompression of the incoming information and the

transmission of this information between endpoints.

The name codec comes from a combination of the

two words compression and decompression.

Touchpad 10: used to place calls, adjust the volume,

navigate screens and select options. It controls

all functions of the videoconferencing equipment,

including moving the camera.

Screen/Monitor: built-in screen/monitor displays

the far end or the near end image and content as

selected by the user.

Main Components

Page 4 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

BASIC NAVIGATION

The Touchpad 10 is used to operate your video equipment and the system will not work without it. Here are

some commonly used features:

Basic Features of the Touchpad 10

General Use

Tap the Camera icon to

activate self-view and

camera settings.

Tap to Share content

outside of a call.

Tap Microphone

to mute/unmute

the microphone.

Press and hold the left side of the Volume

button to decrease the volume and the right

side to increase the volume.

Call (access

to Directory/

Favourites)

Tap the touchpad to wake

up the system if needed.

Tap a button to activate it’s

function.

Scroll in lists as on a smart

phone.

Tap the touchpad to wake

up the system if needed.

Page 5 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

GENERAL USE

The following sections will provide instructions for using your SX80 and Touchpad 10 solution to place

and receive videoconference calls.

Setup

Setup and Use the Equipment

Selfview

Wake the codec by tapping the touchpad and turn on the video screen/monitor if required. In a few seconds

you will see the home screen.

Before the meeting starts we recommend that you check the selfview. The selfview displays an image of

your camera view on screen and shows you what you will be sending to the other site. The selfview appears

as a PIP (Picture-in-Picture).

Outside a call:

During a call:

Tap Selfview to turn it on.

You may now maximize/

minimize, turn selfview

o󰀨, or tap Camera to

control your own camera.

Tap anywhere outside the

menu to exit.

Selfview

Tap anywhere outside the

menu to exit.

Tap Camera .

Tap Camera (a) and then tap

Selfview (b) to turn it on (you

may now resize the selfview

image or control the camera).

Page 6 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

The camera controls allow you to manually control the zoom, pan and tilt of the camera as well as dene

Camera Presets.

Camera Controls

Adjust Camera Manually

Move the Selfview PiP Box

Tap and hold the Selfview image. The selfview image will now turn blue. You will

also see the alternate positions available for the

selfview image. Keep holding the image.

Release the image by lifting your nger

from the screen. The selfview image has

now assumed its new position.

Drag the image to a new position, shown

here is the upper left corner.

Tap Camera to invoke the

camera adjustment menu.

Tap the desired

Camera Preset.

Turn Selfview

On and O󰀨.

Maximize/minimize

Selfview.

Pan/tilt controls.

(arrows)

Zoom in and out

(+/-).

Page 7 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

Use Camera Presets

Add a New Preset

Camera presets are useful when images from many di󰀨erent camera positions and video sources are to

be viewed by the far end site(s). Presets are used to switch camera positions quickly and easily without

having to manually move the camera.

Tap Add New and then tap

in the text eld.

Tap Save to leave the menu putting changes into

e󰀨ect, or tap Cancel to leave menu and undo the

changes (tap anywhere outside the menu when

you’re done).

Key in a descriptive name.

Selfview will be activated

automatically. Use the arrows and

zoom +/- to adjust the camera to

the desired position.

Tap Camera to invoke the

camera adjustment menu.

Tap Camera to access the

Camera Presets (positions).

Tap the desired preset and then tap anywhere

outside the menu to exit.

Page 8 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

Modify Existing Preset

Standard Presets

Mute and Unmute the Microphone

The SX80 with Touch 10 is set up with three (3) Standard Presets: Camera presets will be set up and

saved as part of equipment implementation but there may be a need to change or resave presets.

Sign – shows the site’s sign with their site name. This is an o󰀨 screen camera view that allows

users to move about the room without being on camera and identies the sites that are

connected.

Participant (Presenter/Provider/Patient) – close up view of the person or persons involved in the

event. Whether it is the patient, provider or a presenter, when setting this preset, you want to

ensure that the far sites are able see the person clearly.

Room –shows a view of everyone in the room. By setting a preset of the entire room, you can

easily identify everyone in attendance and then switch back to the participant preset as

necessary. This preset is also helpful for question and answer periods.

Microphone

Tap Camera to access the

camera menu.

Tap the preset to be edited. Selfview

will be activated automatically.

Use the arrows and zoom

+/- to adjust the camera.

Tap the little arrowhead of

the preset to be edited.

Tap anywhere outside the

menu to close it.

Tap Update to Current Position.

to put your changes into e󰀨ect.

To delete an existing preset tap Remove.

Mute and unmute the microphone.

Green Unmuted (site can hear you)

Red Mute (site cannot hear you)

Page 9 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

Adjust the Volume

TIP

Connect to an MBT Site

Volume

Site to Site Calls

Connecting to an MBT Site

If you call the same sites from the same equipment you can save the contact

to the favourites list on that equipment. The next time you need to call the site,

tap Call, and then tap Favorites to locate the site rather than scroll through the

entire address book.

Tap Call.

Tap Call to connect.

Tap End to disconnect.

Tap in the search/dial eld to invoke

the keypad. (Tap the keypad icon in

the bottom left corner of the screen if

required.)

Type in the 5 digit number.

Use the

ABC/123

key to toggle

between alpha

and numeric.

Press and hold the left side of the Volume button to decrease the volume and the

right side to increase the volume.

The Home screen should always be displayed prior to connecting to a site; if not, this may mean that

a previous call was not disconnected. If you do not see the Home screen, press End to disconnect

prior to connecting to your site.

...

Page 10 of 19

MBTelehealth - SX80 with Touchpad10 User Guide

Connect to a Site Outside the MBT Network

Connecting to a site outside the MBT Network

Far End - Site to Site

Taking far end camera control allows you to move the camera at the far end site. Before taking control,

always request permission rst. You may need to take far end camera control if the person on the other

end is unable to operate their own camera.

Far End Control: Site to Site

In a call, tap the

Participants icon in

the top right corner

to invoke the list of

participants.

Tap the site whose

camera you want to

control.

Tap Camera. Adjust the remote camera. Tap

anywhere outside the camera

control buttons when you’re done to

return to near end (control of your

own camera).

Tap Call.

Tap Call to connect.

Tap End to disconnect.

Tap in the search/dial eld to invoke

the keypad. (Tap the keypad icon in

the bottom left corner of the screen if

required.)

Type in the phone number.

Use the

ABC/123

key to toggle

between alpha

and numeric.

...

Andere Handbücher für SX80

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence SX20N Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90 Bedienungsanleitung

Cisco

Cisco 7750 Bedienungsanleitung

Cisco

Cisco EX90 Service-Handbuch

Cisco

Cisco TelePresenceSX10 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco DX series Bedienungsanleitung

Cisco

Cisco Service Manual Bedienungsanleitung

Cisco

Cisco TelePresence DX80 Bedienungsanleitung

Cisco

Cisco TelePresence Touch 10 Bedienungsanleitung

Cisco

Cisco Telepresence MX800 Leitfaden

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Cisco

Cisco TelePresence MX700 Service-Handbuch

Cisco

Cisco Spark Room Kit Plus Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence IX5000 Bedienungsanleitung

Cisco

Cisco 7937 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Service-Handbuch

Cisco

Cisco TelePresence MCU 4505 Bedienungsanleitung

Cisco

Cisco TelePresence IX5000 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence SpeakerTrack 60 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco 7935 - IP Conference Station VoIP Phone Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung